Mando Coin

Coin_Mandalorian_mudhorn.stl

Spooky Demon Hand Tensegrity Shadow Box 3MF Painted - String Model

SPOOKY DEVIL DEMON HAND TENSEGRITY SHADOW BOX 3MF version for Bambu Studio- STRING MODEL PAINTED FOR BAMBULAB MMU
DESCRIPTION
This is the first of a Series of String Models I call the The Devil Hand Demon hand Tensegrity Shadow Box... Not only did I make the strings, I also made the frame look like an old picture frame to hang it on the wall.

Print at 0.2 layers, you must use Arachne wall generator OR thin wall detection for this to work.

When done you should have a hand reaching to greet you floating in space.

ENJOY.

Like and follow

PLEASE DO NOT SELL MY MODELS. IF YOU WANT TO SELL JOIN ME ON HERE IN THE MEMBERS AREA OR ON PATREON.

I love @3dprintbunny ... as a designer I have been trying to figure out how she does what she does for months. I finally have something that I am super proud of. SO PLEASE GO FOLLOW, LIKE AND SUPPORT HER TOO. She is a smart and talented modeler.



Starwars - LightSaber for Pool Noodle Sword Fights

Whole Light Saber for Thangs.stl

Laboon Sofvmates

Laboon Sofvmates.stl

XL Highland Cow (sitting)

XL Sitting highland cow.3mf

Fox V3 Keychain

BOB_Fox_V3_keychain.stl

Chameleon V2

BOB_ChameleonV2.stl

Bearded Dragon Fidget Keychain

Bob_Bearded_Dragon_Keychain.stl

 Love dragon in gift mode - including heart box

#23 Love dragon in gift mode - including heart box.stl

NES Controller Clicky Button Keychain Set

Select Start - Front.stl

Blastoise Skull - Hollow and Solid - Pokemon

Blastoise skull-Hollow.stl

The Ornamelt

Head.stl

Articulated Metagross (3mf included)

Metagross.stl

"Bitsy" the Flexi Jumping Spider

Peter Prints - Bitsy Flexi Jumping Spider v1.stl

Round-Eyed Bone Snake (Loose) - Articulated Snap-Flex Fidget

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

To unlock a jaw-dropping good time after printing, pinch the sides of the Round-Eyed Bone Snake's jaws together until they click and free up its cute little maw.

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the *Medium* tolerance model.  For the other tolerances, please check out the other versions of the model below:

Tight Tolerance Round-Eyed Bone Snake: https://than.gs/m/933819
Medium Tolerance Round-Eyed Bone Snake: https://than.gs/m/933823

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Round-Eyed Bone Snake, be sure to check out it’s sibling Sleek-Eyed Bone Snake:
Tight Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933810
Medium Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933820
Loose Tolerance Sleek Eyed Bone Snake: https://than.gs/m/933822


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


\

Most Popular Paid of All Time

Categories

Paid

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Mando Coin

Spooky Demon Hand Tensegrity Shadow Box 3MF Painted - String Model

Starwars - LightSaber for Pool Noodle Sword Fights

Laboon Sofvmates

XL Highland Cow (sitting)

Fox V3 Keychain

Chameleon V2

Bearded Dragon Fidget Keychain

Love dragon in gift mode - including heart box

NES Controller Clicky Button Keychain Set

Blastoise Skull - Hollow and Solid - Pokemon

The Ornamelt

Articulated Metagross (3mf included)

"Bitsy" the Flexi Jumping Spider

Round-Eyed Bone Snake (Loose) - Articulated Snap-Flex Fidget

Love Lizard

Forge Hammer - Handle for Bambu Lab printers

Crying Dragon Planter

Nude Vase for Original Home Decor

Cute Dragon