💀 King Dracula — a regal skull bust crowned in gothic detail, assembled with hidden magnets. Easy to snap together, but you still have to work out where each part belongs. Equal parts display piece and magnetic puzzle.

What you get → 12 print-in-parts pieces What you need → 24 neodymium magnets, 6×3 mm (NOT included — purchase separately)

📐 About the model – Detailed skull bust with ornate crown – Approx. 87 × 60 × 98 mm – Splits into 12 parts to fit small print beds – A quick, satisfying build — display piece more than hard brain teaser – Gothic / horror aesthetic

🧲 Magnet instructions – Each mating face has alignment guides: two small bumps mark the magnet spots, paired with two recesses on the facing piece. – Insert every magnet the same way relative to the bumps/recesses. – Following the guides keeps polarity consistent across all joints, so every part attracts correctly. – Press-fit into the pockets — snug fit, no glue required (optional for a permanent build).

🖨️ 3D printing settings – 0.2 mm layer height – 5%–10% infill – Supports REQUIRED (crown spikes and overhangs) – Tested with PLA

⚙️ Tip: test-print a couple of magnet pockets before the full build.

📥 Digital product: download instantly after purchase. No physical item is shipped.

Good to know: Magnets NOT included (24 magnets 6×3 mm); No glue required (optional for permanent build); Do NOT scale the model (magnet holes won't fit 6×3 mm magnets); Mind magnet polarity while inserting; Print WITH supports for crown and overhangs.

Happy printing! 💀