(Note: The original file names are in Turkish. "Mi box yükseltici" translates to "Mi Box Riser".)

Elevate your Xiaomi Mi Box with this sleek, minimalist 5cm riser! I designed this stand to provide better airflow for the device, prevent overheating, and create a cleaner look by allowing cable management underneath.

Looking for more stability? This is the V1 Standard version. If you want an anti-slip version with a designated area for felt pads to protect your furniture, check out the V2 (Anti-Slip Felt Base) version in my profile!

File Formats: I have included STL, 3MF, and STEP files so you can print it immediately or easily remix and adjust the dimensions to fit your specific needs.

Files Included:

Mi box yükseltici v1.3mf Mi box yükseltici v1.STEP Mi box yükseltici v1.STL

Print & Test Details:

Test Print: Only 27 minutes. Use the included "Test" plate in the 3MF file to check the footprint before committing to the full print. Full Print: Takes approximately 1 hour and 39 minutes.

Recommended Print Settings (Optimized):

Layer Height: 0.20 mm Wall Loops: 3 (For extra perimeter strength) Bottom Shell Layers: 5 Infill Density: 3% (Gyroid) Supports: No Material: PLA

If you've enjoyed my work and would like to buy me a coffee to support my creative efforts, you can do so through the link below. Your generosity is greatly appreciated! Buy Me a Coffee: https://www.buymeacoffee.com/ahmetutkuozkan