---
📦Make sure to also check out the [Keychain Blaster Weapon Gift Crate](https://than.gs/m/1155174?affiliateCode=Jaatinen3D) — a nice storage and gift box that has an insert designed for this blaster!

---

&nbsp;

The infamous .50cal Barrett M82 _anti-materiel_ rifle is now a .236cal (6mm) keychain blaster, protecting your keys!

- Realistic back-front bolt action
- Detachable magazine that holds 7 BBs and feeds into the blaster
- Detachable barrel to make it more compact to carry (and to fit in the [Keychain Blaster Gift Crate](https://than.gs/m/1155174?affiliateCode=Jaatinen3D), check it out as well!)
- Comes with a magazine carrier for 3 magazines on the go, and a barrel carrier to carry the detachable barrel separately if the full rifle is too long for you 😅

&nbsp;

---

**Printing tips:**
All the parts are already in the optimal orientation for printing!

Use normal supports for _Frame Bottom_ and _Rear Sight_.
Use tree supports for _Frame Bottom_, _Stock_, _Nozzle_ and _Scope_.
I recommend using brim for stability for _Frame Bottom_, _Frame Top_, _Barrel_, _Scope_, _Stock_ and _Firing Pin_.

If you use Bambu Studio or OrcaSlicer, a handy print project file is included with the settings I used to print this!

&nbsp;

---

**Assembly:**
You'll need superglue and a small 5mm diameter spring 20-25mm long. See the included assembly video!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

Barrett M82 Keychain — Functional Blaster Toy

Barrel Carrier.stl

Frame Bottom.stl

---
📦Make sure to also check out the [Keychain Blaster Weapon Gift Crate](https://than.gs/m/1155174?affiliateCode=Jaatinen3D) — a nice storage and gift box that has an insert designed for this blaster!

---

&nbsp;

_The most popular assault rifle in the world, the AK-47 is a durable, simple, and widely used Soviet-designed assault rifle known for its reliability in harsh conditions and ease of use._

Now also as a cute little keychain blaster that shoots 6mm plastic airsoft BBs, with a detachable magazine that can store 6 BBs!

&nbsp;

---

**Printing tips:**
No AMS required to make this multicolor, all the different colored parts are separate!

All the parts are already in the optimal orientation for printing!

_Frame_ requires tree/organic supports. The other parts don't need supports.

If you use Bambu Studio or OrcaSlicer, a handy print project file is included with the settings I used to print this!

&nbsp;

---

**Assembly:**
You'll need superglue and a small 5mm diameter spring 20-25mm long. See the included assembly video!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

AK-47 Keychain — Functional Blaster Toy

Frame.stl

Stock.stl

Stylish little Glock-inspired pistol blaster toy keychain with a slide you can pull to cock the bolt mechanism! Shoots 6mm plastic airsoft BBs!

&nbsp;

---

**Printing tips:**
All the parts are oriented in the correct printing orientation. If your printer is not good at bridging, use supports for the _Frame_ and _Slide_. You can print the _Slide_ either horizontally or vertically.

If you use Bambu Studio or OrcaSlicer, a handy print project file is included!

&nbsp;

---

**Assembly:**
You'll need superglue, a short (15-20mm) rubber band, small 5mm diameter spring 15-25mm long, and one M3 bolt at least 10mm long. See the included assembly video!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

Glock Keychain — Functional Blaster Toy

---

**📦[Keychain Blaster Gift Crate](https://than.gs/m/1155174?affiliateCode=Jaatinen3D) — a stylish storage and gift box that has an insert designed for this blaster!**

---
&nbsp;

_The Desert Eagle is pure excess — massive, unmistakable, and built to make an impact. More icon than sidearm, it’s all about presence._

&nbsp;

---

A compact Desert Eagle -inspired keychain blaster designed for maximum fun in a minimal form factor!

This tiny hand cannon shoots standard 6mm airsoft BBs and features a removable magazine with a 5-round capacity, making it surprisingly satisfying to load and fire despite its size. The design focuses on clean mechanics, reliable function, and a crisp tactile feel.

Perfect as a desk toy, fidget gadget, or just a pocket-sized conversation starter.

&nbsp;

---

**Printing tips:**
No AMS required to make this multicolor, all the different colored parts are separate!

All the parts are already in the optimal orientation for printing!

The following parts require supports:
- _Frame_ — Normal supports
- _Hammer_ — Normal supports
- _Front Slide_ — Normal supports, just a little for the front sight

_Rear Slide_ has small built-in supports you have to remove before assembly.

I recommend brim for the _Rear Slide_ because it warps very easily at the back and the contact area is pretty small. It's also a good idea to use brim for _Barrel_, _Front Slide_, _Rear Slide Spring Cap_ and _Grip_ depending on your bed adhesion.

If you use Bambu Studio or OrcaSlicer, a handy print project file is included with the settings I used to print this!

&nbsp;

---

**Assembly:**
You'll need superglue and two small 5mm diameter springs 20-25mm long.

See the included assembly video (listed above the promo pics)!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

Desert Eagle Keychain — Functional Blaster Toy

---
_**Check out [all my other Keychain Blasters](https://than.gs/c/75244?affiliateCode=Jaatinen3D) as well!**_

---

**📦[Keychain Blaster Gift Crate](https://than.gs/m/1155174?affiliateCode=Jaatinen3D) — a nice storage and gift box that has an insert designed for this blaster!**

---

&nbsp;

A new, greatly improved version of my first [Glock Keychain Blaster](https://than.gs/m/1146675?affiliateCode=Jaatinen3D) — the bolt action is gone and the mechanism is completely internal! Pulling the slide primes the blaster to fire and the trigger shoots!

It also has a magazine that stores 4 BBs to go!

Shoots 6mm airsoft BBs.

This piece looks great in your keychain as well as being a fun toy and an addictive fidget slider & clicker!

It also has the exact same dimensions as the previous version, so it fits in the same [Keychain Blaster Gift Crate](https://than.gs/m/1155174?affiliateCode=Jaatinen3D) insert!

&nbsp;

---

**Printing tips:**
No AMS required to make this multicolor, all the different colored parts are separate!

All the parts are oriented in the correct printing orientation. If your printer is not good at bridging, use supports for _Frame_. Use organic/tree supports for _Slide_.

If you use Bambu Studio or OrcaSlicer, a handy print project file is included with the settings I used to print this!

&nbsp;

---

**Assembly:**
You'll need two small 5mm diameter springs 20-25mm long. A lighter is also recommended to more securely attach the _Slide Pin_.

See the included assembly video (listed above the promo pics)!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

Glock Keychain V2 — Functional Blaster Toy

---
📦Make sure to also check out the [Keychain Blaster Weapon Gift Crate](https://than.gs/m/1155174?affiliateCode=Jaatinen3D) — a nice storage and gift box that has an insert designed for this blaster!

---

&nbsp;

The legendary _Karabiner 98 kurz_ bolt-action rifle from WWII, now available in your pocket, shooting 6mm caliber plastic airsoft BBs!

Includes files for both iron-sighted and scoped variants!

&nbsp;

---

**Printing tips:**
All the parts are oriented in the correct printing orientation. Use supports for _Stock_ and _Barrel_. If you print the _Stock_ nose down with supports, you can nicely color the band around the front of the stock with a filament swap!

If you use Bambu Studio or OrcaSlicer, a handy print project file is included!

&nbsp;

---

**Assembly:**
You'll need superglue, a small 5mm diameter spring 15-25mm long, and one M3 bolt at least 10mm long. See the included assembly video!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

Kar98k Bolt-action Rifle Keychain — Functional Blaster Toy

Kar98k Keychain - Bambu Project.3mf

Little brother to the [Tickler BB-13](https://than.gs/m/1034516?affiliateCode=Jaatinen3D) and [Tickler SA-6](https://than.gs/m/1066044?affiliateCode=Jaatinen3D), but this one is spring powered and ejects the shells automatically! It's half blaster, half satisfying fidget toy! Works with both 3d-printed bullets and 6mm airsoft BBs!

---

&nbsp;

**Printing tips:**
All the parts are already aligned in the orientation they should be printed in. The _Frame Half 1 & 2_, _Firing Pin_ and _Trigger_ require supports. _Slide_ has small built-in supports you need to remove after printing.

If you use Bambu Studio or OrcaSlicer, a handy print project file is included with the print settings I used to print this (many times)!

---

&nbsp;

**Assembly:**
You'll need __two pen springs__, __one stronger spring at least 25mm long__ and __one small rubber band__ to assemble this! Watch the included assembly video to see how it's done!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

Tickler Mini — Shell-ejecting airsoft blaster

Tickler Mini - Bambu Project.3mf

Yeah, I couldn't resist making a keychain blaster inspired by the AF2011, an anniversary edition of M1911, with double barrels... Check out [the normal M1911 pistol keychain blaster](https://than.gs/m/1429293?affiliateCode=Jaatinen3D) as well!

This little keychain sized functional single-double shot airsoft blaster, inspired by the Arsenal Firearms AF2011, shoots 6mm plastic airsoft BBs and has a magazine that can store up to 8 BBs! The finely crafted details of this toy pistol come to life even with a 0.4mm nozzle.

This piece looks great in your keychain as well as being a fun toy and an addictive fidget slider & clicker!

&nbsp;

---

**Printing tips:**
No AMS required to make this multicolor, all the different colored parts are separate!

All the parts are already in the optimal orientation for printing!

You need to print 2x _Firing Pin_.

The following parts require supports:
- _Frame_ — Tree/organic supports
- _Grip Rear_ — Normal supports
- _Hammer_ — Normal supports
- _Firing Pin_ — Tree/organic supports
- _Trigger_ — Tree/organic supports

I also recommend using brims for stability for _Slide_ and _Barrel_.

If you use Bambu Studio or OrcaSlicer, a handy print project file is included with the settings I used to print this!

&nbsp;

---

**Assembly:**
You'll need superglue and three small 5mm diameter springs 20-25mm long. A lighter is also recommended to more securely attach the _Slide Pin_.

See the included assembly video (listed above the promo pics)!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

AF2011 Pistol Keychain — Functional Blaster Toy

---

**📦[Keychain Blaster Gift Crate](https://than.gs/m/1155174?affiliateCode=Jaatinen3D) — a stylish storage and gift box that has an insert designed for this blaster!**

---

**Also check out the double barreled version — [AF2011 Pistol Keychain](https://than.gs/m/1441529?affiliateCode=Jaatinen3D)!**

---

&nbsp;

_The M1911 is a semi-automatic, single-action, recoil-operated pistol designed by John Browning and adopted by the U.S. military in 1911, renowned for its .45 ACP stopping power, reliability, and enduring use for over a century._

This little keychain sized functional single shot airsoft blaster, inspired by the Colt M1911, shoots 6mm plastic airsoft BBs and has a magazine that can store up to 4 BBs! The finely crafted details of this toy pistol come to life even with a 0.4mm nozzle.

This piece looks great in your keychain as well as being a fun toy and an addictive fidget slider & clicker!

&nbsp;

---

**Printing tips:**
No AMS required to make this multicolor, all the different colored parts are separate!

All the parts are already in the optimal orientation for printing!

The following parts require supports:
- _Frame_ — Tree/organic supports
- _Grip Rear_ — Normal supports
- _Hammer_ — Normal supports
- _Firing Pin_ — Tree/organic supports

I also recommend using brims for stability for _Slide_ and _Barrel_.

If you use Bambu Studio or OrcaSlicer, a handy print project file is included with the settings I used to print this!

&nbsp;

---

**Assembly:**
You'll need superglue and two small 5mm diameter springs 20-25mm long. A lighter is also recommended to more securely attach the _Slide Pin_.

See the included assembly video (listed above the promo pics)!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

M1911 Pistol Keychain — Functional Blaster Toy

---
📦Make sure to also check out the [Keychain Blaster Weapon Gift Crate](https://than.gs/m/1155174?affiliateCode=Jaatinen3D) — a nice storage and gift box that has an insert designed for this blaster!

---

&nbsp;

Mac-10 is already a compact firearm, and this keychain blaster toy version is even more so! But don't let the small size fool you, this beast boasts a lot of features!

- Detachable suppressor — shoots fine with or without!
- Magazine that holds 8 BBs!
- Stock that extends from inside the frame and the end moves down into position!
- Functional trigger instead of the bolt trigger mechanism of previous keychain blasters!


&nbsp;

---

**_Update 2025-03-13:_** Added a printable BB you can print if you don't have airsoft BBs!

---

&nbsp;

---

**Printing tips:**
All the parts are already in the optimal orientation for printing! None of the parts require supports, except I recommend some for the _Stock End_ for stability; it has a tendency to shift and break during printing the top part.

I also recommend a brim for stability for the _Magazine_.

If you use Bambu Studio or OrcaSlicer, a handy print project file is included with the settings I used to print this!

&nbsp;

---

**Assembly:**
You'll need superglue, a small 5mm diameter spring 20-25mm long, and one M3 bolt at least 10mm long. See the included assembly video!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

MAC-10 Keychain — Functional Blaster Toy

MAC-10 - Bambu Project.3mf

90x90x25mm memo pad box for laser cutting

3, 4, 5 & 6mm DXF as a combined net and as separate pieces

Cut with 85w Boxford laser at Nottinghack

3D-Printed Variations of this model: https://than.gs/m/990799

All uploaded laser designs: https://than.gs/c/83249

https://piledltd.co.uk/

Memo Pad Box Laser Cut DXF 3,4,5,6mm

PILEDlogo.step

_Is that a banana in you pocket or are you just happy to print Jaatinen3D's new keychain blaster?_

&nbsp;

---

**Printing tips:**
No supports needed! Parts are already oriented optimally. If you're using OrcaSlicer or Bambu Studio, there's a handy .3mf project file included with painted banana!

&nbsp;

---

**Assembly:**
You'll need superglue, a small 5mm diameter spring 15-25mm long and one M3 bolt at least 12mm long. See the included assembly video!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

6MM

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Barrett M82 Keychain — Functional Blaster Toy

AK-47 Keychain — Functional Blaster Toy

Glock Keychain — Functional Blaster Toy

Desert Eagle Keychain — Functional Blaster Toy

Glock Keychain V2 — Functional Blaster Toy

Kar98k Bolt-action Rifle Keychain — Functional Blaster Toy

Tickler Mini — Shell-ejecting airsoft blaster

AF2011 Pistol Keychain — Functional Blaster Toy

M1911 Pistol Keychain — Functional Blaster Toy

MAC-10 Keychain — Functional Blaster Toy

Memo Pad Box Laser Cut DXF 3,4,5,6mm

Banana Blaster Keychain — Functional Blaster Toy