License: Free for personal use only. For commercial license & EXCLUSIVE models visit: https://www.patreon.com/FluffyTails

If you print the SMALL KEYCHAIN version in the .3mf file with H = 40.67 (excluding keyring negative part size), the tentacles might be stiff. You need to loosen them up. Please check the attached 12th picture.

🐙✨💜 Hey everyone! 💜✨🐙

I'm so excited to share this adorable Flexi Baby Fluffy Octopus with you all! This little ocean friend is full of charm, featuring cute expressive eyes, cute blushing cheeks, chubby tentacles, and a fully articulated design that wiggles and flexes with every movement 🐙💜

🌟 What's Included -🐙 Cute baby octopus design with an expressive face and lovable personality -🔗 Fully articulated print-in-place tentacles for smooth, satisfying movement -🔑 Keychain-ready version so your tiny sea buddy can accompany you everywhere -🧲 Magnet-ready version to decorate fridges, lockers, desks, and other magnetic surfaces -🎨 Multi-color friendly design (perfect for purples, pinks, blues, teals, whites, or your own creative color combinations!)

The model is optimized for easy printing on most FDM printers and prints without supports.

IMPORTANT: 🖨 Printing Notes: -Please clean the build plate with soap and water or IPA before printing -No supports needed -Use brims if you experience adhesion issues. -Keychain loop and magnet hole size can be adjusted or repositioned if desired (in the .3mf file) -.3mf file created using Bambu Studio -Recommended model size for instant flexibility and strength: H = 57.37 mm -If you print the small keychain version in the .3mf file with H = 40.67 (excluding keyring negative part size), the tentacles might be stiff. You need to loosen them up. Please check the 12th picture. -If you resize the model to a size other than the what is provided in the .3mf file, you need to reduce the layer height for the top portion of the octopus for getting a clean top print. -Magnet hole provided is of size 8.4 x 8.4 x 3.2 mm for a magnet of size 8 x 3 mm. Tolerance might need to be adjusted depending on filament used -Material used: PLA+ -Printer settings: 0.2 mm layer height, 2 walls, 15% infill -To avoid dark filament bleeding, the filament purge needs to be adjusted accordingly (multiplier at 1.2 - 1.3 or just increase the purge value from dark to light color to 1.3x and multiplier remains 1). In the .3mf file purge value is already adjusted for the given colors. -The .stl file does not contain keychain or magnet holes. A negative torus and cylinder can be added in the slicer respectively if needed -If you get any non-manifold warnings in your slicer, feel free to ignore them — the model prints perfectly fine

📦 Files Included 🐙 Flexi Baby Octopus Toy (fully articulated) 🔑 Keychain Version 🧲 Magnet Version 🎨 Multi-color Ready Files 📁 STL + 3MF Files

Thank you so much for supporting my work — it truly means the world to me and helps me continue creating fun and adorable creatures like this little octopus! 💛

If you print one, I'd absolutely love to see your makes. Feel free to share photos in the community and show off your color combinations!

Happy printing! 🖨✨🐙