PERFIS – Minimalist 3D Printed Tabletop Perfume Shelf
I designed PERFIS as a simple way to keep everyday things in one place, perfumes, skincare, small objects you actually use and want to see. The shape is soft and structured at the same time. The arches give it a bit of character, but it still stays quiet and minimal. It doesn’t try too hard, it just sits nicely wherever you put it.
No glue needed.
Just line up the pins, then push everything together slowly and evenly. It should click into place and hold on its own.
TIP: Use silicone legs (up to 10 mm diameter) for better grip.
Materials I used BambuLab Marble PLA (shelves) BambuLab PLA Matte Latte Brown (side parts)
Size 120 × 239 × 243 mm Minimum build plate: 250 × 250 mm
Quick note on bed adhesion: This model can be a bit sensitive, especially the side pieces. Make sure your build plate is properly cleaned with dish soap (not just IPA), avoid touching it after, and use glue or 3D lac if needed. A solid first layer makes all the difference here.




























I love your personal care solutions! I've always dreamed of having a rack to store/display my headbands. I was wondering if this convept could be adapted for such a purpose?