Pistol Crossbow Bolts, 6.3 and 6.5 inch
148 downloads · 3 years ago · Printable crossbow bolts for small pistol crossbows such as the Adderini. They are 6.3 and 6.5 inche
Printable crossbow bolts for small pistol crossbows such as the Adderini. They are 6.3 and 6.5 inches in length.
These bolts work okay for target practice, although not with the best accuracy.
Assuming normal target blocks are used, the tips should be fairly durable and last a while.
They do not require any supports but do need a 10 mm wide brim as they are best printed straight up and down. For material I would use PLA+, Nylon CF, or PC. I also recommend printing on 100% infill.
At some point I will likely revise these to fit metal tips when I can find some for ¼ inch diameter bolts.
DDD Crossbow Pistol Decoration Split
Hand Crossbow 3D-print
"Micro Raptor" Reverse Draw X-Bow
Sliding Legolini - Pump-Action Repeating Mini Bow
Nerfslinger X-Bow || Print-in-Place
There Are Some Secrets Which Do Not Permit Themselves to Be Told - A LanternLore Collab
Owlbert Einstein - A LanternLore Collab
Omega's energy crossbow - Bad Batch
Shipto you
SHADO Interceptor
Omega’s energy crossbow – Bad Batch
Shipto you
Saab J-35 Draken
Solar Post Lantern
Shipto you
Yakovlev Yak-6 Crib
Shipto you
Myasishchev M-4 Bison
SlingshotPistol v27.3mf
Brutus' Third Blaster - Skeleton Crew
Helldivers 2 PLAS-15 Loyalist Pistol Sidearm Replica Prop Cosplay 3D print printable
Stormchunker - FREE Star Wars Stormtrooper Kit | No Supports, No AMS, No Glue
Frankenchunk's Monster - FREE Frankenstein Kit | No Supports, No AMS, No Glue
