Drill bit storage trays

Gridfinity bin 3x3x3.stl

Mother's Day- Rocking Chair

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND

This model will print WITHOUT SUPPORTS!

If you would like to sell physical objects, please see the Chaos Core Partner tier on https://www.patreon.com/chaoscoretech

Phone Holder + Desk Organiser Type 7

Phone Holder + Desk Organiser Type 7.STEP

EZPZ Keyring 1" // Keychain Ring

EZPZ_ring_1in.stl

Gridfinity - 1-2-3 Block Holder

This is a Gridfinity System 1-2-3 block holder based off of [Zach Freedman's GridFinity System](https://www.youtube.com/watch?v=ra_9zU-mnl8).

I printed using 0.25mm layer height with PLA on my Lulzbot Mini v1.

Gridfinity - 1-2-3 Block Holder.stl

The Tomo Planter Pot with Drainage Tray & Stand: Modern and Unique Home Decor for Plants

TOMOPLANTER.stl

Budsy, weekly pill dispenser.

Leaves.stl

Little Goku

The Goku small Minature

3D Printing Model
Easy to Print

This model is licensed under_[ theCreative Commons - Attribution - Non-Commercial - Share Alikelicense.](https://creativecommons.org/licenses/by-nc-sa/4.0/)_

3D Printed Gaming Map - Inspired by "Nuke" - Fan Art

Grey_White_Map.stl

4x3x0.25 CU - Simple Walls - Multibin Shell

4x3x0.25, No Lock Holes, Multigrid Bin.stl

Twist Lock Container Medium

Twist Lock Container Medium Base 100x100.STEP

Copper Cauldron

Here is the file for the Copper Cauldron

its a simple Cauldron for Halloween that prints with Zero supports for your decorations.

I hope you enjoy.

and Happy Halloween

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

Buy me a coffee

https://www.buymeacoffee.com/bugman140

 

Copper cauldron

Baby Sloth Fidget with solid legs

BOBslothsolidlegsv2.stl

Brick Desktop Organization System

Brick Desktop Organization System.3mf

Gridfinity pen holder

Pretty simple pen holder, holds a decent amount.

M3D - Flexi Baby Chameleon

M3D-BabyChameleon.stl

Open Spiral Christmas Bell

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**CHALLENGING PRINT**
If you just got your first 3D printer and are looking for your first thing to print, this isn't it. Using the settings I recommend below, an experienced maker should be able to get a good print without many failed attempts.

**COMMON PRINTING PROBLEMS**
Assuming you use the print settings I recommended below, here are some common problems and possible fixes:
* Mushy print: Reduce print temp.
* Comes off bed: Increase raft size. Reduce print speed.
* Print looks rough: Reduce print speed.
* Breaks during printing: Reduce print speed and print temperature. If you can, increase cooling. Add more supports.

**PRINT TIME**
With my settings, it took about 3.5 hours.

**PRINT SETTINGS**
*Thickness*

* Layer thickness: .15mm
* Wall thickness: 0.8mm. If you want to go thinner to reduce weight, consider using Cura's “alternate extra wall” option so it alternates between 0.4 and 0.8mm walls with each layer. That may prevent gaps in the print.
* Top/bottom thickness: 0.3mm

*Infill*
This doesn't need any infill. Seriously. 

*Speed*
You'll want to use slow printer settings to that the print is accurate and to reduce chance the bell is pulled off the plate curing printing.

* Overall: 60mm/s
* Outer wall: 30mm/s
* Inner wall: 40mm/s
* Travel Speed: 65mm/sec

*Build Plate Adhesion*
The first layer of the bell is just a thin circle. I've found that a raft works well to provide bed adhesion. It also separates more cleanly than a brim for this model. 

*Supports*
This print absolutely requires supports to keep the spiral arms from breaking. By setting the overhang angle to 45 degrees, you get support exactly where you need it: at the base where the arms touch the rim and then curve, and at the roof of the bell. It's a lot lower angle than you might normally use, but it's needed for this design.

* Support placement: Touching buildplate
* Support overhang angle: 45 degrees
* Support pattern: Gyroid
* Support wall line count: 1
* Support density: 10%

Locking Twist Capsule

Top - Small Twist Capsule (Original).stl

Gourdo the Pumpkin

gourdo.stl

Dice Jail - DnD Dice Jail Box - Free Version

The dreaded "Nat 1", every dice rollers demise. Always rolling too low when it counts and high when it doesn't? Put your naughty dice in time out, and let them sit and think about what they rolled.

This is the digital version of the same Dice Jail we physically sale on our store. This version is only for the DIGITAL file to create one of these dice jails yourself on your own 3d printer. 

Interested in selling the physical 3d printed versions of this file? Purchase from our Etsy store or on Cults3d to receive the permissions to sell commercially, find the link in our bio or the link below! Purchased version comes with a larger bed of the same model, as well as additional versions with the phrases "Fucked Around & Found Out" and "You done messed up A-A-Ron."

Follow our social media to see our other products and see what new things we are making!
https://linktr.ee/Uglymunkey

Dice Jail - DnD Dice Jail Box

A

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Drill bit storage trays

Mother's Day- Rocking Chair

Phone Holder + Desk Organiser Type 7

EZPZ Keyring 1" // Keychain Ring

Gridfinity - 1-2-3 Block Holder

The Tomo Planter Pot with Drainage Tray & Stand: Modern and Unique Home Decor for Plants

Budsy, weekly pill dispenser.

Little Goku

3D Printed Gaming Map - Inspired by "Nuke" - Fan Art

4x3x0.25 CU - Simple Walls - Multibin Shell

Twist Lock Container Medium

Copper Cauldron

Baby Sloth Fidget with solid legs

Brick Desktop Organization System

Gridfinity pen holder

M3D - Flexi Baby Chameleon

Open Spiral Christmas Bell

Locking Twist Capsule

Gourdo the Pumpkin

Dice Jail - DnD Dice Jail Box - Free Version