| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 
__________________________________________________
The **[GEN2 Modular System](https://www.jerrari3d.com/gen2-modular-system)** is a 3D printable storage solution offering ultimate flexibility and customization. Perfect for home users, hobbyists, and small businesses, so you can print exactly what you need and customize every piece to fit your space and style.

Unlike store-bought sets, GEN2 lets you print only what you need and expand your setup whenever you want. The drawers snap together seamlessly, giving you endless expansion possibilities. With the unique QuickLock mechanism, rearranging or relocating drawers is quick and effortless, so your storage can grow and adapt with you.

**CLASSIC DRAWERS**
These drawers are based on the original GEN2 design, featuring a clean, functional layout with an integrated front handle. Designed for easy, one-piece printing without extra parts or assembly.

**270 Collection**
The 270 Collection takes drawer length a step further, built to take advantage of extended build plates like those on the Prusa XL and Bambu H2D. These oversized drawers offer generous storage in a single print, making them perfect for tools, cables, or larger parts that don’t fit in shorter units. If you’ve got the printer space, the 270 Collection makes sure you put it to good use. Find all the 270 models **[HERE](https://www.jerrari3d.com/gen2-modular-system/large)**

__________________________________________________

**STEP 1:** Location

Decide how you would like to use your GEN2 storage. Keep in mind that the drawers are modular and can be easily swapped between under table and table top locations. All drawers are available for mounting under the table using rails, but you can also place them on top of any surface with table top kits.

Find these kits at [JERRARI3D.com](https://www.jerrari3d.com/gen2-modular-system)

**[• UNDER TABLE (GEN2 RAILS)](https://www.jerrari3d.com/gen2-modular-system/rails)**
_Attach GEN2 drawers under any surface by installing the GEN2 RAILS. Once installed drawers can slide and lock into place, they can then be swapped out and rearrange in seconds._
**[• TABLE TOP KITS](https://www.jerrari3d.com/gen2-modular-system/table-top-kits)**
_Table Top Kits include covers and foot rails that when combined with drawer cases create a rigid structure that can be placed anywhere_

**What You'll Need**

Visit [Jerrari3D.com](https://www.jerrari3d.com/gen2-modular-system) for a list of all compatible drawers.


**HARDWARE**
Includes affiliated links to help support my projects
• Filament
     - [**PLA**](https://amzn.to/3GX8A1c) – Easy to print, works great for most parts
     - [**PETG**](https://amzn.to/45dtxNd) – Stronger and tougher, but can warp more
• Screwdriver
• Magnets (Optional): [10x2mm](https://amzn.to/3TC0v4X) or [6x2mm](https://amzn.to/3ZBheZ4)
• M3 nuts and screws: [Stainless-Steel](https://amzn.to/3Fq45LI) or [Steel](https://amzn.to/4msvHRb)

UNDER TABLE (GEN2 RAILS) HARDWARE
 • Countersunk woodscrews: (https://amzn.to/4l8Zb4o) or (Metric: 3.5x16mm or longer)
• Drill bit that is smaller diameter than the wood screws ([My Recommendation](https://amzn.to/45pC5SQ))
• Pen, Marker, or [Scratch Awl](https://amzn.to/44TbEEZ) (for installing under tables)
 

**INSTRUCTIONS**

🔧[**Visit Jerrari3d.com for Step-By-Step Instructions**](https://www.jerrari3d.com/gen2-modular-system/instructions)


Please note: The Non-Commercial license refers specifically to selling prints. You're absolutely welcome to use my designs in commercial environments—I actually encourage you to use them anywhere you see fit! 👍

GEN2 270-3W-1H Classic Drawer

270-3W-1H Classic Drawer.stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 
__________________________________________________
The **[GEN2 Modular System](https://www.jerrari3d.com/gen2-modular-system)** is a 3D printable storage solution offering ultimate flexibility and customization. Perfect for home users, hobbyists, and small businesses, so you can print exactly what you need and customize every piece to fit your space and style.

Unlike store-bought sets, GEN2 lets you print only what you need and expand your setup whenever you want. The drawers snap together seamlessly, giving you endless expansion possibilities. With the unique QuickLock mechanism, rearranging or relocating drawers is quick and effortless, so your storage can grow and adapt with you.

**CLASSIC DRAWERS**
These one-piece drawers print with the handle built in, no assembly needed. They’re quick, simple, and ready to use right off the bed. While they offer convenience, they don’t allow for the same material savings or faceplate customization as the Decor series.

__________________________________________________

**STEP 1:** Location

Decide how you would like to use your GEN2 storage. Keep in mind that the drawers are modular and can be easily swapped between under table, tabletop, and wall mount locations.

Find these kits at [JERRARI3D.com](https://www.jerrari3d.com/gen2-modular-system)

**[• UNDER TABLE (GEN2 RAILS)](https://www.jerrari3d.com/gen2-modular-system/rails)**
_Attach GEN2 drawers under any surface by installing the GEN2 RAILS. Once installed drawers can slide and lock into place, they can then be swapped out and rearrange in seconds._
**[• TABLE TOP KITS](https://www.jerrari3d.com/gen2-modular-system/table-top-kits)**
_Table Top Kits include covers and foot rails that when combined with drawer cases create a rigid structure that can be placed anywhere_
**[• WALL MOUNT KIT](https://www.jerrari3d.com/gen2-modular-system/instructions/wall-mount)**
_Mount GEN2 cases and drawers to almost any vertical surface using the GEN2 Wall Mount – Lite. Once installed, your layout is secure, modular, and easy to expand or rearrange anytime._

**What You'll Need**

Visit [Jerrari3D.com](https://www.jerrari3d.com/gen2-modular-system) for a list of all compatible drawers.


**HARDWARE**

🔧[**Listed in instruction manuals**](https://www.jerrari3d.com/gen2-modular-system/instructions)

**INSTRUCTIONS**

🔧[**Visit Jerrari3d.com for Step-By-Step Instructions**](https://www.jerrari3d.com/gen2-modular-system/instructions)


Please note: The Non-Commercial license refers specifically to selling prints. You're absolutely welcome to use my designs in commercial environments—I actually encourage you to use them anywhere you see fit! 👍

v2508

GEN2 115 Classic Drawers

115-1W-1H Case.stl

115-1W-1H Classic Drawer.stl

115-1W-2H Case.stl

115-1W-2H Classic Drawer.stl

115-1W-05H Case.stl

115-1W-05H Classic Drawer.stl

115-1W-15H Case.stl

115-1W-15H Classic Drawer.stl

115-2W-1H Case.stl

115-2W-1H Classic Drawer.stl

115-2W-2H Case.stl

115-2W-2H Classic Drawer.stl

115-2W-05H Case.stl

115-2W-05H Classic Drawer.stl

115-2W-15H Case.stl

115-2W-15H Classic Drawer.stl

Drawer Stoppers.stl

GEN2 QuickLocks V1.stl

GEN2-QL Locking Mechanism - Bi-Directional (Optional).stl

Magnet Insert - 6x2mm.stl

Magnet Insert - 10x2mm.stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 
_______________________
**THIS IS A SAMPLE FACEPLATE FROM THE [GEN2 Decor - Faceplates - EdgeLabel Series](https://than.gs/m/1215609)**
Feel free to use the faceplate as usual, if you enjoy the EdgeLabel faceplate please consider supporting the project by joining the [Jerrari Club ](https://thangs.com/designer/Jerrari)or by purchasing the full faceplate collection here: https://than.gs/m/1215609

The EdgeLabel Series is a collection of drawer faceplates for the GEN2 Decor Series. Simply print the drawer bodies and slide your personalized faceplate in place. Lock in place with an optional M3 screw and nut.

The EdgeLabel series is focused on functioning as a modular method to label drawers easily. The faceplates feature a built in handle than looks modern and pairs nicely alongside the original GEN2 drawers. They are designed to be easy to print using multiple colors not only on multicolor 3D printers, but single color printers as well.

**What You'll Need**
 
Visit **[Jerrari3D.com](https://www.jerrari3d.com/gen2-modular-system)** for a list of all compatible drawers.

This faceplate will fit any drawer that is 1W-1H in any of the lengths shown on jerrari3d.com, such as ones labeled 185-1W-1H.

**HARDWARE**
_Includes affiliated links to help support my projects_
• Filament - PLA (I used Prusa Orange PLA)
• M3 screws: M3x6 [(I prefer this kit)](https://amzn.to/3LSaQFv)
 
Find more GEN2 Decor Drawer options and sizes at **[Jerrari3D.com](https://www.jerrari3d.com/gen2-modular-system)**


**UPDATE** V1.2 (3-15-2025)
• This update introduces even more customization by splitting the faceplates into multiple parts that snap together with compliant mechanisms. Create beautiful faceplates even without a multicolor 3D printer.
• Print Accent pieces facedown on textured plates for outstanding results

**INSTRUCTIONS**
See attached instructions



GEN2 Decor - Faceplate - EdgeLabel Intro Edition

EdgeLabel 1W-1H.3mf

1W-1H Accent.stl

1W-1H Back Cover.stl

EdgeLabel 1W-1H.stl

A small pumpkin fidget with magnetic clicks.

**Customization**

_Core Options_
- Default
- Keychain - Includes a hole for a keychain ring. Glue is recommended if using this as a keychain fidget. 

_Theme Options_
- Plain
- Jack-o-lantern

_Effect Options_
- Click - The top and bottom halves of the fidget clap for a sharp click sound
- Rattle - Loose magnets rattle as jump between attract and repel pairs

_Magnet Options_
- 6x3mm magnets - Strongest force
- 3x3mm magnets - More magnet holes for greater customization

**Printing**
- Designed for 0.2mm layer heights
- All parts can be printed without supports
- Pause the print to embed magnets - Make sure magnets are oriented so that both sides of the fidgets will pull together.
- Optional: when printing the 3x3mm version, alternate magnet orientation between attract and repel for fewer click spots and a stronger snap.

**Assembly**
- Test screwing the top and bottom core parts together to make sure they fit well. You may need to wear them in a little if they are too tight.
- If the core parts are too loose, you may need to add glue during final assembly. - Keeping them unglued is recommended so you can reconfigure your fidget in the future.
- Attach the two sides of your fidget so that the magnets pull them together.
- Lock the two sides of the fidget together with the core.


**Can I sell copies of this?**

Yes! This project was shared under the [Creative Commons - Attribution](https://creativecommons.org/licenses/by/4.0/) license.

This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.

Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.

This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.
 

**Recommended Attribution Text**

"Pumpkin Twisty Fidget" (https://3dprinty.xyz/project/135) is designed by 3D Printy (https://3dprinty.xyz) and shared under a Creative Commons Attribution (CC BY 4.0) license (https://creativecommons.org/licenses/by/4.0/).

Pumpkin Twisty Fidget

Demo - All Files - 3x3mm.stl

Keychain Core.stl

Looking to add a playful Valentine’s touch to your desk? The Valentine's Day Portrait Fidget Clicker is here! This design features Cupid and the Devil framed in an elegant picture frame. Compatible with two types of mechanical keyboard switches, it offers a perfectly satisfying click every time. Whether you’re seeking sensory stimulation or a fun way to stay focused, this clicker is sure to become your favorite decorative fidget. Easy to print and assemble, it’s the perfect addition to your fidget collection for Valentine’s Day!

No AMS? No problem! They're also designed to look like statues!

**Print Settings**
- No brims required
- No supports required
- 8-10% infill.
- 2-3 walls
- 0.4mm nozzle
- 0.12mm layer height for the character designs, 0.12 - 0.2mm layer height everywhere else
- Use 3MF file if you want to use your AMS for the colored character

**Items Used:**
- Kailh Jade Switch: https://amzn.to/3Y5lbE3
- Cherry Blue Switch: https://amzn.to/3NmYTJ1
- Gold PLA: https://amzn.to/4h7oH9p
- Peach PLA: https://www.matterhackers.com/store/l/pro-series-pla/sk/MZE7T0ST?aff=7646
- Blue PLA: https://us.store.bambulab.com/products/pla-matte?variant=40489682075784
- White PLA: https://www.matterhackers.com/store/l/175mm-pla-filament-white-1-kg/sk/MEEDKTKU?aff=7646
- Red PLA: https://amzn.to/4gKdomY

**Important Note: Not suitable for young children. Contains small parts that may pose a choking hazard.**

**Assembly Video:**
https://youtu.be/mca5DW2ytFY

Valentine's Day Fidget Clicker - Portraits of Retro Cupid and Devil in a frame

pixelandpapier__vday_fidget_frame_clicker__frame.stl

The **Momentus Mind Camera** is a breakthrough device capable of capturing vivid memories and storing them directly in your brain. The incredibly satisfying and effective clicking noise triggers a Pavlovian response that your brain will come to associate with important memories. Made possible by navigating a narrow labyrinth of legal loopholes, you can now 3D print your own! So get out there and make some memories (at your own risk)!

This is the Basic Kit, which includes everything you need to make a functioning mind camera. For additional customization, check out the [Pro Kit here](https://than.gs/m/1076073?affiliateCode=MAKE). 

---

**_Printing Guidelines_**

_Watch the attached assembly video for detailed printing and assembly instructions!_

- 0.4mm nozzle, 0.16mm layer height, 3 walls, 10% infill, 5 top and bottom layers.
- All parts were designed to work with PLA, and should hold up for hundreds of snaps but a more resiliant material like PETG or ABS may increase shutter life. I would avoid softer PLA variants like silk/matte, especially for the Trigger. As always keep PLA parts out of hot environments.
- _Front_loose.stl_ part is included to compensate for imperfect prints, but it's highly suggested to use a tuned printer that works with the default parts for best operation.

- Designed to work with my printable [Keychain Loop](https://than.gs/m/1076066?affiliateCode=MAKE) or any [standard keychain](https://amzn.to/4bGq5wJ).
- No adhesives should be necessary, but if you want to glue parts together for extra strength, I suggest [E6000](https://amzn.to/3UIOdso).

Momentus Mind Camera Basic // Fidget Clicker + Memory Device

Front.stl

Available now for everyone to download for absolutely free!

Fast to print and easy to assemble, strong and portable - an addictive and advanced fidget based on the popular spiral fidgets also available now.

These work on a similar bases but with the added bonus of force feedback and a satisfying click. 

Comes with keychain slot.

Available commercially for subscribers only.

Separate pieces assembled together easily can be printed easily in multiple colors.

Can be printed with or without the clicker if you don't wish to include the click function.

The spring required needs to be approximately 30mm long when uncompressed with a maximum diameter of 9mm (you can use smaller if available to you)

The clicker is a cherry mx (keyboard switch) these and the spring are easily available online, amazon etc... a tiny amount of glue is also required to hold the base in as the entire design is compact with no room for latches.

Easy to assemble, simply follow this video -

 https://www.tiktok.com/@fillifuu/video/7388564292427156769?is_from_webapp=1&sender_device=pc&web_id=7362992772557194784

Print settings - 

print slowly for better overhangs.

No support or brim necessary unless needed due to bed adhesion problems. I do recommend supports on the bottom centre in critical regions only, this is to help improve print quality.

Detect thin walls enabled if using the first top centre (the first is only to cover the spring if you wish, but not necessary, just print the one you prefer)

Any help required and I'll be sure to help as best as I can

0.42mm wall thickness, 2 should be fine but can be increased for strength.

Have fun and thank you for all the support, I will soon be releasing my new flexi that I have been working hard on for all subscribers, I know you will love it so don't forget to like and share.

Any help required and I'll be sure to help as best as I can

Force-Feedback Clicker Spinner Fidgets

TOP CENTRE 2nd.stl

**This 3D design is for personal use only if purchased individually. To obtain the rights for commercial sale, you must join the Commercial Maker Thangs Membership.**

Add some Halloween flair to your fidget collection with this Gravestone Fidget Clicker! Designed to bring spooky, cute fun to your desk, this clicker is compatible with two types of mechanical keyboard switches, ensuring the perfect click. The gravestone design is both decorative and unique, making it a great piece for Halloween lovers. Whether you're using it to stay focused or simply as a fun accessory, this clicker is sure to be a hit. Easy to print and assemble, it’s a must-have for the Halloween season!

**Print Settings**
- No brims required
- No supports required
- 8-10% infill.
- 2-3 walls
- 0.4mm nozzle
- 0.12mm layer height for the top designs, 0.12 - 0.2mm layer height everywhere else
- Use 3MF file if you want to use your AMS for the colored top

**Items Used:**
- Kailh Jade Switch: https://amzn.to/3Y5lbE3
- Cherry Blue Switch: https://amzn.to/3NmYTJ1
- Periwinkle PLA: https://amzn.to/3A1ui0n
- White PLA: https://amzn.to/3zNzrsZ
- Pastel Banana PLA: https://amzn.to/3Ns6TbD

**Important Note: Not suitable for young children. Contains small parts that may pose a choking hazard.**

**Assembly Video:**
https://youtu.be/vLx17_Pr9XU

Halloween Gravestone Fidget Clicker - Spooky Desk Item and Compatible w/ Mechanical Keyboard Switch

pixelandpapier__tombstone_fidget__bottom.stl

**This 3D design is for personal use only if purchased individually. To obtain the rights for commercial sale, you must join the Commercial Maker Thangs Membership.**

Want to add a touch of retro Halloween fun to your desk? The Kitsch Creep Fidget Clicker is here! This design features four kitschy Halloween icons—Ghost, Mothman, Frankenstein, and Skeleton—framed in an ornate picture frame. Compatible with two types of mechanical keyboard switches, it delivers a perfectly satisfying click every time. Whether you’re looking for sensory stimulation or a way to stay focused, this clicker is bound to become your favorite decorative fidget.  Easy to print and assemble, it's the perfect addition to your fidget collection for the Halloween season!

**Print Settings**
- No brims required
- No supports required
- 8-10% infill.
- 2-3 walls
- 0.4mm nozzle
- 0.12mm layer height for the top designs, 0.12 - 0.2mm layer height everywhere else
- Use 3MF file if you want to use your AMS for the colored top

**Items Used:**
- Kailh Jade Switch: https://amzn.to/3Y5lbE3
- Cherry Blue Switch: https://amzn.to/3NmYTJ1
- Periwinkle PLA: https://amzn.to/3A1ui0n
- White PLA: https://amzn.to/3zNzrsZ
- Pastel Banana PLA: https://amzn.to/3Ns6TbD
- Gold PLA: https://amzn.to/4h7oH9p
- Black PLA: https://amzn.to/4eFXZTD
- Orange PLA: https://www.matterhackers.com/store/l/175mm-pla-filament-orange-1-kg/sk/ME4CUFC6?aff=7646
- Silver PLA: https://amzn.to/4eGHRBz
- Peach PLA: https://amzn.to/4f5Ajbp
- I used Muted Red by Polymaker, but it seems to be discontinued. This PLA looks like the closest match: https://amzn.to/4eEiq3F

**Important Note: Not suitable for young children. Contains small parts that may pose a choking hazard.**

**Assembly Video:**
https://youtu.be/mca5DW2ytFY


Halloween Fidget Clicker - Portraits of Retro Ghost, Mothman, Frankenstein, Skeleton in a frame

pixelandpapier__kitsch_creep_fidget__frame.stl

The **Momentus Mind Camera** is a breakthrough device capable of capturing vivid memories and storing them directly in your brain. The incredibly satisfying and effective clicking noise triggers a Pavlovian response that your brain will come to associate with important memories. Made possible by navigating a narrow labyrinth of legal loopholes, you can now 3D print your own! So get out there and make some memories (at your own risk)!

This is the **PRO Kit**, which includes a bunch of styles and options for your custom mind camera. Try out a basic kit [for free here](https://than.gs/m/1076063?affiliateCode=MAKE).

---

**_Printing Guidelines_**

_Watch the attached assembly video for detailed printing and assembly instructions!_

- 0.4mm nozzle, 0.16mm layer height, 3 walls, 10% infill, 5 top and bottom layers.
- All parts were designed to work with PLA, and should hold up for hundreds of snaps but a more resiliant material like PETG or ABS may increase shutter life. I would avoid softer PLA variants like silk/matte, especially for the Trigger. As always keep PLA parts out of hot environments.
- _Front_loose.stl_ part is included to compensate for imperfect prints, but it's highly suggested to use a tuned printer that works with the default parts for best operation.
- If using a softer filament or want an extra finger workout you can print the _'firm'_ and _'stiff'_ versions of the Trigger, but the standard one should work well for most cases.
- For the multicolor version of the back, make sure to use the correspondening strap type (_'noStrap','StrapA', or 'StrapB'_) for both the _face_ and _main_ STLs.

- Designed to work with my printable [Keychain Loop](https://than.gs/m/1076066?affiliateCode=MAKE) or any [standard keychain](https://amzn.to/4bGq5wJ).
- No adhesives should be necessary, but if you want to glue parts together for extra strength, I suggest [E6000](https://amzn.to/3UIOdso).

---

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Bambu Lab PLA](https://bit.ly/bamFIL).*


*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_*. 

Momentus Mind Camera PRO // Fidget Clicker + Memory Device

Multi_Front_Main.stl

**VERSION 2:** I added the version with **hidden magnets.** Set the pause at the right moment in the slicer, insert the magnets into the print, and resume printing!

***

**The simplest, most essential upgrade for your home.** Tired of searching under sofa cushions or behind the TV? **SNAP CLICK** ensures your remotes are always exactly where they belong.

***

**Quick & Easy Setup:** The system is powered by **four magnets (10mm diameter x 2mm thickness)** for a secure, satisfying snap every time.

***

**Tailor the installation to your space with two wall-mount:**

- **Screw-Mount:** Features pre-drilled holes for a rock-solid, permanent fix.

- **Adhesive-Mount:** A sleek, flat surface designed for high-strength double-sided tape. No drills, no holes, no stress.

***

**OTHER VIDEO & PHOTO**
If you want to see more videos or photos of this design follow me on my [_Instagram_](https://www.instagram.com/af_inventions) or [_TikTok_](https://www.tiktok.com/@af_inventions)!

***

_**COMMERCIAL LICENSE**
Purchasing or downloading this file does not give you the right to sell physical prints of this design.
You can obtain a commercial license for all my designs by signing up to my [_Thangs_](https://than.gs/u/3123610?plans=true)._

SNAP CLICK | MAGNETIC WALL HOLDER

SNAP CLICK - PART B - REMOTE.STL

SNAP CLICK - HIDDEN MAGNETS - PART 1A - WALL.STL

SNAP CLICK - HIDDEN MAGNETS - PART 1B - WALL.STL

SNAP CLICK - HIDDEN MAGNETS - PART 2 - REMOTE.STL

I designed this switch for a game I'm working on, and it turned out so satisfying that I made it into this compact fidget keychain. It's printed in several parts for easy customization and the internal flat spring creates an almost magnetic feel without the rare earth minerals!

Add color indicators and use it to track things, or just flick it for the fun of it.

For more extras and variations, check out the [bonus pack here](https://than.gs/m/1313223?affiliateCode=MAKE). There is also a [Big Snappy Switch](https://than.gs/m/1313210?affiliateCode=MAKE).

---

**_Printing Guidelines_**

Check out [this short](https://www.youtube.com/shorts/Nx2y7_GfCkQ) for assembly tips. Adding a tiny bit of oil and then running the print under water really does wonders for smoothness! 

The download includes standard and 'lite' versions of the spring, case front, and case back. The standard version has a stiffer snap, while the lite version is super easy to flip back and forth. You must use either OG or Lite versions for each of those files for perfect fit. You can also print the outer case with or without the loop for a keychain.

Print the 'ColorTag' twice in different colors to use as an indicator switch.

Use your standard best settings at 0.16mm layer height. 2 shells and 15% infill works well.



Snappy Switch Keychain

SnappyOG_CaseBack_Keychain.stl

This UFO-shaped Click Fidget toy is also suitable for use as a keychain.
It can reduce your stress and is ready to play with only 26 minutes (Single Color) of printing time.

I hope you like it


[Rocket Click & Gyro Fidget](https://makerworld.com/en/models/765908#profileId-701189)
(Makerworld exclusive Due to program rules, I cannot share Rocket Click & Gyro Fidget with you here.)




I would be happy if you look at the links below:
Instagram: https://www.instagram.com/a_ilterish/
Cults3D: https://cults3d.com/en/users/A_ilterish/3d-models
Printables: https://www.printables.com/@ilterish_843470/models
MakerWorld: https://makerworld.com/en/@A_ilterish
MakerOnline: https://bit.ly/Makeronline



UFO Click Fidget

UFO Fidget.stl

Have you found a model that requires clickers but don't have any?
Try our “Dummy Clicker”!
You can immediately print and assemble your favorite models! 😉
Check our [Youtube Assembly Video](https://youtu.be/utRoAGwI3Oo)!
- In the print profile you will find 2 different models: one a little softer, one harder.
- It requires a bit of glue and may be subject to printing tolerances.

Happy printing!

**Commercial License 💰**
Do you want to sell prints of our models? You can obtain commercial licensing by joining the Commercial License in our Thangs3D and unlock the opportunity to share this design with your customers!

Dummy Clicker

Dummy cliker.3mf

Discover the wonderful world of 3D printing and fidget play with this long-lasting, magnet-operated mechanism! Use it to annoy your family and friends, enforce positive behavior when training your pets, or even use it as a musical instrument!

**Update August 5, 2025:** Updated the design to prevent buttons from sticking so much.

**Required Hardware**
6x3mm magnets

**Assembly**
Harnessing the power of magnets for its operation, this fun and satisfying fidget toy features a button that creates a pleasing click sound when pressed down and released, outperforming similar items that use springs.  

The magnet holes are designed to hold the magnets with a press fit. However, depending upon your printer tuning, the use of glue may be necessary for securing the magnets, or a tool to push them into their designated holes. 

Make sure the magnets are oriented to attract each other when assembling the switch, ensuring the flawless functionality of your fidget toy. A test run is recommended before the final glue application to prevent the switch from sticking in the down position. Some sanding around the hinge of the switch might be necessary during this trial phase to guarantee smooth movement.

The finishing touch involves placing a dab of glue inside the remaining smaller holes, creating a stable base by holding the Case Lid onto the Case until it cures. 

The result is a robust, irresistible fidget toy, unique in its magnetic attraction feature, suitable both as a practical stress-reliever and an engaging addition to your collection of 3D printed toys and games. From the creative mind of 'Bearded Printer,' this 3D model is not only a downloadable object but also visual confirmation of the infinite realm of possibilities provided by 3D printing.

Feel free to join [my discord](https://discord.gg/uqJwERhbxf) for additional support, questions, or suggestions!

Fidget Clicker

Fidget Switch.stl

Button_1_Stop.stl

Fidget Button.3mf

Hi everyone!
After the **Dummy Clicker**… we've designed this "clicker to keychain" adapter to allow printing of our models for those who prefer not to use or are waiting for clickers to arrive. This design is an extremely **simple** and **fast-printing** model, and it requires a drop of glue ([Amazon link](https://amzn.to/40YUlQu)) to attach it to the model. It's available in **two versions** (tall and short) to better fit different models.

**Commercial License 💰**
Do you want to sell prints of our models? You can obtain commercial licensing by joining the Commercial License in our **Thangs3D** and **unlock** the opportunity to share our design with your **customers**!

CLICK

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Clips

SNAP CLICK | MAGNETIC WALL HOLDER

Snappy Switch Keychain

UFO Click Fidget

Dummy Clicker

Fidget Clicker

Clicker to Keychain Converter, Dummy Adapter! DIY

SNAP CLICK | MAGNETIC WALL HOLDER

Snappy Switch Keychain

UFO Click Fidget

Dummy Clicker

Fidget Clicker

Clicker to Keychain Converter, Dummy Adapter! DIY

GEN2 270-3W-1H Classic Drawer

GEN2 115 Classic Drawers

GEN2 Decor - Faceplate - EdgeLabel Intro Edition

Pumpkin Twisty Fidget

Valentine's Day Fidget Clicker - Portraits of Retro Cupid and Devil in a frame

Momentus Mind Camera Basic // Fidget Clicker + Memory Device

Force-Feedback Clicker Spinner Fidgets

Halloween Gravestone Fidget Clicker - Spooky Desk Item and Compatible w/ Mechanical Keyboard Switch