NackHabitat #0087 - Keychron Q8 Max Wrist Wrest

For printing whole or dovetail yourself: Part A - 0087pAv1_Keychron Q8 Max Wrist Rest, Whole (3.6.2025)

For printing in halves, pre-dovetailed: Part B - 0087pBv1_Keychron Q8 Max Wrist Rest, Left (3.6.2025) Part C - 0087pCv1_Keychron Q8 Max Wrist Rest, Right (3.6.2025)

This was a super quick design and print in a single day using a little photogrammetry and a couple of guesses on measurements. All things considered I think it's pretty solid!

I've uploaded the .STEP of both the whole and the pre-dovetailed in case you wanted to tweak it at all. I made the dovetail a little on the loose side but it could be glued if you wanted. I've kept it not-glued and it's been great so far. Printed with Polychroma Celestial Purple which I think has a nice texture at .16mm.

If you want to dovetail yourself, use the whole version. If you just want to print in halves, just use the .3mf I uploaded.

Use either of these for the underside so it doesn't slip around easy. [affiliate links]

• Non Slip Self Adhesive Silicone Cuttable Furniture Pads 4x40 inch
• Clear Adhesive Bumper Pads Combo Pack

OPTIONAL

• Polymaker Panchroma Celestial Purple
• Bob Smith Industries Maxi-Cure CA Glue