Bulletin board

board_nails_tape.stl

Tic Tac Toe: The Board Game

Base.stl

EZPZ Pegboard Hook // 5mm Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 5mm depth. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Flush Cutter, Pliers, Clippers Holder // Peg Anything

If you own a 3D printer, you probably have a pair of these blue clippers lying around. Instead of searching around for them all the time, how about hanging them up on a pegboard so you'll always know where they are!

Super quick print. No supports required. Print solid.

EZPZ Pegboard Hook // 10mm Reinforced Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 10mm depth and a reinforcing strut along the bottom, which takes up a bit more space in exchange for greater strength. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Pegboard Hook // 15mm Reinforced Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 15mm depth and a reinforcing strut along the bottom, which takes up a bit more space in exchange for greater strength. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Auxetic Chess Print in Place by Ruven Bals

Auxetic Chess by Ruven Bals.3mf

Chessboard foldable with storage

imprAchessboard.3mf

Peg Anything // Caliper Holder

Easily pop this part onto any standard pegboard with 1" spacing and .25" holes. Bam, instant organization!

Model has built in support material. For best results print at .2mm layer height.

The specific 6" calipers I designed this around are no longer for sale, but it should work well for many other electronic calipers that have near identical designs.

Small Hook // Peg Anything

A little hook I made to hang my rulers, but it'll work great for lots of things. Very quick print. Print solid. Give it a try and share how you used it!

Made for standard pegboards with 1/4" holes.

Pegboard Anything // Just the Pegs (Fusion 360 link in description)

hard-peg.stl

Overengineered Portable Chess Board

Chess Board Dove Tail-Chess Board Male.step

Chess Set

Chess Pieces Plated Painted.3mf

 Rebreakable Karate Board

karate board 10mm.stl

Peg Anything // Tough Large Hook

l-hook-sturdy.stl

Punk'N Pil'N - Fun Halloween Stacking and Balance Game for all Ages - Stack your Jack-O-Lanterns!

BOARD

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Bulletin board

Tic Tac Toe: The Board Game

EZPZ Pegboard Hook // 5mm Hook

Flush Cutter, Pliers, Clippers Holder // Peg Anything

EZPZ Pegboard Hook // 10mm Reinforced Hook

EZPZ Pegboard Hook // 15mm Reinforced Hook

Auxetic Chess Print in Place by Ruven Bals

Chessboard foldable with storage

Peg Anything // Caliper Holder

Small Hook // Peg Anything

Pegboard Anything // Just the Pegs (Fusion 360 link in description)

Overengineered Portable Chess Board

Chess Set

Rebreakable Karate Board

Peg Anything // Tough Large Hook

Punk'N Pil'N - Fun Halloween Stacking and Balance Game for all Ages - Stack your Jack-O-Lanterns!

Tic-Tac-Stack Farm Animals Board Game / 3MF Included

Cable Hooks // Peg Anything

4 In A Row Hearts

Clue Weapon Set