Want full access to our catalog, PLUS the rights to sell physical prints of our designs on your Etsy, Ebay or Online Store? Check out our Commercial Membership!

Revisiting the Mushroom Theme with an all new take! This textured Mushroom Lamp - LUMI Shroome, is taller than our original Mushroom Lamp and offers a more modern and artistic approach. Making the design feel more elevated and elegant for your home!

Two Different Bases Available! - Offering both E27 and E14 styles to compensate for a range of lighting solutions and light bulbs!

Prints as separate parts in two colors - no AMS required. Supports not needed.

Instructions

1. Choose Your Base Style - E27 or E14
2. Get a lamp socket kit and a matching LED bulb for your chosen base! Under no circumstances should you use any other light than an LED, due to potential heat other options can put off. You can easily find the sockets with cord and switch on Amazon, Ikea or any local hardware store.
3. Print the base and the shade
4. Insert the socket and use the threaded secure ring that comes with to secure the shade to the base!
5. Insert the bulb
6. Enjoy Your New Lamp!!

Assembled Dimensions: 12in. x 9in. x 9in. (30.48 cm x 22.86 cm x 22.86 cm)

Full Lamp Printing Time: ~ 8.5 hours @ 0.2mm Filament Used: ~330g

Included .3mf includes all of the below settings already set up including a modifier block to restrict fuzzy skin from being in the cable cut out area. Download the .3mf, load it into your slicer and be good to go!

But just in case! Here are the settings ⬇️

Base Print Settings Layer Height: 0.2mm Infill: 5% Walls: 3

Fuzzy Skin Settings Fuzzy Skin: Contour Fuzzy Skin Generator Mode: Displacement Noise Type: Perlin Point Distance: 0.8mm Thickness: 0.5mm Noise Octaves: 6

Shade Print Settings Layer Height: 0.2mm Vase Mode: ON Smooth Vase Mode: ON Line Width: 0.6mm for ALL OPTIONS Bottom Shell Layers: 15

Filament Used JUSTMAKER PLA + - MATTE WHITE JUSTMAKER PLA+ - MATTE OLIVE GREEN