As my next installment of birdhouse, I thought I'd go with a modern mid-century look and incorporate planters into it!

So here it is! Print it! It's neat!

Printing Instructions: Included are two versions of the roof. One without a planter and one without. The option with the planter does require supports.

When placing this outside I recommend using materials such as PETG, ASA/ABS, or Polymaker's HT-PLA.

Feel free to scale up if you feel it needs to be bigger. The clearances should be just fine.

While the 3mf files provided indicate that you need a multi-color system to print the rock wall, it will still look fantastic in a single color.

• Layer height: 0.2mm
• Supports: The optional roof that incorporates a planter on top does require supports
• Wall loops: Recommended 4-5 wall loops when printing with lighter color filaments. Everything else will do fine with 2-3 wall loops

Assembly: Please refer to the provided assembly guide for instructions

Filaments I used:

• Polymaker Matte Black PLA
• Push Plastic Desert Tan PLA
• Bambu Lab White PLA Basic
• Bambu Lab Ash Gray Matte PLA
• Bambu Lab Nardo Gray Matte PLA
• Bambu Lab Dark Chocolate Matte PLA
• Bambu Lab Cocoa Brown PLA Basic

Feel free to join my discord for additional support, questions, or suggestions!