I designed this lamp to bring a touch of architecture feel to my room by adding this intricate texture to the outside of the lamp. Printing it in Translucent Black PETG from Kexcelled to give it it's unique glow.

Designed for a Bambu LED Puck Light!

Print Settings

Shade

• Nozzle Size - 0.6mm (You can do a 0.4mm, the layers just tend to typically offer less light passage and require running the standard 0.2 profile but with the same slowed speeds)
• Line Width ALL SETTINGS: 0.5mm
• Layer Height: 0.3mm
• Walls: 2
• Infill: 15%
• Bottom Solid Layers: 10
• Speed: 25mm/s on all walls and infill

Base

• Nozzle Size: 0.4mm or 0.6mm - I used a 0.4mm
• Seam: Back
• Standard Line Width
• Layer Height: 0.16mm Optimial
• Walls: 3
• Infill: 10%
• Support: Yes (Very Minimal Just for Twist to Lock Feature)

If you have any questions, drop them below or DM me on IG!

Check out the rest of my designs and get a Commercial Sales License Here