Just what you need for a little game of b-ball!

See here for video: https://youtu.be/sNO8MSMIYjA

Files for this basketball and hoop set are provided for standard and multicolour printing. Print all files as oriented, no supports needed. 

The backboard has holes for hooks or magnets (1/4”x1/8” or 6mmx3mm neodymium). The line on the backboard is raised slightly in the standard print version to allow for a filament swap to make the line a different colour.

The halves of the balls are designed to be tight the first few times they snap together. To make them easier to snap together and apart simply file off a bit of the contact surfaces. For single colour prints you can colour the seam with a marker.

Download the full set:
Basketball: https://than.gs/m/833255 
Hoop: https://than.gs/m/833259 
Backboard: https://than.gs/m/833268 

Model in picture was printed on a Snapmaker J1 in white and orange.



Basket Smalls (Backboard)

Standard Print Backboard.stl

Basket Smalls (Hoop)

Standard Print Rim and Net.stl

Basket Smalls (Basketball)

Display only do not print.stl

Are they eggs? Or balls? Doesn’t really matter. They can hold chocolate.

See here for video: https://youtu.be/CviiN9vELjQ 

Files are provided in “snug” and “loose” versions. The “loose” versions slip together easily and can be opened by little fingers. The “snug” versions stay in place better but require as bit more force to open. 

The best way to print these is as oriented, with the model raised off the build plate 3mm and tree supports underneath. You will likely need to smooth the surfaces. If they are too tight, snapping them together and apart a few times will loosen it up.

Colour the lines with a marker or oil-based paint pen.

Download the full set:
Basketball: https://thangs.com/mythangs/file/796742 
Tennis Ball: https://thangs.com/mythangs/file/796748 
Baseball: https://thangs.com/mythangs/file/796753 



Eggball (Basketball)

Basketball Egg Display only do not print.stl

The RoboBaller is a fully printable mechanical variation of the robotic basketball sculpture I designed for the youtube video linked below.  The arm mimics that of an actual basketball shot using a unique linkage design paired with a compound gear train. The files include the STLs for the shooting arm as well as the basketball net. Print one or many and throw down a game of horse, or see if you can make some trick shots!

The video below shows how easily this mechanism can be assembled!

**The STL File:**
Prints on all standard 3d printers without supports, and doesn't require any additional parts to be assembled.  

Designed for these balls: https://amzn.to/43Qb5c3
But there is a secondary scoop option so it can shoot standard ping pong balls.

Recommended print settings:

Layer Height: 0.2mm
Nozzle: 0.4mm
Infill: 15-18% 

Total Filament Required: ~400g

Minimum Build Plate Required: 185mmx185mm

**All the files have been pre-oriented to save you some set up time! All you need to do is drop the parts into your slicer and hit print!

The Robo Baller

Build 1 (Base Parts) - 90g.stl

This two-pieced textured basketball design can be printed plain, with the company logos provided, or remixed with your own logos or brands!

See here for video: https://youtu.be/hCh1PuwPjb8 
 
The branded models shown and included for download are a “thank you” to two companies that provide a huge amount of support for my design and printing projects! Thank you https://thangs.com/ and https://snapmaker.com/ !

Files for this basketball design are provided in standard (combined) and multicolour printing format. Print all files as oriented, no supports needed. 

The halves of the balls are designed to be tight the first few times they snap together. To make them easier to snap together and apart simply file off a bit of the contact surfaces. For single colour prints you can colour the seam with a marker.

See here for smaller sized “Basket Smalls”:
Basketball: https://than.gs/m/833255 
Hoop: https://than.gs/m/833259 
Backboard: https://than.gs/m/833268 

Model in picture was printed on a Snapmaker J1 in black and orange.


Basket Brands

Plain Seam and Surfaces Combined.stl

Get ready for March Madness with this basketball design! Great for fridge magnets and other accessories!

Like these? Check out [my other March Magnets models!](https://thangs.com/search/%22march%20magnets%22%20creator%3A%22karenchaudesigns%22?scope=thangs&view=compact-grid)

---

Add magnets to your 3D prints!

**Shop supplies on Amazon:**
- [Magnets with adhesive](https://amzn.to/49TaubS)
- [Magnets](https://amzn.to/3Pw5kLD) & [Glue](https://amzn.to/3KezErc)

As an Amazon Associate I earn from qualifying purchases at no additional cost to you -- thanks for your support!

---

Likes appreciated :)

Enjoy!
💖Karen

Connect with me!
[Linktree](https://linktr.ee/karenchaudesigns)


BasketBall

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Basket Smalls (Backboard)

Eggball (Basketball)

The Robo Baller

Basket Brands