The can cozy itself does not need support. The Phoenix head does need support.  This model has two options to attach the head.  The normal dice chain, or you could use eight 3x2 magnets to secure the head on. There are two different versions of the cup here: one with gems and one without. This way you will have more space to customize it with the text editor in Bambu slicer to personalize it with your character name, or perhaps to print as a gift for a friend. I did attach some color files, but they are not tested. Please print at your own risk.

12oz Phoenix Can Cozy Dice Tower

12oz Phoenix  with jems.stl

Stop letting your laundry detergent cap ruin your laundry room! I custom-designed and 3D printed a slide-on detergent catch for a cleaner, smarter laundry room organization. This simple, custom home fix is stronger and more effective than any store-bought organizer. Homeowners and DIYers, this is the essential laundry room upgrade you need!

Laundry Detergent Drip Tray 

Detergent drip tray.stl

O'zapft is! (It's tapped!), and so Oktoberfest is about to begin (or has depending on when you see this). This stein can koozie is perfect for keeping the beverage cold during this wonderful season! Prost!

Printed in Panchroma Matte PLA - Charcoal Black
https://us.polymaker.com/products/panchroma-matte

Private Use Only.

Discord for Questions: https://discord.gg/7Fxpk3fkak 

Become a Thangs.com Maker Member for unlimited downloads or become a MERCHANT MEMBER for commercial use. 

Members get priority recommendations and customization. We would love for you to join!
Make sure to like and follow. Post your make so we can see!

Oktoberfest Stein Can Koozie

Oktoberfest.stl

I just added a 1 piece lid with straw. - This is for people not wanting to add the straw separately. 

This is the wildly popular Stanley Keychain Tumbler - 

1. NO SUPPORTS
2. Print at .12 layers
3. Use single color printer
4. Pause at height or color swap to get the "top" ring color
5. The Straw takes a lot of force to install. Put the straw in from the bottom, then press against a table with both your thumbs until it snaps in. I have uploaded a single piece lid and straw if you don't want to mess with it. 

I hope you enjoy. 

Tumbler Keychain, Viral, Version 2, with Logo, No Logo, Trend

Stanley Cup with Logo.stl

This latest addition to the **VESUVIUS Collection**, is a small cylindrical pot/container featuring the same dense herringbone ribs that increase part strength while creating a dramatic form.

VESUVIUS 003 is 50 mm tall and 94 mm in diameter. This was designed for use with my [140 mm Floating Drip Tray](https://than.gs/m/1036823?affiliateCode=MAKE) to catch excess water runoff.

**_Printing Guidelines_**

The **VESUVIUS** series of prints are designed to be printed in vase/spiral mode in your slicer. For full scale I suggest printing VESUVIUS 003 with a **0.8 mm nozzle width** (even with a 0.4mm nozzle) and 1.2mm of solid bottom layers. No top layers. **Make sure your slicer is not set to close small gaps.** In BambuStudio I set the _'Slice gap closing radius'_ to 0 mm

For the 'wHole' version of the vase mode print, use the maximum number of solid bottom layers before the holes are covered to avoid interfering with the spiral printing. You can also print the version without holes and simply drill/cut your own drainage holes in the bottom after printing if you plan on growing live plants.

I've also included a 'Solid' version for standard printing, with roughly 1.2mm thick walls. This will be extra strong, but uses much more material, and I've found the vase mode version to be preferable.

---

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Fillamentum PLA Extrafill Sky Blue and Signal Red](https://bit.ly/FM-xtra) (also at [MatterHackers](https://bit.ly/xtrafill)).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_

VESUVIUS Pot 003 // Small Cylinder Vase Mode Planter

VESUVIUS_003_1.2mmSolid_wHoles.stl

Looking for a special way to enjoy your favorite beverage? Discover the intricately detailed Dragon Tail Pint Glass Holder available on thangs.com. This impressive 3D model, specially designed by CL3D PRINTING, is perfect for making your everyday pint an adventurous affair. The dragon tail design not only adds a mythical feel to your drink but also keeps it nice and cold. Depending on your printer, this nifty bartending essential requires minimal support at the base of the tail. Remember, this dragon tail pint glass holder is designed for private use only, but you can always become a member for commercial licenses or for more exciting content. Check it out, and don't forget to like and share your creation! Turn your pleasurable sips into thrilling gulps with this unique dragon tail pint glass holder. Feel the coldness of a dragon’s breath in every drink – only at thangs.com.

Cup

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

12oz Phoenix Can Cozy Dice Tower

Laundry Detergent Drip Tray

Oktoberfest Stein Can Koozie

Tumbler Keychain, Viral, Version 2, with Logo, No Logo, Trend

VESUVIUS Pot 003 // Small Cylinder Vase Mode Planter

Dragon Tail Pint Glass Holder / Koozie