Skull Puzzle

Skull Puzzle Piece 5.stl

Cup of Teeth - Saucer

Dual Colour Teeth Saucer - Teeth.stl

Cup of Teeth - Teacup

Dual Colour Teeth Cup - Teeth.stl

Dragon Skull - Open Jaw - Decoration

Cross Bones Keychain .3mf

Cross Bones Keychain.stl

Short Bony Basilisk - Articulated Snap-Flex Fidget (Tight Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Emerging from the crypts and cursed castles, the Bony Basilisk is here to bewitch and bedazzle just in time for the spooky season! With its detailed skeletal structure, this bony behemoth is prepared to perch on your shelf as the haunting highlight of your Halloween assembly or stand sentinel, casting a bone-chilling shadow for your guests.  This ancient creature refuses to let the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Bony Basilisk to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Bony Basilisk is the third creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Tight** tolerance model.  For the other tolerances, please check out the other versions of the model below:

Medium Tolerance Short Bony Basilisk: 
Coming Soon
Loose Tolerance Short Bony Basilisk: 
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Short Bony Basilisk, be sure to check out it’s more mature, older sibling, the :ong Bony Basilisk:

Tight Tolerance Long Bony Basilisk: 
https://than.gs/m/936921
Medium Tolerance Long Bony Basilisk: Coming Soon
Loose Tolerance Long Bony Basilisk: 
Coming Soon

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Voronoi Vertebrae (lumbar)

L5.stl

Voronoi Vertebrae (thoracic)

T12.stl

Voronoi Vertebrae (cervical)

C7.stl

skull.stl

As anatomically correct as I could while still keeping it simple for Halloween design. 

CoD_MWII_Ghost_Mask

Remixed a model from [Serhero ](https://www.thingiverse.com/serhero/designs) on thingiverse. 
Smoothed edges, reworked reliefs, add some extra bulk around the eyes for support when actually wearing it.
Ask if you have any specific questions on parameters or design changes!

Printed it vertically on a Longer LK5 Pro
Specs:
- PEI steel bed at 65C, nozzle 207C
Initial layer 65/210C respectively.
- Layer Height 0.15
- 10% infill / Gyroid
- Speed 60 / infill 65 / outer wall 35 / inner wall 40
- Travel speed 180
- Tree supports everywhere
- 8mm Brim (needed for supports to stick)

- Wall Line Count = 3
- Outside to Inside walls
- Z Seam Align = Sharpest Corner/Smart Hiding
- 5 top/bottom layers/Lines/0.75 thickness
- 

Malunion radial 30 degree coronal.stl

This is a model of a forearm malunion for research created by David Bennett MD. This is a pathology model for use in orthopaedic clinic The CAD designed by David Bennett for teaching. Use cases suggested:  implant design, testing, resident or medical student teaching, biomech testing, digital surgery simulators, AR and VR enviornments, pathology and anatomy labs, radiology courses, training, CME, MOC, practical exams, biology class, and innovation. 

Key words

anatomy, pathology, orthopedics, surgery, David Bennett, medical, orthopaedics, deformity, implants, osteology, radiology, CT scan, resident, radiologist, orthopedic surgery, fracture surgery, orthopaedic surgery, orthopaedic implants, implant design, innovation fracture, retractor, malunion, nonunion, angulation, remodleing, radius, ulna, radius and ulna, diaphyseal, bone, osteology

Bird Skull

A chicken skull I sculpted in VR. It was a practice sculpt, but turned out alright, so why not share! Good practice for using supports :P

Sleeping Cubone

Sleeping Cubone Painted.3mf

Wire Skull // Deer

DeerSkull-full.stl

Teegarden Vase

A unique home décor piece collected from a recent trip to a nearby exoplanet. I think it is the husk of an alien plant species. If interstellar space travel is not an option for you, you could 3D print it.

See here for video: https://youtu.be/GhgLM8f0nVY 

Model shown is printed in Sovol PLA Silk Magic “Green & Purple & Copper.”


Skull Lamp

Hey,
I'm glad you found my Skull Lamp.

You can stick any lamp in there, and it will glow in the color of the light, although these are the parts I used:

EU Plug:
https://ebay.us/PRcPvm

US Plug:
https://ebay.us/hBRN1i

You support me by suing these Links! :D

Enhance the ambiance with the perfect bulb:

EU:
https://ebay.us/yB4Acp

US:
https://ebay.us/oTWuS1

You support me by suing these Links! :D

Print Settings:
Print with Supports, ideally tree supports.

That's it Enjoy your Skull Lamp. If you find joy in this creation, please consider supporting my work by buying me a coffee at https://www.buymeacoffee.com/Ri0m0. Every contribution helps me continue my filament-fueled endeavors.

Check out my profile for more lamp designs, or stay tuned for upcoming releases. 

Please keep in mind that this design is intended for non-commercial use only.

Cracked Skull

Skull.stl

Alien head pencil topper

Demon Skull - Decoration

Demon Skull - Decoration
If you like my work find more here - https://www.myminifactory.com/users/printedobsession
if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession
want to know more about my process? i have tutorials on youtube - https://www.youtube.com/c/PrintedObsession

CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.


Bone

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Skull Puzzle

Cup of Teeth - Saucer

Cup of Teeth - Teacup

Dragon Skull - Open Jaw - Decoration

View 16 new models

Short Bony Basilisk - Articulated Snap-Flex Fidget (Tight Joints)

Voronoi Vertebrae (lumbar)

Voronoi Vertebrae (thoracic)

Voronoi Vertebrae (cervical)

skull.stl

CoD_MWII_Ghost_Mask

View 27 new models

View 111 new models

Sleeping Cubone

View 72 new models

Teegarden Vase

View 11 new models

Cracked Skull

View 16 new models

Demon Skull - Decoration