Stylish little Glock-inspired pistol blaster toy keychain with a slide you can pull to cock the bolt mechanism! Shoots 6mm plastic airsoft BBs!

&nbsp;

---

**Printing tips:**
All the parts are oriented in the correct printing orientation. If your printer is not good at bridging, use supports for the _Frame_ and _Slide_. You can print the _Slide_ either horizontally or vertically.

If you use Bambu Studio or OrcaSlicer, a handy print project file is included!

&nbsp;

---

**Assembly:**
You'll need superglue, a short (15-20mm) rubber band, small 5mm diameter spring 15-25mm long, and one M3 bolt at least 10mm long. See the included assembly video!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

Glock Keychain — Functional Blaster Toy

Frame.stl

_The model is available for free for all my membership subscribers (and available to buy individually). [Check out my membership tiers!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D)_

---

&nbsp;

Ever since I made the [Tickler BB-13](https://than.gs/m/1034516?affiliateCode=Jaatinen3D), I've wanted to design a double barrel shotgun using the same mechanism. Here it finally is and it's ready to kick ass!

See it in action here: https://www.youtube.com/watch?v=xsVJvoRTt0Y

Includes a complimentary **Shotgun Shell Weapon Charm**! The weapon charm chain has an end clip that is compatible with all my Ringchaku designs, so you can attach any Ringchaku end to it! Although most of them are probably too big... But stay tuned for more weapon charms in the future!

**Assembling this requires no glue or bolts or nuts! Apart from the printed parts, you'll only need:**
- One pen spring *(max 5mm diameter, 15-20mm uncompressed length, <9mm length compressed)*
- Two rubber bands (10-30mm diameter)

&nbsp;

---

➡️ [There's a display stand available for this gun!](https://than.gs/m/1056358?affiliateCode=Jaatinen3D) ⬅️

&nbsp;

---

**Printing tips:**
All the parts are oriented in the correct printing orientation.

Use supports for *Trigger Assembly Cover Left* and *Trigger Assembly Cover Right*. All others are up to how your printer can handle small bridges and overhangs.

I recommend printing the *Barrel Lock Latch* in a "slippery" filament (not matte) because otherwise you might not be able to slam the barrel closed due to friction between the barrel and the latch.
&nbsp;

---

**Assembly:**
Watch the included assembly video!

&nbsp;

---

If you don't have BBs, I've included a printable bullet that works at least as well as a BB!

---

&nbsp;
_There's been a rumor of a_ charming _little mystery... You should check it out, maybe there's something in it for you? [I've marked it on your map.](https://jaatinen3d.com/arvoitus/)_

Rutku BB-20 — Fully 3D-printable airsoft shotgun with shells

Rutku BB-20 - Bambu Printers.3mf

Shotgun Shell Charm.stl

Ringchaku Charm Chain.stl

Stylish latched storage container inspired by the military ammo box! No glue or hardware required to assemble!

This model can be scaled up uniformly to a larger size if needed.

&nbsp;

---

**Printing tips:**
No AMS required to make this multicolor, all the different colored parts are separate!

The following parts require supports:
- _Box_ — Normal (snug) supports for the hinges and latch plate
- _Lid_ — Normal (snug) supports (NOT only on build plate) for the latch wire loop
- _Latch_ — Tree supports, on build plate only

If you use Bambu Studio or OrcaSlicer, a handy print project file is included with the settings I used to print this!

&nbsp;

---

**Assembly:**
See the included assembly video (above the promo pics)!

Ammo Box Container — Military Style Storage Box

Box.stl

Revolver cylinder fidget spinner toy with bullets that magnetically and satisfyingly pop in and out. Spinner, loader, toggler and clicker in one stylish package!

&nbsp;

---
**Printing tips:**
The parts are already oriented optimally. No supports needed for any parts!

If you're using Orca Slicer or Bambu Studio, a handy project file is included that has my print settings and painted parts ready to go!

&nbsp;

---
**Assembly:**
You need 6x2mm magnets for the cylinder, and either 6x 6x3mm or 12x 6x2mm round magnets for the bullets. The bullet tip has enough room for one 6x3mm or two 6x2mm magnets.

See the included assembly video!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

Ammo

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Glock Keychain — Functional Blaster Toy

Rutku BB-20 — Fully 3D-printable airsoft shotgun with shells

Ammo Box Container — Military Style Storage Box

Revolver Cylinder Fidget Spinner Toy