EZPZ Pegboard Hook // 10mm Hook Type B

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 10mm depth and a shallow angle. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Large Bag Clip

large_bag_clip.step

Multiboard Paper Clip

Multiboard Paper Clip v1.stl

Carabiners Bundle

Carabiner__4.stl

IKEA Kallax Clip - Cables, Wires, LEDs

The IKEA Kallax Clip - Holds Cables, Wires, LEDs in a design that allows for easy removal with a nice print in place hinge design.

Nose Clip Anti-Fog

𝘗𝘳𝘪𝘯𝘵 𝘪𝘵 𝘶𝘱𝘴𝘪𝘥𝘦 𝘥𝘰𝘸𝘯 𝘢𝘴 𝘴𝘩𝘰𝘸𝘦𝘥 𝘪𝘯 𝘵𝘩𝘦 𝘱𝘳𝘦𝘷𝘪𝘦𝘸.

𝘕𝘰 𝘴𝘶𝘱𝘱𝘰𝘳𝘵 𝘯𝘦𝘦𝘥𝘦𝘥.
𝘠𝘰𝘶 𝘮𝘪𝘨𝘩𝘵 𝘸𝘢𝘯𝘵 𝘵𝘰 𝘶𝘴𝘦 𝘢 𝘣𝘳𝘪𝘮 𝘵𝘰 𝘩𝘢𝘷𝘦 𝘢 𝘣𝘦𝘵𝘵𝘦𝘳 𝘢𝘥𝘩𝘦𝘴𝘪𝘰𝘯.

NoseClip_M.stl

Mushroom bookmark “Morchella Esculenta”

Esculentafungus_bookmark_A.stl

Bulletin board

board_nails_tape.stl

EZPZ Pegboard Hook // 15mm Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 15mm depth. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Mushroom bookmark “Boletus Edulis”

mushroom.stl

Tickler SA-6 — Extended Accessories

Extended Barrel Body Vertical.stl

Snap Latch Connector - For Your Projects

slot.stl

EZPZ Pegboard Hook // 20mm Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 20mm depth. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Mouth Chip Clip from 3D Scan of Teeth

EZPZ Pegboard Hook // 25mm Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 25mm depth. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

A clip

a_clip.stl

EZPZ Pegboard Hook // 5mm Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 5mm depth. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Pegboard Hook // 10mm Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 10mm depth. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Parametric Hanging Clip

hanging_clip_20x20_1mm.stl

Simple Carabiner Clips - Style them your way!

Carabiner 112.stl

CLIP

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

EZPZ Pegboard Hook // 10mm Hook Type B

Large Bag Clip

Multiboard Paper Clip

Carabiners Bundle

IKEA Kallax Clip - Cables, Wires, LEDs

Nose Clip Anti-Fog

Mushroom bookmark “Morchella Esculenta”

Bulletin board

EZPZ Pegboard Hook // 15mm Hook

Mushroom bookmark “Boletus Edulis”

Tickler SA-6 — Extended Accessories

Snap Latch Connector - For Your Projects

EZPZ Pegboard Hook // 20mm Hook

Mouth Chip Clip from 3D Scan of Teeth

EZPZ Pegboard Hook // 25mm Hook

A clip

EZPZ Pegboard Hook // 5mm Hook

EZPZ Pegboard Hook // 10mm Hook

Parametric Hanging Clip

Simple Carabiner Clips - Style them your way!