DigitalDigital Store
Bundle
PrintsPrint Store
My Thangs
Access 15,000+ models$14.99/month
DigitalDigital Store
Bundle
PrintsPrint Store
My Thangs
Access 15,000+ models$14.99/month
David F
DrDflo879 followers
Follow
DrDflo
DrDflo
|
|
Image 1 of 3
Low-Profile Sliding Right Angle Jig - Sliding right angle jig allows for the stock material to be held square to the work table. The long slots allow for the clamp to be adjusted such that the stock material is pressed up against the low-profile clamps (eft) - 3d model
DrDflo
DrDflo
|
|
Image 1 of 3
Low-Profile Sliding Right Angle Jig - Sliding right angle jig allows for the stock material to be held square to the work table. The long slots allow for the clamp to be adjusted such that the stock material is pressed up against the low-profile clamps (eft) - 3d model
Low-Profile Sliding Right Angle Jig - Sliding right angle jig allows for the stock material to be held square to the work table. The long slots allow for the clamp to be adjusted such that the stock material is pressed up against the low-profile clamps (eft) - 3d model
Low-Profile Sliding Right Angle Jig - Sliding clamp is 1/4" thick and can be used for wasteboards with a hole spacing of 10 or 25mm spacing - 3d model
Low-Profile Sliding Right Angle Jig 3d model

Low-Profile Sliding Right Angle Jig

69 downloads · 5 years ago · This jig is designed to be used with the ultra low-profile clamp. Before the bolts are tightened, th
This model is restricted by licensing terms. 
View license.
Description

This jig is designed to be used with the ultra low-profile clamp. Before the bolts are tightened, the jig can be slid to force the stock material up against the face of the low profile clamps. This makes the most out of the small 1.5mm travel of the ultra low-profile clamps.

This jig is for use with CNC routers that have wasteboards/tables with M5 threaded inserts, like these: https://amzn.to/3wUoazT or aluminum extrusion with T-nuts. This jig will work for hole spacings of 10, 25, 50mm.

Dimensions: 175mm x 175mm

3D Printing Parameters: 30% Infill

Check out this video see my 3D printed work holding in action: https://youtu.be/cU-LR5Mn9fY

Discussions

Low-Profile Sliding Right Angle Jig

69 downloads · 5 years ago in 
Tools
David F
DrDflo879 followers
Follow
This model is restricted by licensing terms. 
View license.

More models

DrDflo
DrDflo
Ultra Low-Profile Clamp - Ultra low-profile clamps gripping the edge of a 1/2" stock material. The sliding right angle clamp (right) allows for the material to be pressed up against the clamps before tightening them down. This makes the most out of 1.5mm travel - 3d model

Ultra Low-Profile Clamp

cantwisted
cantwisted
Poop Catcher for Creality K2 Plus – Mag Mount, Low-Profile 3d model

Poop Catcher for Creality K2 Plus – Mag Mount, Low-Profile

Yumi Raven
Yumi Raven
Gridfinity Low-Profile Bins for 47×38 cm Base 3d model

Gridfinity Low-Profile Bins for 47×38 cm Base

M
megamaking
East3D Gecko Low-Profile Front Panel Screen Bezel 3d model

East3D Gecko Low-Profile Front Panel Screen Bezel

LeatherLupo
LeatherLupo
Low-Profile MiniBit Wrench for confined spaces - car blend door etc. 3d model

Low-Profile MiniBit Wrench for confined spaces - car blend door etc.

DrDflo
DrDflo
Right Angle Jig for CNC Router - The universal right angle jig works for a variety of m5 hole spacings and is a must off for CNC router work. It can be used to ensure that the stock material is square to the table and be used as a backstop for toe clamps. - 3d model

Right Angle Jig for CNC Router

Ash_Slash
Ash_Slash
Low-Profile Gridfinity Modular Base (Overhang) 3d model

Low-Profile Gridfinity Modular Base (Overhang)

ZackFreedman
ZackFreedman
CNC Bit Tube Holder, Low-Profile 3d model

CNC Bit Tube Holder, Low-Profile

Mac56k
Mac56k
Low-Profile Road Marker | Scooter Accesory 3d model

Low-Profile Road Marker | Scooter Accesory

A
aaddff
Low-Profile Springfield Armory SA-XD9 Holster Ambidextrous 3d model

Low-Profile Springfield Armory SA-XD9 Holster Ambidextrous

3ngineeredmodern
3ngineeredmodern
AXIS Right Angle Corner Clamp Jig, Model 850, v01 3d model

AXIS Right Angle Corner Clamp Jig, Model 850, v01

3ngineeredmodern
3ngineeredmodern
AXIS Right Angle Corner Clamp Jig, Model 700, v01 3d model

AXIS Right Angle Corner Clamp Jig, Model 700, v01

jzfranck
jzfranck
5x3 - Low Profile Bolt-Locked Bracket Angled For Shoes 3d model

5x3 - Low Profile Bolt-Locked Bracket Angled For Shoes

thatguysoto
thatguysoto
Low Profile Packout Receiver 3d model

Low Profile Packout Receiver

straydawn
straydawn
Minimalist Sponge Tray – Low Profile 3d model

Minimalist Sponge Tray – Low Profile

Skylake Labs
Skylake Labs
Gaggia Classis Pro - Low Profile Drip Tray 3d model

Gaggia Classis Pro - Low Profile Drip Tray

A1 Tools
A1 Tools
Milwaukee C12 RAD 12 V Right‑Angle Drill/Driver 3d model

Milwaukee C12 RAD 12 V Right‑Angle Drill/Driver

threeministudios
threeministudios
Double drawer organizer (low profile) 3d model

Double drawer organizer (low profile)

DrDflo
DrDflo
Low Profile Toe Clamp for CNC Router (Hex Nut Version) - This cutting board if firmly held by two toe clamps pressing the board into the right-angle jig. The entire top of the cutting board can be faced/carved without running over a clamp. - 3d model

Low Profile Toe Clamp for CNC Router (Hex Nut Version)

DrDflo
DrDflo
Low Profile Toe Clamp for CNC Router (Heat-Set Insert Version) - This cutting board if firmly held by two toe clamps pressing the board into the right-angle jig. The entire top of the cutting board can be faced/carved without running over a clamp. - 3d model

Low Profile Toe Clamp for CNC Router (Heat-Set Insert Version)