RetroMaker2.7K followers

Follow

Snow Globe Votive Ornament - Winter Cabin 3d model

Snow Globe Votive Ornament - Winter Cabin 3d model

Snow Globe Votive Ornament - Winter Cabin 3d model

Snow Globe Votive Ornament - Winter Cabin - Eryone Metallic Copper PLA - 3d model

Snow Globe Votive Ornament - Winter Cabin 3d model

Snow Globe Votive Ornament - Winter Cabin

7.5K downloads · 4 years ago · Snow Globe Votive Ornament - Winter Cabin Insert an LED tea light candle (<38mm dia) in the base to

This model is restricted by licensing terms.

View license.

Snow Globe Votive Ornament - Winter Cabin

Insert an LED tea light candle (<38mm dia) in the base to light up the cabin.

Print in place with no supports needed. Brim build plate support recommended.

Updated V2. - Fixed deer antlers and smoke. Updated V3. - Fixed Cabin

Creative Commons License BY-NC-ND 4.0

Tags:

Community Makes (29)

Made this for my mom for Christmas. My fiance designed a base that fits up in side it. That's where I put the lights!! I also blew it way up.

Make by user

Make by user

Make by user

Chimney broke off the roof only a layer or 2 before it was going to connect with the top part of the globe and reinforce it :( :( -- about 14 hours into print.. I tried to superglue, and modified the gcode to resume at that layer, but the superglue didn't hold up and broke again.. So bummed, this was gonna look so cook in clear PLA :(

Make by user

Make by user

Make by user

Make by user

Make by user

Make by user

Make by user

Geeetech Multicolor Glow in the dark PLA

Printed in Gizmodorks Glow in the dark PLA

Snowball ornament

Make by user

Make by user

Make by user

Make by user

Make by user

Make by user

Beautiful print in Capricorn night sky

Make by user

Printed beautifully!!! A tip to all of you who have had trouble with the smoke breaking off. I printed the model without Z-hop all the way up to the smoke stack then added Z-hop 0,5mm the rest of the way up. That way the nozzle won't hit the print when moving. I'm using Cura 5.5 and there is a way to add Z-hop later in the model under Extensions/Post Processing/Modify G-Code/Alter Z-hops layer-to-layer. You have to add it manually just following this link.

https://github.com/Ultimaker/Cura/issues/15280

purple color used for my granddaughter

there is e gab between cabin and roof , print vailure

Amolen blue rainbow on Sovol SV06 0.15mm.

The bottom lid from the side.

Made this for my mom for Christmas. My fiance designed a base that fits up in side it. That's where I put the lights!! I also blew it way up.

Make by user

Make by user

Make by user

Chimney broke off the roof only a layer or 2 before it was going to connect with the top part of the globe and reinforce it :( :( -- about 14 hours into print.. I tried to superglue, and modified the gcode to resume at that layer, but the superglue didn't hold up and broke again.. So bummed, this was gonna look so cook in clear PLA :(

Make by user

Make by user

Make by user

Make by user

Make by user

Make by user

Make by user

Geeetech Multicolor Glow in the dark PLA

Printed in Gizmodorks Glow in the dark PLA

Snowball ornament

Make by user

Make by user

Make by user

Make by user

Make by user

Make by user

Beautiful print in Capricorn night sky

Make by user

Printed beautifully!!! A tip to all of you who have had trouble with the smoke breaking off. I printed the model without Z-hop all the way up to the smoke stack then added Z-hop 0,5mm the rest of the way up. That way the nozzle won't hit the print when moving. I'm using Cura 5.5 and there is a way to add Z-hop later in the model under Extensions/Post Processing/Modify G-Code/Alter Z-hops layer-to-layer. You have to add it manually just following this link.

https://github.com/Ultimaker/Cura/issues/15280

purple color used for my granddaughter

there is e gab between cabin and roof , print vailure

Amolen blue rainbow on Sovol SV06 0.15mm.

The bottom lid from the side.

Community Makes (29)

Made this for my mom for Christmas. My fiance designed a base that fits up in side it. That's where I put the lights!! I also blew it way up.

Make by user

Make by user

Make by user

Chimney broke off the roof only a layer or 2 before it was going to connect with the top part of the globe and reinforce it :( :( -- about 14 hours into print.. I tried to superglue, and modified the gcode to resume at that layer, but the superglue didn't hold up and broke again.. So bummed, this was gonna look so cook in clear PLA :(

Make by user

Make by user

Make by user

Make by user

Make by user

Make by user

Make by user

Geeetech Multicolor Glow in the dark PLA

Printed in Gizmodorks Glow in the dark PLA

Snowball ornament

Make by user

Make by user

Make by user

Make by user

Make by user

Make by user

Beautiful print in Capricorn night sky

Make by user

Printed beautifully!!! A tip to all of you who have had trouble with the smoke breaking off. I printed the model without Z-hop all the way up to the smoke stack then added Z-hop 0,5mm the rest of the way up. That way the nozzle won't hit the print when moving. I'm using Cura 5.5 and there is a way to add Z-hop later in the model under Extensions/Post Processing/Modify G-Code/Alter Z-hops layer-to-layer. You have to add it manually just following this link.

https://github.com/Ultimaker/Cura/issues/15280

purple color used for my granddaughter

there is e gab between cabin and roof , print vailure

Amolen blue rainbow on Sovol SV06 0.15mm.

The bottom lid from the side.

Made this for my mom for Christmas. My fiance designed a base that fits up in side it. That's where I put the lights!! I also blew it way up.

Make by user

Make by user

Make by user

Chimney broke off the roof only a layer or 2 before it was going to connect with the top part of the globe and reinforce it :( :( -- about 14 hours into print.. I tried to superglue, and modified the gcode to resume at that layer, but the superglue didn't hold up and broke again.. So bummed, this was gonna look so cook in clear PLA :(

Make by user

Make by user

Make by user

Make by user

Make by user

Make by user

Make by user

Geeetech Multicolor Glow in the dark PLA

Printed in Gizmodorks Glow in the dark PLA

Snowball ornament

Make by user

Make by user

Make by user

Make by user

Make by user

Make by user

Beautiful print in Capricorn night sky

Make by user

Printed beautifully!!! A tip to all of you who have had trouble with the smoke breaking off. I printed the model without Z-hop all the way up to the smoke stack then added Z-hop 0,5mm the rest of the way up. That way the nozzle won't hit the print when moving. I'm using Cura 5.5 and there is a way to add Z-hop later in the model under Extensions/Post Processing/Modify G-Code/Alter Z-hops layer-to-layer. You have to add it manually just following this link.

https://github.com/Ultimaker/Cura/issues/15280

purple color used for my granddaughter

there is e gab between cabin and roof , print vailure

Amolen blue rainbow on Sovol SV06 0.15mm.

The bottom lid from the side.

Discussions

PiNK_3DP2 years ago

3d model

GrizzledGnome3 years ago

Beautiful print in Capricorn night sky

Beautiful print in Capricorn night sky 3d model

3d model

frikarte3D2 years ago

Geeetech Multicolor Glow in the dark PLA

Geeetech Multicolor Glow in the dark PLA 3d model

Eriks Tinkering Workshop3 years ago

3d model

3d model

ShowtimeDesignz2 years ago

3d model

gilcher3 years ago

I lost the star on the top, but all in all they came out good. Printed on Bambu X1C with Hatchbox transparent red as the main color, Bambu white, red, green, brown, black, gray and a generic brand silk gold. Only took 2 days lol

jimmypekkala3 years ago

3d model

3d model

3d model

3d model

3d model

3d model

3d model

3d model

TitansRevenge2 years ago

3d model

3d model

3d model

3d model

jkhansson3 years ago

3d model

3d model

3d model

HEAVY2 years ago

3d model

View all 49 discussions

Snow Globe Votive Ornament - Winter Cabin

7.5K downloads · 4 years ago in

Lamps & Lighting

and

Sculptures & Statues

RetroMaker2.7K followers

Follow

This model is restricted by licensing terms.

View license.

More models

HO Scale - Gabinetti Building 3d model

HO Scale - Gabinetti Building

Shipto you

HO Scale - Water Tower 3d model

HO Scale - Water Tower

Shipto you

HO scale - Shepherd's Carriage 3d model

HO scale - Shepherd's Carriage

Shipto you

HO Scale - Gypsy Caravan 3d model

HO Scale - Gypsy Caravan

HO Scale - Cabina di Telefonica 3d model

HO Scale - Cabina di Telefonica

HO Scale - Water Column 3d model

HO Scale - Water Column

HO Scale - Kiosk 3d model

HO Scale - Kiosk

Shipto you

HO Scale - Piaggio L'Ape 125A - Cargo Set 3d model

HO Scale - Piaggio L'Ape 125A - Cargo Set

Shipto you

HO Scale - Piaggio L'Ape 125A Open Cargo Truck 3d model

HO Scale - Piaggio L'Ape 125A Open Cargo Truck

Italian Stone Villa 3x2x2 - HO Scale 3d model

Italian Stone Villa 3x2x2 - HO Scale

Art Deco Gas Station - HO Scale 3d model

Art Deco Gas Station - HO Scale

1/6 Scale Keyboard with Adjustable Stand 3d model

1/6 Scale Keyboard with Adjustable Stand

Mini DJ Mixer - 1/6 Scale 3d model

Mini DJ Mixer - 1/6 Scale

1939 Bluetooth Radio 3d model

1939 Bluetooth Radio

Piaggio Ape A125 Scale Models 3d model

Piaggio Ape A125 Scale Models

Italian Kiosk Scale Models 3d model

Italian Kiosk Scale Models

T-Shirt - Keep on Truckin' 3d model

T-Shirt - Keep on Truckin'

Showcase Podium - The Price is Right 3d model

Showcase Podium - The Price is Right

4th Dr. Who HueForge 1967 Retro TV Screen 3d model

4th Dr. Who HueForge 1967 Retro TV Screen

1967 Retro TV Magnet 3d model

1967 Retro TV Magnet