太陽伊布(精靈寶可夢)
Espeon(Pokémon)

I

Espeon(Pokémon)

復活節兔
Easter bunny

If you like my work, share and give me a like.

-------------------------------------------------------------------------------------------------------

Follow me here:
https://www.facebook.com/PatrickFanart.HK

-------------------------------------------------------------------------------------------------------

Support me:
https://www.patreon.com/PatrickFanart

-------------------------------------------------------------------------------------------------------
License:
Attribution．Noncommercial．No Derivative Works

Espeon_50mb.stl

VROUBEK lampshade

ribbed_lampshade.STL

Zombie Captain America (Pre-Supported)

Bust.stl

Valentine Bear

ValentineBearSTL.stl

Stackable Crate (large)

Star Christmas Tree Ornament

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**WHAT IS IT?**
This is a fun Christmas tree ornament that would also make a fun suncatcher if it's printed with transparent filament. It's reminiscent of a cross, a star (it actually has 8 points), classical western architecture, and more. Using my settings, it's a nice weight at 100% and extremely light at 75% and smaller.

**EASY PRINT**
If you use my settings, you shouldn't have any problems getting this to print. If you print this with your printer's default settings, you'll get a paperweight with a mushy top.

**RESIZING**
At 100%, the ornament is a nice size for larger trees – especially for the base of the tree where you'd expect larger ornaments. However, you can scale this down to 50% and still get nice prints. At that size, the ornament looks good on miniature trees. I haven't tried printing it larger than 100%.

**PRINT TIME**
With my settings, it will take about 4.5 hours to print at 100% scale. At 50%, it takes a little over an hour.

**COLOR-CHANGE PLA**
I used TTYT3D's quick color change PLA. If you print one ornament with it at 100% with it, you'll get a subtle color change. For a more dramatic change, like in the size comparison photo, print several ornaments at once. To go all the way from gold to blue, you'll need the estimated print weight to be at least 75 grams (4 ornaments at 100%).

**HOW DO YOU HANG IT?**
I've concealed attachment points one the back of one of the points of the star. Just tie a piece of coat thread to them to create a loop.

**PRINT SETTINGS**
You'll generally want to print this at the lower end of your PLA's temperature range. I print TTYT3D PLA at 180 degrees, which is well below their recommended temperature. Maybe my printer just runs hot, but that temp prints more accurately with less stringing.

*Thickness*

* Layer thickness: .15mm
* Wall thickness: 0.4mm and choose the “alternate extra wall” option so it alternates between 0.4 and 0.8mm walls with each layer (if you're using Cura – other slicers may not have this option). The alternate extra wall seems to prevent gaps in the print while minimizing the overall weight of the ornament. If you print below 75% scale, I suggest printing at 0.4mm without the alternate extra wall. I would also print without the alternate extra layer if you're using transparent filament.
* Top/bottom thickness: 2 layers for opaque filament, 1 for transparent filament
* Initial bottom thickness: 3 layers

*Infill*
This doesn't need any infill. Seriously.

*Speed*
You'll want to use slow printer settings to that the print is accurate and to reduce the pull on the thin arms of the topper.

* Overall: 60mm/s
* Outer wall: 40mm/s
* Inner wall: 50mm/s
* Travel Speed: 100mm/sec

*Build Plate Adhesion*
I printed with just a skirt and it worked well every time. If you have difficulty getting the details of the first layer to adhere to your bed, try adding a raft.

*Supports*
I added supports to get the outer points of the ornament to print better, but you can do without them. The supports I added made little difference in print time or the amount of filament used. I found that adding supports on the side with the attachment points (for strings) was problematic (attachment points broke before supports separated) and unnecessary (model printed fine without the supports). So, I added a support blocker to that corner. Support settings:

* Placement: touching Buildplate
* Overhang: 69 degrees
* Pattern: Lines
* Density: 12%
* Enable Support Brim: Yes
* Brim Width: 4mm

*Common Problems*
* Uneven print: Reduce print speed or try scaling the print up in the Z dimension only. Scaling disproportionately may impact how the ornament hangs.
* Mushy print: Reduce print temp, increase cooling, or print more than one ornament at a time. 

Ironman new 

Balloon Doggy Yoga -Herd Pose

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by @ChelsC423***
A fun series of balloon animals I've always wanted to make! Hope you enjoy!

***
***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***
***
If you would like to support me AND receive exclusive to Patron models every month check me out here:
https://www.patreon.com/chaoscoretech

Strawberry Turtle

Strawberry turtle.stl

Pumpkin Pals - Jack O Lantern - Upset

extrasadjack.stl

Voltorb (Pokemon)

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by Garrett**
***
If you would like to support us and receive exclusive to Patron models every month check us out here:
https://www.patreon.com/chaoscoretech

***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***

voltorb.stl

M3D - Flexi Baby Pig

M3D-BabyPig_v1.stl

Glue Stick Gridfinity

This is a gridfinity block made for holding mini glue sticks.

Cable Organizer

3dponto_Cable_Organizer.stl

Slenderman (Pre-Supported)

Slenderman.stl

Rotary Tool Table Mount

Rotary Tool Table Mount.stl

The Ariko Planter Pot with Drainage Tray & Stand Included: Modern and Unique Home Decor for Plants a

ARIKOPOT.stl

Lazy Dogs

Lazy Dog-Dalma_v0.stl

Botanical Bundle for Trellis

Planter Box.stl

Horizontal Dense Gridfinity 14x 2.5" SSD Storage Tray

A densely packed tray for holding SSD (7mm) drives horizontally. Spaced more for density than for easy grabbing. The slots are dimensionally fairly tight so they don't sag (they are drawn with 2mm extra length and no extra width) so if you have issues with dimensional accuracy you may want to do a test section.

Horizontal Dense Gridfinity 2.5" SSD Storage Tray

A

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Espeon(Pokémon)

VROUBEK lampshade

Zombie Captain America (Pre-Supported)

Valentine Bear

Stackable Crate (large)

Star Christmas Tree Ornament

Ironman new

Balloon Doggy Yoga -Herd Pose

Strawberry Turtle

Pumpkin Pals - Jack O Lantern - Upset

Voltorb (Pokemon)

M3D - Flexi Baby Pig

Glue Stick Gridfinity

Cable Organizer

Slenderman (Pre-Supported)

Rotary Tool Table Mount

The Ariko Planter Pot with Drainage Tray & Stand Included: Modern and Unique Home Decor for Plants a

Lazy Dogs

Botanical Bundle for Trellis

Horizontal Dense Gridfinity 14x 2.5" SSD Storage Tray