_-_Medium_Command_Strip_Mount.png&w=256&q=75)
6.25 mm - Horizontal Dual Snaps (DS Part A) - Medium Command Strip Mount
This is a "Medium" Command Strip Mount that works best with 3M Medium Picture Hanging Command Strips and creates a 6.25mm offset from the surface.
If your Tiles are smaller than a 6x6, then use the Small Command Strip Mounts.
This is a "Part A" piece and attaches to two Part B Snaps.
Learn more about this part at https://multiboard.io/knowledge-hub
Printing Guidelines:
Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and not supports. Apart from that, use yourprinter'ss default settings.
The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.
For more information about printer settings, click here.
This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts, for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io
6.25 mm - Horizontal Dual Snaps (DS Part A) - Medium Command Strip Mount
Fix Point to Countersink Adapter
Flush - Small Hole Center Marking Tool
6.25 Offset - Small Hole Center Marking Tool
12.5 Offset - Small Hole Center Marking Tool
2x6 MU - Right Support End - Modular Bolt-Locked Shelf
4x8 MU - Center - Modular Bolt-Locked Shelf
2x2 MU - Right Support End - Modular Bolt-Locked Shelf
2x6 MU - Left Support End - Modular Bolt-Locked Shelf
8x8 MU - Center - Modular Bolt-Locked Shelf
2x4 MU - Right Support End - Modular Bolt-Locked Shelf
4x6 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Left Support End - Modular Bolt-Locked Shelf
2x2 MU - Left Support End - Modular Bolt-Locked Shelf
8x2 MU - Center - Modular Bolt-Locked Shelf
8x4 MU - Center - Modular Bolt-Locked Shelf
2x4 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Right Support End - Modular Bolt-Locked Shelf
8x6 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Center Support - Modular Bolt-Locked Shelf
what happened to the 8mm offset ones? I couldn't find it anywhere.
Does anyone have an inside tip on how to improve the Command strips adhesion to these? I've had four snaps separate from the strips.
These appear to be 4mm not 8.
The description says:
I wanted to remix a Mounting Snap Part A to a hook so that I can hang a small multiboard on my desk divider at work without having to make holes in the divider/wall. I took this part instead by mistake, and after printing it I see that the difference to the piece I meant to take is that this one does not have a hole in the middle but it also have a small angle/fading between the snap to the base on one side. What is the purpose of that?