Origami Inspired Tree Ornament #4

Origami Inspired Tree Ornament #4.stl

Darth Vader Christmas Tree Decoration Upgraded

This is an upgraded version of [Darth Vader Christmas Tree Decoration](https://thangs.com/designer/frikarte3D/3d-model/Darth%20Vader%20Christmas%20Tree%20Decoration-547322?manualModelView=true). It's a diferent concept of the Darth Vader Mask.
It's designed to be printed in different color changes to achieve the final result, if you want you can print it in one color and paint later.
This is the filament color change configuration if you print with 0.2mm layer using Cura "Pause at Height":
0 to layer 13 (0 to 2.6mm) = White
14 to 17 (2.8 to 3.4mm) = Black
18 to 21 (3.6 to 4.2mm) = Red

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

Present Ball Holiday Themed Opening Pokeball - Fan Art

Present Ball Complete.stl

Nutcracker Gnome -Long Legs

LongLegsNutcrackerSTL_FunFam3D.stl

Standing Penguin Pencil Holder

standing_penguin_multicolor.stl

Candle Holders Set

Gracewindale-candle-holder-narrow-2cm.stl

Ornament fidget spinner

Ornament spinner.stl

Mini Dragon 01 (Christmas Edition)

Printzee_MiniDragon(Christmas).3mf

Mistletoe - Cookie Cutter with Stamp

Mistletoe - Cookie Cutter.stl

Christmas Teardrop Ornament 5

Use this version if you want to create your own supports. I recommend printing the version with built-in supports first.

Teardrop 2021 v9.1.stl

Cute Flexi Squirrel (Toy, Keychain), + Winter Edition

Flexi squirrel_Winter_Toy L.stl

Gyro Tree - Peek a Meow

catinchristmastree.stl

Christmas Tealight Ornament 2

Orn Body.3mf

Flexi Krampus

FlexiKrampus_Keychain_02.stl

Yeah, Another christmas Ball

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**ABOUT THE DESIGN**
Yep, this is yet another variation on my Christmas Balls with Integrated Stems. You can't keep a good designer down. There's no photo because my prototype is still printing. Still, it's 80% done and the rest is identical to other prints I;'ve published, so I already know it should work. Give it a try. It's relatively easy to print. 

**RESIZING**
This ornament should scale up well, but I'm not sure how much smaller you could print it using a consumer FDM printer. Using a resin printer, you could probably print it much smaller.

**PRINT TIME**
About 6 hours

**PRINT SETTINGS**
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 – 0.8 mm.

I had the best results using Cura setting the default width to 0.4 mm and adding custom settings for the main ball that printed it 0.8 mm thick. You can do this by adding a support blocker to the bottom and giving it custom settings of 0.4 mm. Cura adds the two and prints the area within the blocker at 0.8 mm.

*Infill*
These do not need any infill. JUST DON'T DO IT.

*Speed*
* Outer Wall: 35 mm/sec
* Inner Wall: 40 mm/sec
* Travel SpeeD: 60 mm/sec

*Build Plate Adhesion*
I used a brim. With the supports, you shouldn't need a raft.

*Supports*
You will probably need supports for both bed adhesion and the overhang on the first few layers. You shouldn't need supports for the loop at the top. Adding them would just increase the chances the supports broke and caused the print to fail. If you get supports inside the ball, just add a support blocker.

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 60 Degrees

,christmas

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Origami Inspired Tree Ornament #4

Darth Vader Christmas Tree Decoration Upgraded

Present Ball Holiday Themed Opening Pokeball - Fan Art

Nutcracker Gnome -Long Legs

Standing Penguin Pencil Holder

Candle Holders Set

Ornament fidget spinner

Mini Dragon 01 (Christmas Edition)

Mistletoe - Cookie Cutter with Stamp

Christmas Teardrop Ornament 5

Cute Flexi Squirrel (Toy, Keychain), + Winter Edition

Gyro Tree - Peek a Meow

Christmas Tealight Ornament 2

Flexi Krampus

Yeah, Another christmas Ball

FOLD BALL | 2-IN-1 CANDY HOLDER & ORNAMENT

MULTICOLOR CHRISTMAS CROCHET GIFT BOX Two Versions

Mari Lwyd (Pre-Supported)

Christmas Elf Cookie Cutter

Elf (Little Big Head)