Give your [IKEA VAPPEBY](https://www.ikea.com/se/en/p/vappeby-bluetooth-speaker-white-gen-3-80517377/) Gen3 Speaker a sophisticated transformation with this GRID kit. This download includes the pictured Cover, Volume Dial (+ Bonus Studio Dial), and Grid Handle. (The power button can be downloaded seperately [here](https://than.gs/m/1274542?affiliateCode=MAKE))

---

**_Printing Guidelines_**

**Handle:**
- 0.16 mm layer height
- 4+ walls, 15%+ infill (use your discretion to make a strong part depending on the filament you use)
- No supports required

**Volume Dial and Cover:**
- 0.16mm layer height
- 2 walls, 15% infill
- No supports required
- For the Volume Dial, start with an opaque filament, and swap to a transparent filament above 2.4mm if you want the sides to light up (I also did a few layers of Black between the white and green to block more light from the front)*

          *For the Studio Dial, start with an opaque filament, and swap to a transparent filament above 8mm (at Z height 11mm if you want it to line up with the cover)

---

**_Assembly_**

**Handle:**
- Use the original screws for the stock VAPPEBY handle to connect this part
- Do not overtighten the 3D printed screw. That will cause the layers to be ripped apart.

**Cover:**
- Print four of the cover pins. Connect them to the back corners of the cover with a 1/4 twist clockwise (You can use pliers if the fit is tight).
- Cover should press fit into the existing rubber holes on the speaker.

**Studio Dial:**
- Optionally print the 'Studio Dial_Indicator' in another color and glue it into the divot on the Dial for an orbiting indicator (the orange dot shown in the photos).

_Feel free to leave a comment if you have any questions!_

---

**Filaments Used in Photos:**
- [Elegoo Rapid PLA+ White and Black](https://shrsl.com/4vqfx) (Also on [Amazon](https://amzn.to/4iioPSQ))
- [Bambu PETG Translucent 'Olive Green'](https://shrsl.com/4vz09)

**Printer Used:**
- [Qidi Plus4 3D Printer](https://qidi3d.com/products/plus4-3d-printer?sca_ref=6089281.BQS8d0sJuF) (Also [on Amazon](https://amzn.to/4jON7VK)) 

*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_*. 

IKEA VAPPEBY GRID Kit // Cover, Volume Dial, and Handle

VAPPEBY_Cover_Grid.stl

_A cryptex is a portable, puzzle-like container, typically cylindrical, that stores a secret message or items behind a combination lock._


---
This cryptex looks like a Mark 2 hand grenade, with four numbered dials that make up the main shell of the grenade. Similar to [my other cryptex on MakerWorld](https://makerworld.com/en/models/1450159-number-cryptex-configurable-puzzle-container#profileId-1510514), it has ratcheting encoding rings that can be used to set any 4-digit passcode you want! And turning the dials is super satisfying thanks to the ratchet!

There are three different versions of the dials you can print:
- Plain — No numbers at all if you want to paint them yourself
- Inset numbers — The numbers are inset holes on the dial
- Embedded numbers — The numbers are embedded and can be painted in the slicer

If you add a small spring to the fuse, you can make the safety lever, "spoon", to pop off when the pin is pulled, just like in a real grenade!

&nbsp;

---
**Printing tips:**
The parts are already oriented optimally. _Inner cylinder_, _Fuse_ and _Safety lever_ need supports. Use tree supports for the _Safety lever_.

If you're using Orca Slicer or Bambu Studio, a handy project file is included that has my print settings and painted parts ready to go!

&nbsp;

---
**Assembly**
You'll need an optional spring, 0.5x5x25mm recommended, for the safety lever action. But the cryptex works just fine without it, it's just a little fun bonus! You can also use a keyring for the safety pin ring, or use a printable ring.

No other hardware required to assemble! If you have printed the *bolt tool* included with [my previous cryptex on MakerWorld](https://makerworld.com/en/models/1450159-number-cryptex-configurable-puzzle-container#profileId-1510514), it will also work for this installation! If not, the tool is included here as well! Or you can use a flat- or hex head screwdriver too.

See the included assembly guide video!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

Hand Grenade Cryptex — Configurable 4-digit puzzle container

Grenade Cryptex - Bambu Project.3mf

Take your shelf or freezer storage organization to the next level with the Logical Crate System.  This is a 100% printed, snap-together, reconfigurable, strong and stackable crate system.  Designed for maximum flexibility, this set lets you create crates in multiple lengths to perfectly fit any space, and reconfigure your setup whenever you need to.  Other width series are also available and can be used together to fill varying widths.  

Whether you’re organizing shelves, fridges, freezers, workshops, or craft rooms, this system gives you the options to build what you need.

**What’s Included in the Logical Crate System - 184mm Width Series**
- 6 wall lengths (A–F) – lengths from 5.67" (144mm) to 10.39" (264mm)
- Middle Connector – combine wall lengths for extended crate lengths
- Crate Ends – use two Crate End for all builds
- Writable Snap-On Label Cards – for quick crate labeling
- Illustrated assembly and disassembly guides

**Key Features**
- Create any size crate in the 184mm width range
- Mix and match wall lengths for perfect fit in any space
- Build single-length crates or combine with Connector for extra-long storage
- Fully modular — reconfigure or stack crates as needed
- 100% 3D printed, no hardware or supports required
- Freezer & fridge compatible (PETG suggested)

**Works with Other Widths**
The 184mm Complete System is part of the Logical Crate family, which also includes:
- 136mm width series
- 160mm width series
All widths work together to fill shelves, fridge/freezer compartments, and custom storage layouts.

**Related Links**

Logical Crate System - 136mm Width Series
https://than.gs/m/1402894

Logical Crate System - 160mm Width Series
https://than.gs/m/1402912

Logical Crate Label Series
https://than.gs/m/1402936

**Visit my blog for more details and other designs**
https://www.logicalplanet.com/

**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.  Please email me at logicalplanet3d@gmail.com if you would like me to make a revision or have comments about this design.



Logical Crate System - 184mm Width Series

End H174W184.stl

Take your shelf or freezer storage organization to the next level with the Logical Crate System.  This is a 100% printed, snap-together, reconfigurable, strong and stackable crate system.  Designed for maximum flexibility, this set lets you create crates in multiple lengths to perfectly fit any space, and reconfigure your setup whenever you need to.  Other width series are also available and can be used together to fill varying widths.  

Whether you’re organizing shelves, fridges, freezers, workshops, or craft rooms, this system gives you the options to build what you need.

**What’s Included in the Logical Crate System - 160mm Width Series**
- 6 wall lengths (A–F) – lengths from 5.67" (144mm) to 10.39" (264mm)
- Middle Connector – combine wall lengths for extended crate lengths
- Crate Ends – use two Crate End for all builds
- Writable Snap-On Label Cards – for quick crate labeling
- Illustrated assembly and disassembly guides

**Key Features**
- Create any size crate in the 160mm width range
- Mix and match wall lengths for perfect fit in any space
- Build single-length crates or combine with Connector for extra-long storage
- Fully modular — reconfigure or stack crates as needed
- 100% 3D printed, no hardware or supports required
- Freezer & fridge compatible (PETG suggested)

**Works with Other Widths**
The 160mm Complete System is part of the Logical Crate family, which also includes:
- 136mm width series
- 184mm width series
All widths work together to fill shelves, fridge/freezer compartments, and custom storage layouts.

**Related Links**

Logical Crate System - 136mm Width Series
https://than.gs/m/1402894

Logical Crate System - 184mm Width Series
https://than.gs/m/1402913

Logical Crate Label Series
https://than.gs/m/1402936

**Visit my blog for more details and other designs**
https://www.logicalplanet.com/

**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.  Please email me at logicalplanet3d@gmail.com if you would like me to make a revision or have comments about this design.



Logical Crate System - 160mm Width Series

End H174W160.stl

Take your shelf or freezer storage organization to the next level with the Logical Crate System.  This is a 100% printed, snap-together, reconfigurable, strong and stackable crate system.  Designed for maximum flexibility, this set lets you create crates in multiple lengths to perfectly fit any space, and reconfigure your setup whenever you need to.  Other width series are also available and can be used together to fill varying widths.  

Whether you’re organizing shelves, fridges, freezers, workshops, or craft rooms, this system gives you the options to build what you need.

**What’s Included in the Logical Crate System - 136mm Width Series**
- 6 wall lengths (A–F) – lengths from 5.67" (144mm) to 10.39" (264mm)
- Middle Connector – combine wall lengths for extended crate lengths
- Crate Ends – use two Crate End for all builds
- Writable Snap-On Label Cards – for quick crate labeling
- Illustrated assembly and disassembly guides

**Key Features**
- Create any size crate in the 136mm width range
- Mix and match wall lengths for perfect fit in any space
- Build single-length crates or combine with Connector for extra-long storage
- Fully modular — reconfigure or stack crates as needed
- 100% 3D printed, no hardware or supports required
- Freezer & fridge compatible (PETG suggested)

**Works with Other Widths**
The 136mm Complete System is part of the Logical Crate family, which also includes:
- 160mm width series
- 184mm width series
All widths work together to fill shelves, fridge/freezer compartments, and custom storage layouts.

**Related Links**

Logical Crate System - 160mm Width Series
https://than.gs/m/1402912

Logical Crate System - 184mm Width Series
https://than.gs/m/1402913

Logical Crate Label Series
https://than.gs/m/1402936

**Visit my blog for more details and other designs**
https://www.logicalplanet.com/

**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.  Please email me at logicalplanet3d@gmail.com if you would like me to make a revision or have comments about this design.



Logical Crate System - 136mm Width Series

End H174W136.stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for instructions and a complete look at the GEN2 collection.
_______________________

The EdgeLabel Series is a collection of modular drawer faceplates for the GEN2 Decor Series. These faceplates are designed to make labeling drawers simple while adding a clean, modern handle style that pairs nicely with the original GEN2 drawers.

V1.3 has been redesigned from the ground up to print faster, use less material, require less bridging, and install more easily. Accent pieces now attach using new mini dovetail clips instead of full-length rails, making larger faceplates much easier to assemble. The faceplates also snap into place more securely, with new locking clips available for upcoming v2602 Decor Drawers as an alternative to using M3 screws.

The EdgeLabel Series is designed to be easy to customize, whether you are using a multicolor 3D printer or a single-color printer with filament swaps. Print the accent pieces face down on a textured build plate for a great finished look, then add your own text, icons, or color combinations to match your setup.

Try it out first for free [⬇HERE](https://than.gs/m/1292349)

**V1.3 Compatibility Notes**

• Main EdgeLabel faceplates are fully backwards compatible with all GEN2 Decor Drawers.  
• New optional Faceplate Back Covers are only compatible with the upcoming v2602 Decor Drawers.  
• Some sizes are being made available ahead of the full v2602 Decor Drawer release.  
• New locking clips are designed for v2602 Decor Drawers and can be used as an alternative to M3 screws.  
• Many new sizes have been added, including support for larger drawer sizes such as 4W-2H.

**What You'll Need**

Visit **[Jerrari3D.com](https://www.jerrari3d.com/gen2-modular-system)** for a list of compatible GEN2 Decor Drawers.

**HARDWARE**  
_Includes affiliated links to help support my projects_

• Filament - PLA, PETG, or your preferred decorative filament  
• Optional M3 screws: M3x6 [(I prefer this kit)](https://amzn.to/3LSaQFv)  
• Optional locking clips for compatible v2602 Decor Drawers  

Find more GEN2 Decor Drawer options and sizes at **[Jerrari3D.com](https://www.jerrari3d.com/gen2-modular-system)**

---

## UPDATES

**UPDATE V1.3 (5-13-2026)**

• Faceplates have been redesigned from the ground up.  
• Redesigned to print faster, use less material, and require less bridging.  
• Accent pieces now attach using mini dovetail clips instead of full-length rails, making installation easier on larger faceplates.  
• Faceplates snap into place more securely.  
• New locking clips are compatible with v2602 Decor Drawers as an alternative to using M3 screws.  
• Optional Faceplate Back Covers added for upcoming v2602 Decor Drawers.  
• Many new sizes added, including larger drawer sizes such as 4W-2H.  

*Main faceplates are fully backwards compatible with all GEN2 Decor Drawers. Optional Faceplate Back Covers require v2602 Decor Drawers.*

**UPDATE V1.2 (3-15-2025)**

• This update introduced even more customization by splitting the faceplates into multiple parts that snap together with compliant mechanisms. Create beautiful faceplates even without a multicolor 3D printer.  
• Print accent pieces face down on textured plates for outstanding results.

**UPDATE V1.1 (1-20-2025)**

• This update removed the M3 nut slot and instead uses a new self-tapping hole for M3 screws.  
• Divided the faceplates to allow for an optional additional color if desired. This can also be toggled or modified for fun appearances.

---

## INSTRUCTIONS

See attached instructions.

GEN2 Decor - Faceplate - EdgeLabel

1w-3h-accent.stl

1w-3h-back-cover.stl

2w-1h-accent.stl

2w-1h-back-cover.stl

2w-2h-accent.stl

2w-2h-back-cover.stl

2w-3h-accent.stl

2w-3h-back-cover.stl

2w-05h-back-cover.stl

2w-15h-accent.stl

2w-15h-back-cover.stl

3w-1h-accent.stl

3w-1h-back-cover.stl

3w-2h-accent.stl

3w-2h-back-cover.stl

3w-05h-back-cover.stl

3w-15h-accent.stl

3w-15h-back-cover.stl

4w-1h-accent.stl

4w-1h-back-cover.stl

4w-2h-accent.stl

4w-2h-back-cover.stl

4w-05h-back-cover.stl

4w-15h-accent.stl

4w-15h-back-cover.stl

edgelabel-1w-2h.3mf

edgelabel-1w-3h.3mf

edgelabel-1w-3h.stl

edgelabel-2w-1h.3mf

edgelabel-2w-1h.stl

edgelabel-2w-2h.3mf

edgelabel-2w-2h.stl

edgelabel-2w-3h.3mf

edgelabel-2w-3h.stl

edgelabel-2w-05h.3mf

edgelabel-2w-05h.stl

edgelabel-2w-15h.3mf

edgelabel-2w-15h.stl

edgelabel-3w-1h.3mf

edgelabel-3w-1h.stl

edgelabel-3w-2h.3mf

edgelabel-3w-2h.stl

edgelabel-3w-05h.3mf

edgelabel-3w-05h.stl

edgelabel-3w-15h.3mf

edgelabel-3w-15h.stl

edgelabel-4w-1h.3mf

edgelabel-4w-1h.stl

edgelabel-4w-2h.3mf

edgelabel-4w-2h.stl

edgelabel-4w-05h.3mf

edgelabel-4w-05h.stl

edgelabel-4w-15h.3mf

edgelabel-4w-15h.stl

1w-1h-accent.stl

1w-1h-back-cover.stl

1w-2h-accent.stl

1w-2h-back-cover.stl

1w-05h-back-cover.stl

1w-15h-accent.stl

1w-15h-back-cover.stl

edgelabel-1w-1h.3mf

edgelabel-1w-1h.stl

edgelabel-1w-2h.stl

edgelabel-1w-05h.3mf

edgelabel-1w-05h.stl

edgelabel-1w-15h.3mf

edgelabel-1w-15h.stl

label-v13.stl

label-v13-bambu.3mf

label-v13-prusaslicer.3mf

This print-in-place parametric box is available in two versions and can be customized to your desired dimensions. The package includes source files for Fusion 360, allowing you to set your preferred dimensions, and the model will automatically adjust.For more on parametric design, check out this helpful video. To create different grid patterns on the model, simply choose your desired infill pattern in your slicer and set the top and bottom walls to 0mm.

Parametric self locking pip box

parametric pip modular box ext.stl

Customizable

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

IKEA VAPPEBY GRID Kit // Cover, Volume Dial, and Handle

Hand Grenade Cryptex — Configurable 4-digit puzzle container

Logical Crate System - 184mm Width Series

GEN2 Decor - Faceplate - EdgeLabel

Parametric self locking pip box