3D model description The new improved track fidgets, built from the ground up, now perfectly tuned for strength and looks, improved in everyway possible

Simple to build requiring no additional parts - 100% 3D printed

Comes with 2 choices, the more rigid version or the faster and easier to spin track version, my fav is the easier to spin edition but both include the clicker and have almost identical print times

Build in approximately 30 seconds & print in multi color with just 1 color change or without the need for an AMS

No supports and with 1 color change the waste is almost non existent

Customise your very own with blank sides and the option for endless color combinations, want a matt single color with glow in the dark tracks, or maybe a silk tri color body with transparent tracks? the choice is up to you without the limits and worries of filament strength

Print in color in approximately 3 hours or less depending on your printer, the intelligent link system on the track allows for faster and easier print orientation making it as strong as possible and with the fastest print times possible

My fav fidget by far, check it out in the video link below

https://www.youtube.com/watch?v=vTWwZbuVJNk

3D printing settings Simple to print requiring no supports & only 1 color change (anyone without an AMS who wishes to print the track in multi color simply pause the print when printing the tracks near the top of the print)

Choose between either the regular or loose version (both require printing 2x cog wheels which are identical for either version

Please feel free to print in any color you wish however it is recommended to print just the spring only in regular PLA (any color as this is hidden inside)

Brim is required only on the top ends of the track, simply paint on using the brim feature (enabled by default in the supplied print profile)

I recommend printing the springs slowly at around 20mm/s, don't worry as the print time is already extremely fast

I recommend printing the sides with the lowest layer using the Hilbert curve pattern (enabled by default in the supplied print profiles) this is purely cosmetic however and completely your choice

Gyroid infill recommended

Please see the video in the Youtube link for simple build instructions, it takes less then 1 minute