Bathroom Organiser

Bathroom Organiser Body.STEP

Snow Mouse Soap Holder

snow mouse body.stl

Stone Wall Planter Round

stone-wall-planter-round.stl

Soap Holder 2

Soap Holder 2.STEP

Hanging Trash Can

D.stl

Bathroom Organiser Small Version

Bathroom Organiser Body Small Version.STEP

Toilet paper holder print-in-place

**A quick and easy toilet paper holder. The design is print-in-place and uses very little material.**

**Instructions:**
- Print the thing
- Glue it on the wall with 3M tape or wall mount glue.

Don't forget to post your makes!

**Print settings**
Required build volume: 130 x 160 mm
Material usage: 35g
Print time: 2h – 3h

Material: PLA
Print direction: stl is rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 5
Infill: 30%
Build plate adhesion type: none
If you experience any problems, please feel free to contact me on twitter or Instagram

Bathroom Organiser Ripple Version

Bathroom Organiser Drip Tray Ripple Version.STEP

Soap dish with legs

body.STL

Cotton Swab + Pad Holder Type 4 (Includes 7 Variants)

Cotton Swab + Pad Holder Type 4 Style 1_STL.stl

Gillette Razor Wall Holder

3dponto_Gillette_Razor_Wall_Holder_Large.stl

Trash can with swing lid

Body_regular.stl

Ribbed Double Toothbrush Holder Set, Organizer

TH009.stl

Towel hanger

Let’s be honest, who is really taking the time to spread out a kitchen towel tidy over a bar? And If you are using a hook - it is often a struggle to find the loop and the towel is probably still wet after a few hours.
This simple and well working solution is a mix between the two options. Just throw the towel over and don’t worry about it not drying or falling down.
 
You can either screw or glue it onto your wall or cabinet. There are various glue or tape products for wall fixation out there. I used 3M Tape.

Diameter of the two screw holes: 5,5mm

Size: ca 175 × 75 × 50 mm
Don't forget to post your makes!

**Print settings**
Required build volume: 180 x 180 x 60 mm
Material usage: 40g
Print time: 4h – 5h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm – 0,28 mm
Outer walls: 3
Infill: 20%
Build plate adhesion type: none
If you experience any problems, please feel free to contact me on twitter or Instagram

BATHROOM

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Bathroom Organiser

Snow Mouse Soap Holder

Stone Wall Planter Round

Soap Holder 2

Hanging Trash Can

Bathroom Organiser Small Version

Toilet paper holder print-in-place

Bathroom Organiser Ripple Version

Soap dish with legs

Cotton Swab + Pad Holder Type 4 (Includes 7 Variants)

Gillette Razor Wall Holder

Trash can with swing lid

Ribbed Double Toothbrush Holder Set, Organizer

Towel hanger

Ripple Tissue Boxes

Travel Soap Case (Three Sizes)

Art Nouveau Planter

Sink Tray Type 2

Cotton Swab + Pad Holder

Cotton Swab + Pad Holder Style 3