This is a redesign of my first ever wall planter - The Heywood. This version is compatible with The Vertical Rail, The Horizontal Rail, The Tripod Rail, and my original command strip wall mount.

Supports None needed!

Scaling I wouldn't recommend scaling the dovetail mounted versions since they are meant to fit with my universal dovetail system. The tabletop versions can be scaled however you like.

Orientation

• Everything prints upright with its bottom on the build plate
• The wall mount prints flat with the sliding dovetail facing up

Print Settings

• .2mm layer height
• 15% grid infill | 15% gyroid infill for wall mount
• 2 walls
• Set bridge flow to 1.6 for drip tray and wall mount

Filament

Bambu Lab Matte PLA

Colors I used:

• Latte Brown

Hardware

• #10 - #12 x 1-1/4" screws and anchors
• 3M Medium Picture Hanging Command Strips

Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/loftedgoods