Stardust Designs4 followers

Bambu Lab P1P / X1 Build Plate Locker #ThangsBambuContest 3d model

Bambu Lab P1P / X1 Build Plate Locker #ThangsBambuContest

73 downloads · 3 years ago · I designed this locker for the Bambu Lab P1P and X1 to store spare build plates for the print queue.

This model is restricted by licensing terms.

View license.

Description

I designed this locker for the Bambu Lab P1P and X1 to store spare build plates for the print queue. It can hold up to six plates fully enclosed. The door and front frame feature slots for optional 8mm x 3mm x 1mm magnets for a satisfying seal. The locker consists of eight models that can be printed by the P1P or X1 in four plates without supports and assembled without glue.

Designed and rendered in Shapr3D. I’m eager to see what improvements/changes others might have! I have a few of my own I hope to share here soon.

#ThangsBambuContest

Tags:

Discussions

techdo3 years ago

I had a couple issues printing this. The brackets for the the door has gaps on the top and bottom, the sides are shorter than the front and back, leaving gaps at the top. And it is slightly too short for the plates, causing them to bend when inserted. The latter could be fixed by sinking the groves down by a couple mm. Also, it would help if the opening had a chamfer on the top and bottom to make it a little easier to put the plates in. All in all I like the design and what you were going for.