Fishbone Bookmark/Paperclip

Fishclip_Thick.stl

Ancient Skull Brush & Pen Holder | Gothic Desk Organizer | Anatomical Skull 3D Print

Ancient Skull Brush Holder.stl

Wire Skull // Deer

DeerSkull-full.stl

Tooth Dish

Need a place to display all those cavity-causing sweets? This whimsical Tooth Dish sculpture was made from the teeth of the person who had “just one more.” 

Clean it with your usual dental hygiene products.

See here for video: https://youtu.be/t_a1VW46E3E 


SKELETON HAND HORNS ROCK AND ROLL

skeleton_hand horns.stl

Vertebrae with Secret Compartments

Vertebrae with Compartments Display Only Do Not Print.stl

Lattice Skull Wire Tangle

This model is part of a series of Lattice Skulls designed for resin printing. Each model features a different complex lattice structure.

See here for videos:

Square and Diamond: https://youtu.be/2ApAvu3hb6U
Wire Weave and Tangle: https://youtu.be/bzIrmCZ9WpE 

Download 3D files:
Square: https://than.gs/m/948742 
Diamond: https://than.gs/m/948745 
Wire Weave: https://than.gs/m/948893 
Wire Tangle:

These models require an intermediate to advanced experience level to set up and print. 

The models with very thin structures use very little material to print but are delicate and require extra care when printing and processing.

To print, rotate the model 180 degrees upside down so that the top of the skull is oriented to the build plate. The skull is tilted slightly forward to reduce the need for internal supports. If you maintain the forward tilt of the skull you will only need to generate support to the top of the head. The rest of the model will print without the need for supports inside of the skull.


Lattice Skull Wire Weave

This model is part of a series of Lattice Skulls designed for resin printing. Each model features a different complex lattice structure.

See here for videos:

Square and Diamond: https://youtu.be/2ApAvu3hb6U
Wire Weave and Tangle: https://youtu.be/bzIrmCZ9WpE 

Download 3D files:
Square: https://than.gs/m/948742 
Diamond: https://than.gs/m/948745 
Wire Weave:
Wire Tangle:

These models require an intermediate to advanced experience level to set up and print. 

The models with very thin structures use very little material to print but are delicate and require extra care when printing and processing.

To print, rotate the model 180 degrees upside down so that the top of the skull is oriented to the build plate. The skull is tilted slightly forward to reduce the need for internal supports. If you maintain the forward tilt of the skull you will only need to generate support to the top of the head. The rest of the model will print without the need for supports inside of the skull.


The Reclaimed Skull Planter

The Reclaimed Skull Planter.stl

Real Skull.3mf

Skull Bulb (Solid)

Skull Bulb Solid Display only do not print.stl

Architected Skull (Gyroid)

This skull is part of a series that demonstrates three of the architecting features in nTopology software.

See here for video: https://youtu.be/ZX4rk4VM46U 

In this series, the Gyroid Triply Periodic Minimal Surface, Face Centered Cubic Lattice and Hexagonal Honeycomb unit cells have been applied to a conformal cell map derived from the outer surface of the skull. Using this technique allows the structures to follow the bone contours and converge on the front and back of the skull.

See here for other models in the series:


Skull Ketchup Cap

Setting aside the obvious food safety issues here, you should definitely print one for your next Halloween party!

You'll regret watching the video, but here it is: https://youtu.be/dgwsM9Ma6t0 

The threads are sized for a standard Heinz ketchup bottle.

So gross. In so many ways.


Teegarden Vase

A unique home décor piece collected from a recent trip to a nearby exoplanet. I think it is the husk of an alien plant species. If interstellar space travel is not an option for you, you could 3D print it.

See here for video: https://youtu.be/GhgLM8f0nVY 

Model shown is printed in Sovol PLA Silk Magic “Green & Purple & Copper.”


SKELETON HAND PEACE SIGN

peace skeleton hand round.stl

Skull of the demon snail planter.stl

The Dreamcatcher of the Forgotten

The Forgotten Dreamcatcher.3mf

Enchanted Cauldron

Enchanted_Cauldron-Pot.stl

CoD_MWII_Ghost_Mask

Remixed a model from [Serhero ](https://www.thingiverse.com/serhero/designs) on thingiverse. 
Smoothed edges, reworked reliefs, add some extra bulk around the eyes for support when actually wearing it.
Ask if you have any specific questions on parameters or design changes!

Printed it vertically on a Longer LK5 Pro
Specs:
- PEI steel bed at 65C, nozzle 207C
Initial layer 65/210C respectively.
- Layer Height 0.15
- 10% infill / Gyroid
- Speed 60 / infill 65 / outer wall 35 / inner wall 40
- Travel speed 180
- Tree supports everywhere
- 8mm Brim (needed for supports to stick)

- Wall Line Count = 3
- Outside to Inside walls
- Z Seam Align = Sharpest Corner/Smart Hiding
- 5 top/bottom layers/Lines/0.75 thickness
- 

Custom Embossed Spine

THANGS3D.stl

Bone

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Fishbone Bookmark/Paperclip

Ancient Skull Brush & Pen Holder | Gothic Desk Organizer | Anatomical Skull 3D Print

Wire Skull // Deer

Tooth Dish

SKELETON HAND HORNS ROCK AND ROLL

Vertebrae with Secret Compartments

Lattice Skull Wire Tangle

Lattice Skull Wire Weave

The Reclaimed Skull Planter

Real Skull.3mf

Skull Bulb (Solid)

Architected Skull (Gyroid)

Skull Ketchup Cap

Teegarden Vase

SKELETON HAND PEACE SIGN

Skull of the demon snail planter.stl

The Dreamcatcher of the Forgotten

Enchanted Cauldron

CoD_MWII_Ghost_Mask

Custom Embossed Spine