Hii!! Happy Wednesday!

I am happy to release the gnomes!! I wanted to make them small and simple so they can get on with any vibe!

Gnome Flexi

• 3 walls, 15% gyroid or 3D honeycomb infill, no supports

• Tested up to 200%

Editing 3MF

• The 3mf models are split to parts. All the parts are located in the object list on the side panel. It is best not to color the objects manually using the fill tool and instead assign color to them from the object list to make the edges look cleaner. If a part you wish to color isn't on the object list, then you can use the fill tool to color it. Do not split to objects.

• Please note that 3MFs will load with a custom profile that I used to print these models. Double check your settings prior to printing.

Gnome home and stand

• At 100% scale 3 gnomes homes fit on each stand

• Stand and home do not need supports

• If the top of the home is tight fitting, try opening and closing it several times to loosen it up.

⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐

📌This model is for PERSONAL USE ONLY, to sell prints of these designs you will need to SUBSCRIBE TO THE MERCHANT PLAN available on my profile page - Click here📌