Due to the success of my Mounted Trash Bin, I've created this standalone version. It's a large trashcan that prints in several parts optimized for 3D printing, with plenty of variations and optional additions for total customization!

---

_**Printing & Assembly**_

Due to the optimized design, you can print most of these parts using default print settings. Nearly all the parts print without supports, but the new Locking Inner Rim requires support generation for a long bridge to allow for the improved lid flap.

Here is a description of the various parts:

- **Lid_Locking** : The lid of the trashcan, which snaps into place when fully opened for one handed operation. Print with 4 shells/perimeters for a hinge longevity.
- **Top_Rim_Inner_Locking** : Snap the Lid into this part. _Enable Supports!_
- **Top_Rim_Inner_Locking_Loose** _(optional)_ : A looser version of the Inner Rim, useful for thicker trashbags or less precise printing. _Enable Supports!_
- **Top_Rim_Outer** : This is the part you wrap the top of your trash bag around, which is then sandwiched into place with the Inner Rim. _There is an oval notch on the front of both the Inner and Outer Rim. Make sure they're oriented the same way!_
- **Lid_OG** _(optional)_ : The original version of the lid, without a flap on the front, and doesn't lock in the open position
- **Top_Rim_Inner_OG** _(optional)_ : Only use with Lid_OG
- **Corner_Post** : The four vertical posts that connect the Top and Bottom Rims. I would suggest 4+ perimeters/shells for strength. Print 4. Align with the channels on the Bottom_Rim and snap all 4 into place. Then set the Top_Rim_Outer onto the four posts and press each corner straight down to snap into place.
- **Bottom_Tray** _(optional)_ : This tray rests inside the Bottom_Rim to support the bottom of the trash bag. Useful if you're throwing away heavy things that might rip the bag if unsupported.
- **Bottom_Tray_Deep** _(optional)_ : Another version of the bottom tray with higher walls. Usefull if you are tossing things that might leak.
- **Foot_TPU** _(optional)_ : Small feet to be printed with TPU or another flexible filament. These are simply glued to the corners of the bottom of the Outer_Rim to add a cushion between bin and floor, for protection and non-slip.
- **Walls_Plain** _(optional)_ : Conceal the trash bag and keep it from bulging out if it's larger than the bin. Print in vase mode with 0.6mm extrusion width and 0 top/bottom solid layers. 
- **Walls_Fluted** _(optional) : Same as Walls_Plain but with a fluted texture that adds a bit of strength and decorative appearance. More likely to warp from filament shrinkage while printing!

---

Yes, it's a lot of parts, but the result is a nice, large, super functional trashcan that you can customize to your needs! Leave a comment if you have any questions or requests and I'll respond ASAP!

- **Nov 2, 2025 Update** : Added an 'ExtraFlex' version of the Corner Posts, which makes it easier to take apart and put together over and over.

---


Photographed model was printing with various PLA filaments on the [Qidi Plus4](https://qidi3d.com/products/plus4-3d-printer?sca_ref=6089281.BQS8d0sJuF) (Also [on Amazon](https://amzn.to/4jON7VK))

Wireframe Wastebin // Standalone Trashcan

Lid_Locking.stl

Corner_Post(4)_ExtraFlex.stl

When I saw the Strong TPU Strap by Turbopstros (https://www.printables.com/model/1451354-strong-tpu-strap-parametric), I had a vision. That's where this bag comes in. I created my version of the TPU strap which is in this file. 
Join me in creating a stunning, unique tote bag with this 3D-printed kit! This project combines 60 PLA flat rings with flexible TPU straps and a sturdy 3D-printed bag base to form a chic, interwoven design. The final product is a durable and stylish bag, perfect for carrying your essentials. If you choose, you can add a lined pouch for added privacy.

This design is a great way to blend 3D printing with crafting, using simple leather rivets to hold the beautiful braided structure in place.

Assembly Instructions (Braiding and Riveting)
Materials Needed:

60 x PLA Flat Rings (Included in file)
1 x Bag Base (Included in file) printed with fuzzy skin
TPU Strips (Print 4 of the included TPU strip file)
2 pieces @ 43" (Handle Strips)
5 pieces @ 25.5" (Horizontal Body Strips)
8 pieces @ 13" (Vertical Body Strips)
34 pairs of 6mm leather rivets

Tools: Hole punch, scissors, and rivet pliers (recommended for easier access).

Detailed Video Instruction: For a step-by-step visual guide, please check out the linked video instruction on my YouTube channel

Assembly Steps:

Prepare the Strips: Cut the 4 printed TPU strips into the lengths specified above for the handles, horizontal body, and vertical body strips.

Attach Handles and Vertical Strips to Base: Slide the 2 handles and the 8 13-inch strips into the slots around the bag base. Punch holes and attach these strips evenly around the perimeter of the bag base using a total of 24 leather rivets (12 pairs). Ensure the strips are secured.

Start the Braiding (Horizontal): See video.  After each round, you'll need to connect the 25.5 inch strip with a pair of rivet. 8 pairs on each side of the bag. 

Weave and Secure the Rings: Continue adding the PLA rings and weaving the horizontal strips, working your way up the bag. The rings should be held in place by the tension of the interwoven strips.

Secure Horizontal Strips: Once the main body is woven, secure the ends of the five horizontal strips to a vertical strip or the bag base using the remaining 12 leather rivets. The weaving action itself is the primary mechanism holding the bag together.

Interwoven Rings and Strap Tote Bag

straps and circle bag.3mf

**Edit (8/1): If your printer isn’t perfectly calibrated and the hinges fuse together, try the file ending in '__loose.stl' as it adds extra clearance to prevent welding.

Edit 7/31: I missed coloring one of the stars in the quilted heart top. I’ve fixed it, so please go ahead and redownload the updated file!**

This 90s Heart Compact pays tribute to all your favorite ’90s girl accessories, from digital pets to magical girl keepsakes. Use it as a keychain or carry it solo, and choose from 2 base styles and 4 tops. I’ve also included the SVG files so you can design and swap in your own inserts. It’s a mirror, a pocket organizer, and a dose of nostalgia all in one!

**Requires an AMS printer for the multi-color effect. I’ll add compatibility for non-AMS printers in the future.**

**Important Note: Not suitable for young children. Contains small parts that may pose a choking hazard.**

**Print Settings**
- No brim required
- No supports needed
- 15% infill
- 2-3 walls
- 0.4mm nozzle
- 0.2mm layer height

**Items Used:**
- White: https://amzn.to/3CbNBFa
- Pink: https://amzn.to/3CbNBFa
- Jelly Red: https://amzn.to/4jlO34i
- Gold: https://amzn.to/4iL3W3W
- Black: https://amzn.to/3XuNUT5
- Ball Beads Chain: https://amzn.to/4lXF6zm

**Assembly Video:**
https://youtu.be/EAOOQ4z_jt4

90s Heart Compact Mirror Keychain: Magical Girl Accessory, Pocket Organizer, Keychain, Nostalgia 

pixelandpapier__90s_heart_locket__quilted_heart_base_keychain.stl

pixelandpapier__90s_heart_locket__quilted_heart_base_NO_keychain_looser_version.stl

pixelandpapier__90s_heart_locket__quilted_heart_base_keychain_looser_version.stl

pixelandpapier__90s_heart_locket__heart_base_NO_keychain_looser_version.stl

pixelandpapier__90s_heart_locket__heart_base_keychain__looser_version.stl

This collection features some adorable little accessories at 1:12 scale that add a touch of magic to any scene. Inside, you’ll find a miniature cake, a retro lava lamp, and a tiny photo frame. Perfect for dollhouses, dioramas, or book nooks!

Not really into miniatures? No worries! These pieces also make super cute keychains or bag charms, giving you a fun way to express your style wherever you go. They’re small, but packed with personality, and guaranteed to bring a little joy to your everyday. I also used models from the Tea Set from the Flower Power Mini Suitcase (https://than.gs/m/1303506) and the Lip Balm Holder (https://than.gs/m/1274605) designs to complete this mini charm collection.

**Print Settings:**
If you'd like to see the orientation and settings of the print, please take a look at the .3mf file.

_Mini Cake:_
- Suggest a brim
- No supports needed
- 15% infill
- 2-3 walls
- 0.4mm nozzle
- 0.08mm (extra fine) layer height

_Mini Lava Lamp (Glass Enclosure):_
- Suggest a brim
- No supports needed
- 100% infill
- 2-3 walls
- 0.4mm nozzle
- 0.28mm (extra draft) layer height
- Slow down the outer wall, inner wall, sparse infill, internal infill, top sirface to 100mm/s (I recommend using the settings from the provided .3mf file. These settings will help achieve a more transparent look)

_Mini Lava Lamp (Excluding Glass Enclosure):_
- Suggest a brim
- No supports needed
- 15% infill
- 2-3 walls
- 0.4mm nozzle
- 0.12mm layer height

_Mini Photo Frame:_
- Suggest a brim
- No supports needed
- 15% infill
- 2-3 walls
- 0.2 to 0.4 mm nozzle
- 0.06 mm to 0.08mm layer height

**PLA Used:**
- White: https://amzn.to/3FORvWl or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-wht
- Butter Yellow: https://amzn.to/4jAvsBl or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-mat-bylw
- Metallic Finish Brown: https://amzn.to/3XJFnMi or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-shny-brn
- Wood: https://amzn.to/4i6uYla or https://www.hatchbox3d.com/products/3d-wood-1kg1-75
- Jelly Red: https://amzn.to/4jlO34i or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-jred
- Blush Pink: https://amzn.to/4lEBnad or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-mat-blpnk
- Vivid Tangerine: https://amzn.to/42Towtk or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-mat-vtan

**Additional Items:**
- Lobster Claw: https://amzn.to/4lP5Kec
- Key Ring: https://amzn.to/3S51mKe
- Paperclip Chain and Jump Rings: https://amzn.to/4lIkwTS 

**Assembly Video:** https://youtu.be/dYZe-hB4U5A

**Important Note: Not suitable for young children. Contains small parts that may pose a choking hazard.**



Miniature Accessories Set – Charms for Keychains and Bag Charm, Mini Cake, Lava Lamp, Photo Frame

pixelandpapier__mini_lava_lamp__glass_enclosure.stl

I made these mounted trash bag bins specifically for the Red/Green waste bags used in my region of Sweden, but you may find them useful for your own situations as well! I have mine mounted on the cabinet drawer under my kitchen sink for super convenient and accessible composting.

The design consists of four parts:
- A lid
- An inner rim that connects to the lid
- An outer rim that holds the trash bag and snaps onto the wall mount
- A beefy wall mount that securely clips onto the rim.

Default print settings should work out. I used PC filament to make the mount extremely resiliant but I suspect most filaments should be sufficient. The rest of my parts were printed with PLA. Share your results if you try something else!

The mount has holes for up to 6 wood screws, but I only used the top 4 and it's enough, even with short 19mm screws. The holes are sized for threads up to 4mm wide, but you should be able to expand the holes by pre-drilling if necessary.

**_July 18, 2025 Updates_**
- The lid and inner rim used to be a single print in place part, but this has proven to be unecessary. The parts are now split and you can flex the inner rim to snap the lid onto the hinge.
- Added a new **locking** lid! This upgraded lid snaps into the open position to stay up on its own.
- Looser version of the locking lid is also included. Useful for thicker trashbags or less precise printers.
- **note:** You **must** use the Locking Inner Rim together with the Locking Lid.
- **note:** The new Locking Inner rim requires **support material** generation turned on! It's a small amount of supports, but this enables the flap on the lid for easier handling.

--- 

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Bambu Lab Bambu Green PLA, Red PETG, and Clear PC filaments](https://bit.ly/bamFIL).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_


Bag

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Wireframe Wastebin // Standalone Trashcan

Interwoven Rings and Strap Tote Bag

90s Heart Compact Mirror Keychain: Magical Girl Accessory, Pocket Organizer, Keychain, Nostalgia

Miniature Accessories Set – Charms for Keychains and Bag Charm, Mini Cake, Lava Lamp, Photo Frame

Mounted Trash Bag Bin (Updated)