Christmas Kitty Ornament

Christmas Kitty v2.stl

Grumpy snowman

Grumpy snowman.stl

Crochet Christmas Tree 2

Crochet Christmas Tree 2.stl

Origami Inspired Tree Ornament #4

Origami Inspired Tree Ornament #4.stl

Darth Vader Christmas Tree Decoration Upgraded

This is an upgraded version of [Darth Vader Christmas Tree Decoration](https://thangs.com/designer/frikarte3D/3d-model/Darth%20Vader%20Christmas%20Tree%20Decoration-547322?manualModelView=true). It's a diferent concept of the Darth Vader Mask.
It's designed to be printed in different color changes to achieve the final result, if you want you can print it in one color and paint later.
This is the filament color change configuration if you print with 0.2mm layer using Cura "Pause at Height":
0 to layer 13 (0 to 2.6mm) = White
14 to 17 (2.8 to 3.4mm) = Black
18 to 21 (3.6 to 4.2mm) = Red

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

ADVENT LED TEALIGHT CASTLE / WITH SCREW CAP / CHRISTMAS DECOR / CHRISTMAS GIFT

CHRISTMAS_CASTLE_LED-TEALIGHT.stl

Present Ball Holiday Themed Opening Pokeball - Fan Art

Present Ball Complete.stl

Standing Penguin Pencil Holder

standing_penguin_multicolor.stl

Ornament fidget spinner

Ornament spinner.stl

Christmas Decoration Style 3

Decoration Style 3 Type 1_STL.stl

Mini Dragon 01 (Christmas Edition)

Printzee_MiniDragon(Christmas).3mf

Mistletoe - Cookie Cutter with Stamp

Mistletoe - Cookie Cutter.stl

Gyro Tree - Peek a Meow

catinchristmastree.stl

Christmas Tealight Ornament 2

Orn Body.3mf

Candle Holders Set

Gracewindale-candle-holder-narrow-2cm.stl

Flexi Krampus

FlexiKrampus_Keychain_02.stl

XL Girl Elf

Xl elf girl .3mf

Christmas Decoration Style 4

Decoration Style 4 Type 1_STL.stl

Yeah, Another christmas Ball

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**ABOUT THE DESIGN**
Yep, this is yet another variation on my Christmas Balls with Integrated Stems. You can't keep a good designer down. There's no photo because my prototype is still printing. Still, it's 80% done and the rest is identical to other prints I;'ve published, so I already know it should work. Give it a try. It's relatively easy to print. 

**RESIZING**
This ornament should scale up well, but I'm not sure how much smaller you could print it using a consumer FDM printer. Using a resin printer, you could probably print it much smaller.

**PRINT TIME**
About 6 hours

**PRINT SETTINGS**
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 – 0.8 mm.

I had the best results using Cura setting the default width to 0.4 mm and adding custom settings for the main ball that printed it 0.8 mm thick. You can do this by adding a support blocker to the bottom and giving it custom settings of 0.4 mm. Cura adds the two and prints the area within the blocker at 0.8 mm.

*Infill*
These do not need any infill. JUST DON'T DO IT.

*Speed*
* Outer Wall: 35 mm/sec
* Inner Wall: 40 mm/sec
* Travel SpeeD: 60 mm/sec

*Build Plate Adhesion*
I used a brim. With the supports, you shouldn't need a raft.

*Supports*
You will probably need supports for both bed adhesion and the overhang on the first few layers. You shouldn't need supports for the loop at the top. Adding them would just increase the chances the supports broke and caused the print to fail. If you get supports inside the ball, just add a support blocker.

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 60 Degrees

Flexi Xmas Dragon – Toy • Keychain • Magnet, Articulated Christmas Toy

Xmas dragon_ANYCUBIC.3mf

CHRISTMAS

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Christmas Kitty Ornament

Grumpy snowman

Crochet Christmas Tree 2

Origami Inspired Tree Ornament #4

Darth Vader Christmas Tree Decoration Upgraded

ADVENT LED TEALIGHT CASTLE / WITH SCREW CAP / CHRISTMAS DECOR / CHRISTMAS GIFT

Present Ball Holiday Themed Opening Pokeball - Fan Art

Standing Penguin Pencil Holder

Ornament fidget spinner

Christmas Decoration Style 3

Mini Dragon 01 (Christmas Edition)

Mistletoe - Cookie Cutter with Stamp

Gyro Tree - Peek a Meow

Christmas Tealight Ornament 2

Candle Holders Set

Flexi Krampus

XL Girl Elf

Christmas Decoration Style 4

Yeah, Another christmas Ball

Flexi Xmas Dragon – Toy • Keychain • Magnet, Articulated Christmas Toy