A spinning toy top designed from scratch around a star theme so that it could be printed in multiple colors to resemble the American flag.

Not for commercial use. Please see license agreement.

The top is one piece. Details on which layers to print which color are included in the instructions.

The top is available with and without built-in supports. I have always printed it with the supports.

PRINT SETTINGS

• Layer Height: 0.15mm
• Wall Thickness: 2.0mm
• Bottom & Top Thickness: 1.2mm
• Outer Wall Before Inner: Yes
• Infill: 15%
• Infill Pattern: Grid
• Print Temperature: 190
• Build Plate Temperature: 60
• Speed: 60mm
• Wall Speed: 40mm
• Support Speed: 30mm
• Travel Speed: 100mm
• Support Structure: Normal
• Support Placement: Touching Buildplate
• Support Overhang Angle: 60
• Support Pattern: Concentric
• Support Density: 15
• Support Roof Density: 75%
• Support Floor Density: 75%
• Build Plate Adhesion: Raft

If you print with my settings and want to replicate my design, here are the layer colors:

1 - 47 White 48 - 67 Blue 68 - 87 Red 88 - 107 White 108 - 127 Red 128 - 147 Blue 148 - 195 White 196 - 402 Red