This is the pattern for a hood to be either sewn directly onto an existing hoodie, or to be used as a standalone hood / cloak. I like using a powermesh for these prints to increase flexibility. 

The file contains 2 different sized diamond patterns for a hood. One hood will take 4 separate prints on a 256x256mm build plate.  My settings are saved in the 3mf file, with the pause included at the beginning of layer 2. You can also download the individual STL files and add your own parameters. I print with a .24mm layer height for a total of 3 layers.

Once the prints are finished, you'll have to trim away the excess fabric on one end fold over the opposite side's fabric to attach with UV resin, like the other design illustrated in the general printing guide. You'll then be able to use this as your pattern to cut out your base material of choice. Sew the two pieces, separately, right sides together and unfold. Place the sewed inner lining inside of the assembled 3D printed mesh hood, and sew along the base of hood before sewing along the sides. You can also sew this onto an existing hood, although hoodie sizes may vary.

Visit https://kaizen3dprints.com/products/magnetic-p-flat-300mm-x-300mm for magnetic PFLAT options to change up the holographic effects.


Diamond Hood

Diamond Hood V3.3mf

Part 1.stl

Part 2.stl

Part 3.stl

Part 4.stl

smaller diamond pattern hood part 1.stl

smaller diamond pattern hood part 2.stl

smaller diamond pattern hood part 3.stl

smaller diamond pattern hood part 4.stl

Hood negative modifier for other patterns.step

3dfabric

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Diamond Hood