MULTICOLOR CHRISTMAS CROCHET GIFT BOX

v1+box+lower.stl

Snowflake Ornament 3

This is the 3rd variant of Snowflake ornaments.

Snowflake Ornament 2

This is the 2nd version of the Snowflake ornament.

St Nick - Santa Clause

262_StNick_PIXELandPLASTIC_RM.3mf

Frosty Snapman - Flat Base.stl

Frosty Snapman - Mid to Top with Face and Buttons.stl

Tabletop Cornhole Game! Print in Place

CORNHOLE.stl

M3D - Sabertooth Tiger Nutcracker

M3D-SBTNutcracker_thangs.stl

Frozen Computer Icicles

Display only do not print.stl

Kaleidoscope Christmas Ball 1

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5100757.

I designed this using Affiinity Designer to create cross-sections and then did everything else in Blender. 

I designed theis to print easily, to be light, and to look elegant when printed in one color. I recommend using a metallic or silky filament (or spray paint the final print with a metallic paint). The metallic or silky highlights will catch the light and show off the complex geometry of the ornaments.

At 100%, this is 80mm wide, which is a nice size for trees 1.5 meter and larger. However, I scaled a similar design to 60% and it looks great. At that size, it will work well on trees as small as 0.5 meter high. You may be able to scale this down slightly smaller than 60%, but I haven't tried it. If you do and it works, please post a comment.

PRINT SETTINGS

To make the print as light as possible, I printed at just 0.4mm walls and 0.45mm top/bottom thickness. I also used Cura's Support Blocker and Per Model Setting's "Modify Settings for Overlaps" to add 20% infill - but just for the bottom 6mm of the ornament. I recommend a layer height of 0.15mm.

You won't need a raft, but I recommend using a brim.

There are other parts of the ornaments that appear to need infill, but they are self-healing and do not show in the final print if you leave out the infill. Infill is really only needed to the bottom of the inside of the ornament. Adding infill everywhere will really increase the weight, which means it may not work on all Christmas trees.

For supports, I used:

- Support Placement: Everywhere
- Support Overhang Angle: 60 degrees
- Support Pattern: Concentric
- Support Density: 15%
- Enable Support Brim: Yes
- Support Brim: 3mm
- Support Roof Density: 75%
- Support Floor Density: 50%

If you print with 0.4mm walls and you wind up with holes in your print, I recommend increasing the flow rate slightly and maybe reduce travel and print speeds.


Christmas Cupcake Fidget Clickers

Pixeleena_Christmas Cupcakes.3mf

Christmas Decoration Style 6

Decoration Style 6 Type 1_STL.stl

Bit clicks: Holiday season

Bit_clicks_Deer_keychain.stl

Older than Google Art and Keyring

Older than Google (Thick).stl

Dog Paw Christmas Tree Ornament

This ornament features a paw print cutout to remember our fur babies around the holidays. Small support for the top ring but other than that very easy print, minimal cleanup around the edges. 

Christmas

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

MULTICOLOR CHRISTMAS CROCHET GIFT BOX

Snowflake Ornament 3

Snowflake Ornament 2

St Nick - Santa Clause

Frosty Snapman - Flat Base.stl

Tabletop Cornhole Game! Print in Place

M3D - Sabertooth Tiger Nutcracker

Frozen Computer Icicles

Kaleidoscope Christmas Ball 1

Christmas Cupcake Fidget Clickers

Christmas Decoration Style 6

Bit clicks: Holiday season

Older than Google Art and Keyring

Dog Paw Christmas Tree Ornament

Holiday Nunchaku – Chained Kit (No AMS, No Support, No Glue)

Santa Jack Decoration- Nomz

Starflakes Ornaments

Knitted Pickle Ornaments Bundle / Multiparts / No Supports

Grinch Bear that Cares - Articulated, Print in Place Care, Bear

SantaCam