cute corgi

Corgi (1).stl

St Patty's Flexi Gnome - Articulated Fidget Toy

StPatricks_StPattysGnome.stl

M3D - Flexi Baby Dimetrodon

M3D-BabyDimetrodon-V2.stl

Unicorn Dragon

Cinderwing3D UnicornDragon.stl

Witch Hat Snappy Cat - Articulated Snap-Flex Fidget (Loose Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

**Loose Tolerance**

The cauldron is bubbling, the potions are pouring, and this mystical kitty is up to no good.  With a twitch of its nose and a flick of its paws it weaves magical spells that defy natures laws.  

As the time slips away through a long boring day you may find that your fingers are growing quite bored.  You may reach for a widget but it doesn't quite fidget like the fun little friend in your pocket that's stored.  

So put that phone away and delightfully play with this witchy  and whiskered fun companion that can only be known by its true name alone, and that moniker is the **Witch Hat Snappy Cat**.

Witch Hat Snappy Cat is the newest playful pet on the prowl in the Snap-Flex collection.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Loose** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Witch Hat Snappy Cat:**
https://than.gs/m/940295
**Medium Tolerance Witch Hat Snappy Cat:**
https://than.gs/m/940296

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like Snappy Cat, be sure to check out its more mystical, magical twin: Witch Hat Snappy Cat:

**Tight Tolerance Snappy Cat:**
https://than.gs/m/940287
**Medium Tolerance Snappy Cat:**
https://than.gs/m/940289
**Loose Tolerance Snappy Cat:**
https://than.gs/m/940290

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Articulated Pokémon - Mega Gyarados

Mega Gyarados (Whiskers).stl

Mini Lightsaber

collapsing-mechanism_saber.stl

Cute Stegosaurus - Articulated - No Supports - Print in Place

Stegosaurus.stl

Prosecco Articulated Wine Bottle Fidget Toy

prosecco (2).3mf

Cloaked Skeleton - Articulated Flexi Fidget Toy

CloakedSkeleton_BambuMulticolor_Mimetics3D.3mf

Heartbreaker, Baby Love Dragon - Articulated Dragon Snap-Flex Fidget (Tight Joints)

HeartBreaker_ArticulatedDragon_Tight.stl

Fixum Dude Motors Print in Place Ambulance

Introducing the FDM (Fixum Dude Motors) print in place ambulance.

Prints without supports. Samples are printed in PLA with at least 3 perimeters and 10%-15% gyroid infill. 

Articulated Axolotl v2.stl

Another Articulated axolotl. I made better looking hinges, at the cost of it being more flexible. I also gave it better legs and feet.

Cute Tiny Articulated Kawaii Cat with Paws

Cat flex standing short tail.3mf

Small Pixel Tree Fidget

Small Pixel Tree.3mf

Centipede 2 - Articulated - Print-in-Place - dragon eater

centipede2.stl

Goat Keychain

BOBgoatkeychain.stl

FDM_PrintInPlace_Firetruck_V1.stl

Fixum Dude Motors PiP Fire Engine 

Description

Introducing the FDM (Fixum Dude Motors) print in place fire engine. The wheels rotate right off the build plate so you can respond to any emergency right away.

- Prints on its side without supports. Sample printed in:
Hatchbox Red PLA on the Bambu X1 Carbon in .20LH, with 4 top/bottom layers, 3 perimeters and 10% gyroid infill (at least 3 perimeters recommended when used as a child's toy)

Pocket Pet - Flexi Baby Sawfish

SAWFISH KEYCHAIN.stl

Flexi Hamster

Hamster.stl

Articulated

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

cute corgi

St Patty's Flexi Gnome - Articulated Fidget Toy

M3D - Flexi Baby Dimetrodon

Unicorn Dragon

Witch Hat Snappy Cat - Articulated Snap-Flex Fidget (Loose Joints)

Articulated Pokémon - Mega Gyarados

Mini Lightsaber

Cute Stegosaurus - Articulated - No Supports - Print in Place

Prosecco Articulated Wine Bottle Fidget Toy

Cloaked Skeleton - Articulated Flexi Fidget Toy

Heartbreaker, Baby Love Dragon - Articulated Dragon Snap-Flex Fidget (Tight Joints)

Fixum Dude Motors Print in Place Ambulance

Articulated Axolotl v2.stl

Cute Tiny Articulated Kawaii Cat with Paws

Small Pixel Tree Fidget

Centipede 2 - Articulated - Print-in-Place - dragon eater

Goat Keychain

FDM_PrintInPlace_Firetruck_V1.stl

Pocket Pet - Flexi Baby Sawfish

Flexi Hamster