Miguel is a 3D printable table lamp and our second design with a top shade cover. We used an infill pattern that complements our signature RippleMesh texture.

What's included • The Miguel Lamp with our signature RippleMesh texture • A step-by-step instruction file to help you replicate the result shown in the photos

Model dimensions Based on how the model is positioned on the print bed: • Shade: X: 191.12 / Y: 191.12 / Z: 131.40 • Shade Lid: X: 189.10 / Y: 189.10 / Z: 6.00 • Base: X: 117.21 / Y: 117.21 / Z: 102.60 • Base Lid: X: 89.60 / Y: 89.60 / Z: 6.80

Recommended slicers • Bambu Studio or PrusaSlicer

What you'll need to print • 0.4 mm or 0.8 mm nozzle (for the shade) • PLA or PETG

What you'll need to assemble • E27 screw socket with two nuts — see photos for reference

Safety note • If you’re using PLA, the bulb must be a low-consumption LED. We also recommend this type of bulb if you’re using PETG • Always turn off the power before any installation

Related Models* Michelle Table Lamp