Stylish little Glock-inspired pistol blaster toy keychain with a slide you can pull to cock the bolt mechanism! Shoots 6mm plastic airsoft BBs!

&nbsp;

---

**Printing tips:**
All the parts are oriented in the correct printing orientation. If your printer is not good at bridging, use supports for the _Frame_ and _Slide_. You can print the _Slide_ either horizontally or vertically.

If you use Bambu Studio or OrcaSlicer, a handy print project file is included!

&nbsp;

---

**Assembly:**
You'll need superglue, a short (15-20mm) rubber band, small 5mm diameter spring 15-25mm long, and one M3 bolt at least 10mm long. See the included assembly video!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

Glock Keychain — Functional Blaster Toy

Frame.stl

---

**📦[Keychain Blaster Gift Crate](https://than.gs/m/1155174?affiliateCode=Jaatinen3D) — a stylish storage and gift box that has an insert designed for this blaster!**

---
&nbsp;

_The Desert Eagle is pure excess — massive, unmistakable, and built to make an impact. More icon than sidearm, it’s all about presence._

&nbsp;

---

A compact Desert Eagle -inspired keychain blaster designed for maximum fun in a minimal form factor!

This tiny hand cannon shoots standard 6mm airsoft BBs and features a removable magazine with a 5-round capacity, making it surprisingly satisfying to load and fire despite its size. The design focuses on clean mechanics, reliable function, and a crisp tactile feel.

Perfect as a desk toy, fidget gadget, or just a pocket-sized conversation starter.

&nbsp;

---

**Printing tips:**
No AMS required to make this multicolor, all the different colored parts are separate!

All the parts are already in the optimal orientation for printing!

The following parts require supports:
- _Frame_ — Normal supports
- _Hammer_ — Normal supports
- _Front Slide_ — Normal supports, just a little for the front sight

_Rear Slide_ has small built-in supports you have to remove before assembly.

I recommend brim for the _Rear Slide_ because it warps very easily at the back and the contact area is pretty small. It's also a good idea to use brim for _Barrel_, _Front Slide_, _Rear Slide Spring Cap_ and _Grip_ depending on your bed adhesion.

If you use Bambu Studio or OrcaSlicer, a handy print project file is included with the settings I used to print this!

&nbsp;

---

**Assembly:**
You'll need superglue and two small 5mm diameter springs 20-25mm long.

See the included assembly video (listed above the promo pics)!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

Desert Eagle Keychain — Functional Blaster Toy

---
_**Check out [all my other Keychain Blasters](https://than.gs/c/75244?affiliateCode=Jaatinen3D) as well!**_

---

**📦[Keychain Blaster Gift Crate](https://than.gs/m/1155174?affiliateCode=Jaatinen3D) — a nice storage and gift box that has an insert designed for this blaster!**

---

&nbsp;

A new, greatly improved version of my first [Glock Keychain Blaster](https://than.gs/m/1146675?affiliateCode=Jaatinen3D) — the bolt action is gone and the mechanism is completely internal! Pulling the slide primes the blaster to fire and the trigger shoots!

It also has a magazine that stores 4 BBs to go!

Shoots 6mm airsoft BBs.

This piece looks great in your keychain as well as being a fun toy and an addictive fidget slider & clicker!

It also has the exact same dimensions as the previous version, so it fits in the same [Keychain Blaster Gift Crate](https://than.gs/m/1155174?affiliateCode=Jaatinen3D) insert!

&nbsp;

---

**Printing tips:**
No AMS required to make this multicolor, all the different colored parts are separate!

All the parts are oriented in the correct printing orientation. If your printer is not good at bridging, use supports for _Frame_. Use organic/tree supports for _Slide_.

If you use Bambu Studio or OrcaSlicer, a handy print project file is included with the settings I used to print this!

&nbsp;

---

**Assembly:**
You'll need two small 5mm diameter springs 20-25mm long. A lighter is also recommended to more securely attach the _Slide Pin_.

See the included assembly video (listed above the promo pics)!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

Glock Keychain V2 — Functional Blaster Toy

Little brother to the [Tickler BB-13](https://than.gs/m/1034516?affiliateCode=Jaatinen3D) and [Tickler SA-6](https://than.gs/m/1066044?affiliateCode=Jaatinen3D), but this one is spring powered and ejects the shells automatically! It's half blaster, half satisfying fidget toy! Works with both 3d-printed bullets and 6mm airsoft BBs!

---

&nbsp;

**Printing tips:**
All the parts are already aligned in the orientation they should be printed in. The _Frame Half 1 & 2_, _Firing Pin_ and _Trigger_ require supports. _Slide_ has small built-in supports you need to remove after printing.

If you use Bambu Studio or OrcaSlicer, a handy print project file is included with the print settings I used to print this (many times)!

---

&nbsp;

**Assembly:**
You'll need __two pen springs__, __one stronger spring at least 25mm long__ and __one small rubber band__ to assemble this! Watch the included assembly video to see how it's done!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

9mm

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Glock Keychain — Functional Blaster Toy

Desert Eagle Keychain — Functional Blaster Toy

Glock Keychain V2 — Functional Blaster Toy

Tickler Mini — Shell-ejecting airsoft blaster