The source image for this one was generously provided by metaprints3D and I thought it would be an awesome one - and it did not disappoint!

The 3MF file has the filament swaps already coded in. If you're not using Bambu, use the STL, and follow the print instructions below!

Print Instructions Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

Filaments Used:

• PLA Kingroon Black Transmission Distance: 0.4
• PLA Sunlu Purple Transmission Distance: 6
• PLA CC3D Blue Gray Transmission Distance: 3
• PLA Kingroon White Transmission Distance: 8
• PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:

• Start with Black
• At 0.68mm swap to Purple
• At 1.16mm swap to Blue Gray
• At 1.32mm swap to White
• At 1.64mm swap to Jade White for the rest.

If you'd like to support me, you can now subscribe to a Thangs membership plan!

Joining will give you access to a private discord, all paid models, as well as a commercial license to sell the physical prints of my models.

If a Thangs Membership is not your thing, I also have a Patreon that gives you the same perks!