This roll bar is a direct replacement for the one used on the Tamiya Blackfoot. Two variations are in this download; one with 4 holes for light mounts and one with no light mounts. 

Please see the video before purchase. 


Tamiya Blackfoot Ford F150 Roll Bar, two Versions

058025-01_0-1_roll_bar.stl

I'll show you how to build your own mesmerising table top coasters. A practicable and fun arts project for all ages and abilities. 

Laser Cut or 3D Print these amazing and customisable coasters. 

Etsy Store Kits with or without pre-cut wood: https://diymachines.etsy.com/listing/1693030560 

 -- Creality Falcon 2 22w Laser Cutter & Engraver: –  https://geni.us/CrealityFalcon2-22w 

 ------------------------- 

List of items used in this project and where to find them:

3mm Sheet Plywood or similar https://geni.us/3mmPlywood
AA Battery Holders (x2) https://geni.us/AABatteryPCBMount
Small Geared DC Motor (x1) https://geni.us/MiniGearedDCMotor
Super glue https://geni.us/SuperGlueLongNeck
Tiny magnets 3x3mm (4 for the base, 8x per coaster) https://geni.us/3x3mmMagnet
Batteries https://geni.us/AABatteries ■ Reed switches - Normally Open Type. (x4) https://geni.us/ReedSwitch
And some Bolts and screws (M4x5mm x four and M1.6x3mm x two)
Projects PCB: https://www.pcbway.com/project/shareproject
 

These are some of my favourite tools I use and can recommend:
Battery-powered glue gun: http://geni.us/BoschBatteryGlueGun
Bosch Bit Driver: https://geni.us/Bosch-Screwdriver
I use a Prusa MK4 for my projects and highly recommend both it and the Prusa Mini. If I inspired you to take up 3D printing please consider purchasing a printer via this link: http://shop.prusa3d.com/#a_aid=diymachines

Prusa support my channel when you use that link at no cost to yourself. :)

==========

Wiring diagrams, FAQ etc can be found here: https://www.diymachines.co.uk/make-your-own-kinetic-coasters 

SAY THANKS: Provide continual and dependable support through Patreon: https://www.patreon.com/diymachines

Or join this channel on Youtube Memberships: https://www.youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ/join

Buy me a coffee to say thanks: https://ko-fi.com/diymachines

SUBSCRIBE:

https://www.youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
INSTAGRAM: https://www.instagram.com/diy_machines
FACEBOOK: https://www.facebook.com/diymachines/
ETSY: https://www.etsy.com/uk/shop/DIYMachines
 

 ========== List of camera and lighting equipment I use:

Sony A7 III: https://geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : https://geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: https://geni.us/AputureAmaranHR672C
Aputure MC: https://geni.us/FAPGL
RØDE VideoMic Pro+: https://geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: https://geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: https://geni.us/PhilipsHue-LightStrip
Disclaimer: This video is shared for demonstration purposes only.

KINETIC COASTERS with a TWIST! Laser or 3D Print some DIY Magic

Top - Honeycombe.3mf

Stay organized in style with this functional and style with this functional and versatile 3D model from Thangs.com, designed by CL3D PRINTING. This ingenious conception brilliantly serves as a Tavern Can for keeping your 12-ounce beverage chilly, and as a Pen Holder to keep your workspace tidy. Adaptable for multi-color printing or post-print painting, this model integrates practical use with a fun, tavern-themed aesthetic. Engineered to be support-free, it effortlessly accommodates a standard 12-ounce can. Explore Thangs.com for more such intricately designed 3D Printing models in the "Functional/Organizers" category.

Relish this model for private uses and join as a MEMBER for advantageous commercial usage. Membership also unlocks priority recommendations and customization options, presenting you with an array of 3D models tailored to your preferences. Connect with us by liking, following, and posting your creations. We would be thrilled to see and appreciate your initiative! Perfect your 3D printing and organizing skills with this palm-sized tavern can/pen holder.

Tavern Can / Pen Holder

tavern koozie.stl

Looking for a special way to enjoy your favorite beverage? Discover the intricately detailed Dragon Tail Pint Glass Holder available on thangs.com. This impressive 3D model, specially designed by CL3D PRINTING, is perfect for making your everyday pint an adventurous affair. The dragon tail design not only adds a mythical feel to your drink but also keeps it nice and cold. Depending on your printer, this nifty bartending essential requires minimal support at the base of the tail. Remember, this dragon tail pint glass holder is designed for private use only, but you can always become a member for commercial licenses or for more exciting content. Check it out, and don't forget to like and share your creation! Turn your pleasurable sips into thrilling gulps with this unique dragon tail pint glass holder. Feel the coldness of a dragon’s breath in every drink – only at thangs.com.

Dragon Tail Pint Glass Holder / Koozie

Dragon Pint with Tail.stl

Introducing the innovative, 3D printable Christmas Coasters with Built-in Bottle Openers available on thangs.com. Designed with a festive spirit in mind, these coasters are perfect for imbuing your home decor with a holiday feel, while serving a practical purpose. Each coaster features a crisp holiday design made using green and white PLA, with a hidden metal bottle opener incorporated at the bottom - a conversation starter at any table, bar, or Christmas gathering. 

The set also includes a matching holder, fashioned out of black PLA, ensuring the coasters are neatly stored and always ready to use. This multi-colored 3D model is recommended to be printed using a multicolor printer, with light supports, due to a slight overhang in the design. The bottle opener hardware easily installs after printing. 

Fun, functional and festive, these Christmas coasters provide a trendy solution for parties, home bars, and seasonal decor. Not only are they great for personal use, but they also make for an exciting and practical gift for the holiday season. Capture the Christmas spirit with this multi-purpose 3D printable coaster set that seamlessly blends holiday style and everyday functionality. 

Discover more about the 3D Printed Christmas Coasters with Built-In Bottle Openers, a product of designer BrodyMakes, by browsing our Home & Garden/Home Decor & Accessories category on thangs.com. Conjure up the holiday spirit by integrating this versatile decor element into your festive arrangement. Celebrate the season in style with these special 3D printable coasters!

Christmas Coasters with Built-In Bottle Openers – Festive 3D Printable Coaster Set

Christmas Coasters with Bottle Openers.3mf

Let’s be honest, who is really taking the time to spread out a kitchen towel tidy over a bar? And If you are using a hook - it is often a struggle to find the loop and the towel is probably still wet after a few hours.
This simple and well working solution is a mix between the two options. Just throw the towel over and don’t worry about it not drying or falling down.
 
You can either screw or glue it onto your wall or cabinet. There are various glue or tape products for wall fixation out there. I used 3M Tape.

Diameter of the two screw holes: 5,5mm

Size: ca 175 × 75 × 50 mm

**Print settings**
Required build volume: 180 x 180 x 60 mm
Material usage: 40g
Print time: 4h – 5h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm – 0,28 mm
Outer walls: 3
Infill: 20%
Build plate adhesion type: none

Towel hanger

Let’s be honest, who is really taking the time to spread out a kitchen towel tidy over a bar? And If you are using a hook - it is often a struggle to find the loop and the towel is probably still wet after a few hours.
This simple and well working solution is a mix between the two options. Just throw the towel over and don’t worry about it not drying or falling down.
 
You can either screw or glue it onto your wall or cabinet. There are various glue or tape products for wall fixation out there. I used 3M Tape.

Diameter of the two screw holes: 5,5mm

Size: ca 175 × 75 × 50 mm
Don't forget to post your makes!

**Print settings**
Required build volume: 180 x 180 x 60 mm
Material usage: 40g
Print time: 4h – 5h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm – 0,28 mm
Outer walls: 3
Infill: 20%
Build plate adhesion type: none
If you experience any problems, please feel free to contact me on twitter or Instagram

BAr

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Tamiya Blackfoot Ford F150 Roll Bar, two Versions

KINETIC COASTERS with a TWIST! Laser or 3D Print some DIY Magic

Tavern Can / Pen Holder

Dragon Tail Pint Glass Holder / Koozie