LAMP TO ANOTHER DIMENSION (STRANGER LAMP) - LAMP KIT LAMP / DESIGNER LAMP / MODERN HOMEDECOR
- Follow us on Instagram (sektor7_studios_3d)
A COMMERCIAL LICENSE IS AVAILABLE HERE ON THANGS: https://thangs.com/designer/Sektor%207%20Studios/memberships (this included our premium models & free models)
Support us on Thangs to access exclusive content and be the first to see our new projects. Your support enables us to keep creating innovative and practical designs for makers everywhere. You also find there a commercial license
- You can also join us on Patreon
LAMP TO ANOTHER DIMENSION (STRANGER LAMP) - LAMP KIT LAMP 💡
Our new Lamp to Another Dimension, also known as the "Stranger Lamp", is now available!
The design was inspired by the mysterious connection between two parallel worlds in Stranger Things. The illuminated centerpiece resembles a gateway or wormhole stretching between dimensions—as if our world and the Upside Down were merging.
The lamp works beautifully with a classic warm-white LED, but we have also linked a multicolor lamp kit in the Amazon options below. The different colors create an especially dramatic dimensional effect and give the lamp an entirely new atmosphere!
The model is designed for easy printing and assembly and is compatible with the Bambu Lab LED Lamp Kit 001 and equivalent lamp kits.
Where to buy the required lamp kit:
Amazon:
Official Bambu Lab Store: https://eu.store.bambulab.com/de/products/led-lamp-kit-001?id=47895571595612
PLEASE BE CAREFUL WHEN REMOVING THE LAMPSHADE FROM THE PRINTPLATE!
3MF-FILE ATTACHED WITH ALL THE SETTINGS!
RECOMMENDED PRINT SETTINGS:
- Filament: Bambulab PLA Matte black,white (used in our makes)
- Infill: 8% Gyroid or Grid
- Layer Height: 0.2mm
- Walls: 2
- Nozzle Size: 0.4mm
- Support Structure: needed
- Brim: None needed, but when you have adhesion problems than activate the brim
- Skirt loop: 1
RECOMMEND PRINT-SETTINGS (LAMPSHADE) (Activate the Vasemode!)
- Filament: Bambulab PLA Matte white (used in our make)
- Infill: 0% Gyroid or Grid (Vasemode)
- Layer Height: 0.2mm
- Walls: 1 (Vasemode)
- Nozzle Size: 0.4mm
- Support Structure: None needed, ensuring a hassle-free printing process.
- Brim: None needed, but when you have adhesion problems than activate the brim
- Vasemode Settings (Settings --> Other --> Spiral vase): Activate
Support us on Thangs to access exclusive content and be the first to see our new projects. Your support enables us to keep creating innovative and practical designs for makers everywhere. You also find there a commercial license
You can also join us on Patreon: https://www.patreon.com/c/sektor7_studios
Greetings
Leon from Sektor 7 Studios

































