Helldivers 2 One True Flag spear tip made to screw onto a paint pole.

I'm able to print the top without supports just a brim to be safe, if you do use supports try not to have supports in the threads. I printed 6 walls and 25% gyroid I have a skinny hole through the middle of the model to generate walls in the middle in the hopes to add more strength. I have a pointed version and one with a ball tip for conventions since some cons don't allow points

I'm using a "Bestt Liebco" 4-8ft extending aluminum pole from Menards wrapped it with some hockey tape and added a pair of swivel flag rings to mount the flag to the pole. I used this pole setup with a different tip at Acen for the helldiver march this year

added the bottom spike! (it will need supports) its sized for a 25mm diameter pole got a decent friction fit but you can glue it on too. It's got threaded tips so you can swap them out if they get damaged, worn down or you need to follow convention rules. rounded is a good compromise, flat is for better traction with TPU if you use the pole as a trekking pole, and the pointed spike is more accurate looking and perhaps you could plant it into soft ground. add a solid non modular version of the round and spike just incase

Just added detailed bases and left the smooth ones in too and relabeled them as SIMPLE. you can choose to have a solid one-piece base be it detailed or smooth, or have a threaded base and use/replace tips detailed and smooth Aswell.

added a bigger model for larger pole head adapters so that bigger spear tip fits them better. (normal ones are about 25mm diameter the bigger one is 27mm.) but that spear head is now about 265mm tall so you may have to cut it in the slicer to fit most standard sized printers.