Christmas Teardrop Ornament 5

Use this version if you want to create your own supports. I recommend printing the version with built-in supports first.

Teardrop 2021 v9.1.stl

Christmas Icicle Ornaments (2)

Lattice_Icicle_with_No_Supports.stl

Retro Arcade Stand Compatible with Switch Original/OLED

SwitchArcade(Side1)(Brick)(Updated).stl

Filament Clip

GPU Support

GPU Support 72mm.STL

Ender-3 Max Camera Mount

Ender-3 Max camera mount. Uses the screws on the front of the extrusion frame.
Glued a piece of tin steel to mount a magnet camera.
Might also fit other Ender models

Christmas Teardrop Ornament 2

Teardrop 2021 v3.4.stl

Iphone and Apple watch stand 2.3mf

gridfinity arduino.STL

MultiBoard Memory Card Storage, Expandable!

MultiBoardMemoryCardRight.stl

Command Strip Compatible Replacement Hook

Easter Egg Earring

Frame3x5.stl

Prusa sized iterations of Zack Freedman's Gridfinity organizational system.

These are just the frames in different widths and lengths.

Kaleidoscope Christmas Ball 1

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5100757.

I designed this using Affiinity Designer to create cross-sections and then did everything else in Blender. 

I designed theis to print easily, to be light, and to look elegant when printed in one color. I recommend using a metallic or silky filament (or spray paint the final print with a metallic paint). The metallic or silky highlights will catch the light and show off the complex geometry of the ornaments.

At 100%, this is 80mm wide, which is a nice size for trees 1.5 meter and larger. However, I scaled a similar design to 60% and it looks great. At that size, it will work well on trees as small as 0.5 meter high. You may be able to scale this down slightly smaller than 60%, but I haven't tried it. If you do and it works, please post a comment.

PRINT SETTINGS

To make the print as light as possible, I printed at just 0.4mm walls and 0.45mm top/bottom thickness. I also used Cura's Support Blocker and Per Model Setting's "Modify Settings for Overlaps" to add 20% infill - but just for the bottom 6mm of the ornament. I recommend a layer height of 0.15mm.

You won't need a raft, but I recommend using a brim.

There are other parts of the ornaments that appear to need infill, but they are self-healing and do not show in the final print if you leave out the infill. Infill is really only needed to the bottom of the inside of the ornament. Adding infill everywhere will really increase the weight, which means it may not work on all Christmas trees.

For supports, I used:

- Support Placement: Everywhere
- Support Overhang Angle: 60 degrees
- Support Pattern: Concentric
- Support Density: 15%
- Enable Support Brim: Yes
- Support Brim: 3mm
- Support Roof Density: 75%
- Support Floor Density: 50%

If you print with 0.4mm walls and you wind up with holes in your print, I recommend increasing the flow rate slightly and maybe reduce travel and print speeds.


Frame3x4.stl

Troy Lee Designs GoPro Chin mount

Simple chin mount for TLD Stage helmet. No Supports needed. Recommend using thin foam between mount and chin bar to prevent rubbing and vibrations.

troy lee designs GoPro Chin mount

Nintendo switch cartridge Nightstand Insert

Nightstand Insert.stl

2.5" to 3.5" (SFF to LFF) HDD / SSD adapter (SATA and SAS, converter, mounting kit)

2.5in_to_3.5in_adapter_sff_to_lff_v11_threaded_insert_4.00mm.stl

Crystal Nintendo switch dock

Crystal Nintendo Switch Dock left.stl

Century Series Grip - F-4 Phantom Joystick + Many Aircraft - Updated B-8 Grip

Computers & electronics

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Christmas Teardrop Ornament 5

Christmas Icicle Ornaments (2)

Retro Arcade Stand Compatible with Switch Original/OLED

Filament Clip

GPU Support

Ender-3 Max Camera Mount

Christmas Teardrop Ornament 2

Iphone and Apple watch stand 2.3mf

gridfinity arduino.STL

MultiBoard Memory Card Storage, Expandable!

Command Strip Compatible Replacement Hook

Easter Egg Earring

Frame3x5.stl

Kaleidoscope Christmas Ball 1

Frame3x4.stl

Troy Lee Designs GoPro Chin mount

Nintendo switch cartridge Nightstand Insert

2.5" to 3.5" (SFF to LFF) HDD / SSD adapter (SATA and SAS, converter, mounting kit)

Crystal Nintendo switch dock

Century Series Grip - F-4 Phantom Joystick + Many Aircraft - Updated B-8 Grip