**For Instructions Download the:**
>[GEN2 Interactive Catalog Download](https://tinyurl.com/GEN2system)

The Crystal Series is part of the GEN2 Decor series. The handles and knobs can mixed and matched with different faceplates to create a unique personalized storage solution that is completely 3D printable.

**What You'll Need**
 
**BASE DRAWER MODELS**
• GEN2 Decor Drawers - Standard - https://than.gs/m/1116945

**FACEPLATES**
• Essential Series- [DOWNLOAD](https://than.gs/m/1116946)
• Chevron Series - [DOWNLOAD](https://than.gs/m/1116950)
• EdgeMetal Series - [DOWNLOAD](https://than.gs/m/1134534)

**HARDWARE**
Includes affiliated links to help support my projects
• M3 nuts and screws: M3x6 - M3x10- [I prefer this kit](https://amzn.to/3LSaQFv)
 

**INSTRUCTIONS**
• Push M3 nuts into slots on handles/knobs

• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.



GEN2 Decor - Handles - Crystal

Crystal B Wide - Handle 44mm .stl

Download includes five sizes from 50-150mm. Each size comes with options for standard or spiralized printing. Looks great with dual or tri color filament!

Origami Vases

Origami Vase - Standard 125.stl

Watch this little cube vanish when viewed from just the right angle! The PERSPEKTIVA series is derived from my CORRUGA prints, except the walls are now angled to cancel out perspective convergence to dissapear even more! There are some steep overhangs but a well tuned printer and good filament makes it work. This smaller print may not be as impressive as the larger PERSPEKTIVA models, but it's a great way to test your printer and it still makes a neat little object of curiousity!

**_Printing Guidelines_**

Print solid without supports using a 0.4mm nozzle. 0.12mm layer height for cleaner overhangs, or 0.16mm to save time. NO SUPPORTS. This small cube is 50mm x 50mm x 50mm. 'Arachne' slicing method may produce a cleaner part, but it is also likely to crash your program! In that case 'Classic' slicing is still acceptable.

These prints involve a ton of retraction, so make sure you've got your settings dialed in for the best results!

---

Photographed model was printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Panchroma Gradient Matte PLA](https://us.polymaker.com/products/panchroma-gradient-matte?variant=43616479215673&aff=193&utm_source=affiliately&utm_campaign=aff) (Also on [Amazon](https://amzn.to/41QvhdB)).*

*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_

Angled

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

GEN2 Decor - Handles - Crystal