Leg Lamp made from R2D2 head and C3PO leg remixed from files found through thangs search. (couldn't find the files I remixed from will add links when/ if I find them again (there are so many droid fil

This is a under side of shelf improvement of the previous cap removing assistive device for prescription bottles. This fits the human proof lids from Dillons (Kroger) and CVS lids and probably more. W

Needed a EDC bit driver with storage for a few bits. added a rule to. has both in line and right angle drives. recommend printing in PETG but to each their own. The driver was designed in FreeCAD and

A few days before (posting the files) on instagram saw something like this (clip in build and use video) https://youtu.be/2Wq_UWXgL0c someone made a one handed nail clipper attachment thing. Needing t

Calipers mm, 1/4in bit drive, sawzall blade slot, bit storage. works well enough and use the blank side to put my info as a business card that people might use and think of me.

Be Proud of who you are, and Show your Disability Pride. There are 2 options one a belt buckle one mountable on a your mobility aid or anything round about 20 to 35mm diameter. Us glitter and 5min epo

This is to help open all (That i could get hands on and test) pill (prescription and OTC) bottles with lids diameter between ~16mm-70mm, pop tops and a slide out foil breaker. I have mine mounted unde

loosely based on ridge like wallets but designed to be used with one hand (because I only have one). Have been using continuously for about 2 years. have 7 cards in it now and usually some cash under

This fits the most common type of bottle we get from dillons (kroger) Pharmacy. it is to improve leverage so disabled people may be able to better open there meds.

I needed a way to hold my sharpies i use to keep track of how many times I used my masks. This is what I came up with. Used double sided tape to stick it to my dash. Found it a great place to hang my

Using a laser tool during daylight can be a challenge to say the least the little red dot just disappears when in the sun and at a range much more than a small (4m) tape can handle. Because one of my

Our tiny dinosaur egg incubator was running way to dry. A quick trip to tinkercad (because it had a premade egg model) resulted in this wonderful object that, once stuffed with a paper towel and dippe

Got myself a Double edged razor sample pack and wanted something to keep the blades organised during the many test shaves to come. Printed in silk and the stringing caused some of the slots to not let

This device holds a sponge stationary in the overflow hole (22mm round) of our sink so I a one armed person can wash my grubbys (hands alternate). Looks like it will work well with initial tests, true

I have no idea how to best help the people of Ukraine. Right now I can wear my support for the world to see (and bleed). This is designed for the indents to be filled with paint or resin. Print on lon

i find zippers vary difficult with one hand. kept observing that i would use my fingers to push the bottom of the coat down and pull the zip up with index and thumb. a better grip for fingers to push

Our tiny dinosaur egg incubator was running way to dry. A quick trip to tinkercad (because it had a premade egg model) resulted in this wonderful object that, once stuffed with a paper towel and dippe

Space man spiffs favorite Blaster. built on a rubber band gun that didn't work that good but the Mertl ray is a great cosplay or kids blaster, there is space in body for small sound system i haven't g

Let the every one know where you stand on masked kidnappers and extra judicial executioners. PLA works well for buckles but PETG is better. print on edge with support. I used acrylic paint but 5 minu

Working Belt Buckle, The blank buckle can be sanded vary fine and works well as a wet erase. Epoxy 1.75mm filament into the holes passing through the buckle to reinforce. Use wire to make attachment t

Working Belt Buckle, The blank buckle can be sanded vary fine and works well as a wet erase. Epoxy 1.75mm filament into the holes passing through the buckle to reinforce. Use wire to make attachment t

Mason jar lid with slot for used razors and razor stand.

Working Belt Buckle, The blank buckle can be sanded vary fine and works well as a wet erase. Epoxy 1.75mm filament into the holes passing through the buckle to reinforce. Use wire to make attachment t

The temperature control knob on my incubator was just a ~6mm stick and was hard to control. this design just presses onto the ~6mm shaft using a tapered internal fit. Is now much easier to adjust temp

Got my grubbys on a west German PeliKan M150 fountain pen. But it was Busted the plastic Nut thing that draws the plunger/ ink into the pen was nonfunctional. Some CAD, Printer cleaning of crusty ink

One handed RC plane controller, 3 channel so bank and yank it. used trigger from rc car and joy stick from game controller for my pots. See video https://www.youtube.com/watch?v=IzirbA9b5tA&list=PLgHf

Working Belt Buckle, The blank buckle can be sanded vary fine and works well as a wet erase. Epoxy 1.75mm filament into the holes passing through the buckle to reinforce. Use wire to make attachment t

my accessible designs are kept free, and i ask that you print them for yourself and those in need without profit in mind. disabled people don't need more disability tax. brooms are difficult with one

This case fits (snaps) over the cheap case that came with the galaxy s10e. some times we all need to reference our copy of the hitch hikers guide to the galaxy. this case and its iterations have sav

my accessible designs are kept free, and i ask that you print them for yourself and those in need without profit in mind. disabled people don't need more disability tax. brooms are difficult with one

my accessible designs are kept free, and i ask that you print them for yourself and those in need without profit in mind. disabled people don't need more disability tax. brooms are difficult with one

Working Belt Buckle, The blank buckle can be sanded vary fine and works well as a wet erase. Epoxy 1.75mm filament into the holes passing through the buckle to reinforce. Use wire to make attachment t

alpha testing please provide feedback. this should fit 2.2 in and 1.8 in dia suction cups that slot into things. this is the suction cup link i was sent to model from https://www.amazon.com/dp/B0BV9F7

before combines these were used to separate gran from the plant. now there mostly decor and a school mascot. this one can hold your business cards. check this out to get a crash coerce in threshing st

replacement gears for bachman pancake drives that split. you will need a strong resin for this to prevent teeth from stripping.

the cable pull device (keeper) on my 1960s fairway flier broke so after reverse engineering it and the rest of the plastic i got this to work well. i recommend petg or better for the material and run

just discover this and thought id make one domesticated. hahahahahaa https://www.horg.com/horg/

Show your support for the Palestinian people. PLA works well for buckles but PETG is better. print on edge with support. fill in with 5 minute epoxy and fine glitter. acrylic paint works but doesn't

i made this to show my support of the Minnesota people being targeted by ICE. print in white so the star is white after coloring the other parts. PLA works well for buckles but PETG is better. print