JBL Tune 500BT headphone travel case

M3x30 screw and nut is fot the lid and latch mechanism. M3x25 is for lid hinge. Lid hinge should be tapped M3 thread before assembly. ( It is not necessary, screw shoud tab the thread when is screwed but this make it much easier)

Material: PLA, PET-G Layer high: 0,3 or lower. I changed layer high to 0,15 on hinges only. Support needed. Hardware: 1xM3x30mm Socket head screw 2xM3x25mm Socket head screw 1xM3 nylon lock nut