A mold to create some rubber feet for the bear 2.1 frame. I used the TFC silicone by TROLLFACTORY

Mixing ratio: 40g component A 40g component B 3,6G black pigments

The original screws doesn't work with the screws anymore because of the original feet are designed to use only a little material to bolt them on the frame. I use M5x16cm screws.

For screwing the mold together 6 M3x20cm screws + nuts are needed.

Links to the things i used are in cnc kitchens video: https://www.youtube.com/watch?v=O5UiXky85hA