🎄 Christmas Rubber Duck STL – Santa Hat, Scarf & Boots | Build-a-Duck Add-On Bundle 🦆✨

Bring festive cheer to your duck this holiday season with the Christmas Add-On Bundle - a cozy and classic upgrade for your Build-a-Duck base model (sold separately). Perfect for Christmas décor, tiered trays, stocking stuffers, or selling finished prints!

This Christmas seasonal bundle includes:

• A classic Santa Hat with fluffy trim and pom-pom for that timeless holiday look
• A cozy Winter Scarf that adds warmth and personality to your duck
• A pair of Holiday Boots to complete the festive outfit
• Clean, bold holiday styling that pairs perfectly with your existing Build-a-Duck collection

Important: This listing includes STL files only for the Santa hat, scarf, and boots. You must own or purchase the Build-a-Duck Base Model to use this bundle.

https://than.gs/m/1534995

Features:

• NO AMS NEEDED: This model is designed to print by piece and color! You don’t need an AMS to print this model which also means it prints faster and with much less wasted filament.
• Modular Assembly: Pieces are designed for an easy, seamless fit with your base duck. Swap accessories without reprinting your full model! Minimal glue may be needed for permanent hold.
• Commercial License Included: Sell your finished prints with confidence — license included with purchase, no subscription required!

Included in This Listing:

• STL files for the Santa Hat, Scarf, and Boots (as shown in photos)
• Optimized, support-light design for easy printing
• Commercial license included — no subscription or extra fees needed

Whether you're decorating your home or adding to your product lineup, this festive duck is a must-have for the holiday season. Build your collection and bring your duck to life all year long!

SAFETY NOTE: Contains small parts that may present a choking hazard. Not suitable for young children or pets. For decorative use only.

🎁 Add a touch of Christmas charm to your duck and start building your seasonal collection today!

Assembly Note Some of the accessory pieces may have tight fits to hold parts together without glue. If you have issues with fit, please feel free to reach out to me and I will be happy to assist you. If your machine does not have very precise or accurate tolerances, you may want to scale the models up or adjust your precision settings. Scaling down model will not work as the tolerances will likely be too small for the pieces to fit.

For most accessories for this duck, you will be required to remove the head topper, head connector and/or wings. Glue is not needed for most of the parts of these models. We do recommend it when you want permanent adhesion and for certain small parts.

Assembled Dimensions at full size: Height: Approx 5.82” Width: Approx 3.59” Depth: Approx 4.52" Print tolerances vary by printer. The settings used in this print were in Bambu Studio, and printed on a Bambu X1C using a 0.4 nozzle printed at 0.20mm layer height Standard print quality settings. Filament used was PLA . Plate used was Bambu Textured PEI Plate.

Adding variable height, ironing or smaller layer heights will decrease the visibility of any lines even more than what is shown in the photos.

Recommended Print Settings:

• Supports – YES for some parts
• Support Type - TREE HYBRID
• Supports on Build Plate Only - NO
• Threshold Angle - 30 degrees
• Remove Small Overhangs - NO
• Brim – AUTO OUTER – Only on small pieces or if you have adhesion issues
• Top Z-Distance - .28 - IMPORTANT
• Bottom Z-Distance - .28 - IMPORTANT
• Layer Height – 0.2mm or smaller
• Nozzle Size – 0.4 or smaller
• Seam – position depends on piece and orientation on the plate
• Infill – 5 - 15%
• Wall Loops – 2+