For the Dryft Pendant Lamp, we used a new Grasshopper script. The design features a series of radial concave and convex arches with soft edges. It's a simple model that's easy to sell.

What’s included • The Dryft Pendant Lamp • A step-by-step instruction file to help you replicate the result shown in the photos

Model dimensions Based on how the model is positioned on the print bed: • X: 228.40 / Y: 228.40 / Z: 162.86

Recommended slicers • Bambu Studio or PrusaSlicer

What you’ll need to print • Nozzle: 0.4mm or 0.8mm • Material: PLA or PETG

What you’ll need to assemble • E27 screw socket with two nuts — see photos for reference

Safety note • If you’re using PLA, the bulb must be a low-consumption LED. We also recommend this type of bulb if you’re using PETG • Always turn off the power before any installation